Hand tools and safety
Name the tools in a basic tool kit, learn what each is for, wear the right protection, and measure and mark accurately.
Stay safe. Eye protection for anything that cuts, drills or hammers. Keep blades sharp, cut away from your body, and keep children and pets clear.
Lessons, in order
- Know your hand tools #L373
Learn the 13 tools in a basic home tool kit: what each one is for, how to hold it and the common mistake to avoid. Tap the tool wall to name them, tick the ones you have, and test yourself on which tool fits the job. - Workshop safety #L374
Stay safe doing DIY at home: the right glasses, ear and dust protection, when not to wear gloves, clamping, cutting away from you, the 1 in 4 ladder rule, dust and fumes, small cuts and when to stop. Spot seven hazards in a workshop picture and test yourself. - Measure and mark #L375
Read a tape measure in millimetres and in inch fractions, use the sliding hook, mark with a V, draw square lines, check a corner with the 3-4-5 rule and check a level. Practise on a drawn tape with endless random readings.
Tools for this course
Wheel nut torque #T1010 See a typical wheel nut torque for your kind of vehicle or stud size, or type your handbook figure; convert N·m, lbf·ft and kgf·m; work out how hard to push on a brace of any length; and see the star order to tighten 4, 5, 6 or 8 nuts. Cut list #T1011 Type the length of the boards you can buy, the saw kerf and the pieces you need. The cut list packs them onto the fewest boards, draws each board with its cuts and offcut, and gives the waste and a list to copy or print. Millimetres or inches.
Each lesson has pictures for every step, a tick list you can print, something to try, and a short quiz. The lessons teach the basics: always follow the maker's instructions for your own car, tools and fixings, and call a professional when the lesson says so. Like every fibub page, it runs in your browser: no sign-up, nothing about you is saved.