Light carpentry
Saw a straight cut, drill and screw wood without splitting it, then put it together by building a simple shelf.
Stay safe. Clamp the work, not your hand. Unplug power tools before changing a bit or blade.
Lessons, in order
- Saw a straight cut #L376
Saw a straight, square cut in wood with a handsaw in seven illustrated steps: mark a square line, clamp the work, cut on the waste side of the line, start with short strokes and let the saw do the work. Try the kerf sim to see why the side of the line matters. - Drill and screw wood #L377
Join two pieces of wood with screws that pull tight and do not split the wood: pick the screw length, drill a clearance hole and a pilot hole, countersink, set the drill's clutch and drive straight. The screw picker suggests length, gauge and drill sizes. - Build a simple shelf #L378
Make a wooden wall shelf from one board and two brackets in nine illustrated steps: plan the size and load, cut and sand the board, screw on the brackets, finish it and hang it level. Label the parts, put the steps in order and check yourself.
Tools for this course
Cut list #T1011 Type the length of the boards you can buy, the saw kerf and the pieces you need. The cut list packs them onto the fewest boards, draws each board with its cuts and offcut, and gives the waste and a list to copy or print. Millimetres or inches. Shelf load #T1012 Work out how hard a wall shelf pulls on each screw. Type what goes on it (or pick books, plates or plants), the shelf depth and the bracket size, and see the pull-out and downward load per screw in kg and newtons, compared with your wall fixing's rating, with a side-view drawing of the forces.
Each lesson has pictures for every step, a tick list you can print, something to try, and a short quiz. The lessons teach the basics: always follow the maker's instructions for your own car, tools and fixings, and call a professional when the lesson says so. Like every fibub page, it runs in your browser: no sign-up, nothing about you is saved.