Home / Courses / Medical entrance (NEET) / Practice / Units, dimensions and errors

Units, dimensions and errors

Class 11 · 170 questions and templates for Medical entrance (NEET), in order from warm-up to top rank. Check each answer, then read the full solution.

New to this topic? Read the lesson first: Units, dimensions and errors.

Loading questions… (they need JavaScript; nothing you type is sent anywhere)

Written questions with solutions

The same questions as a list, so you can print them or read without the practice box. Templates (fresh numbers) appear only in the practice box above.

  1. MCQWarm-up

    Which of the following is not an SI base unit?
    1. kelvin
    2. newton
    3. mole
    4. candela
    Answer and solution

    Answer: B

    The seven SI base units are metre, kilogram, second, ampere, kelvin, mole and candela. Kelvin, mole and candela are base units. The newton is a derived unit: 1 N=1 kgms−2.
  2. MCQWarm-up

    The dimensional formula of force is
    1. [MLT−2]
    2. [ML2T−2]
    3. [MLT−1]
    4. [ML−1T−2]
    Answer and solution

    Answer: A

    Force = mass × acceleration. Mass is [M] and acceleration is [LT−2], so force is [MLT−2]. [ML2T−2] is energy, [MLT−1] is momentum and [ML−1T−2] is pressure.
  3. MCQWarm-up

    Power has the dimensional formula
    1. [ML2T−2]
    2. [MLT−3]
    3. [ML−1T−3]
    4. [ML2T−3]
    Answer and solution

    Answer: D

    Power = work / time = [ML2T−2]/[T]=[ML2T−3].
  4. NATWarm-up

    Convert a speed of 36 kmh−1 into ms−1.
    Answer and solution

    Answer: 10 m/s

    Multiply km/h by 10003600=518. So 36×518=10 m/s.
  5. NATWarm-up

    How many significant figures are there in the measurement 0.00450 m?
    Answer and solution

    Answer: 3

    Leading zeros only show the decimal place, so they do not count. The digits 4, 5 and the trailing 0 after the decimal point all count. That gives 3 significant figures.
  6. MCQWarm-up

    One light year is about
    1. 3×108 m
    2. 9.46×1012 m
    3. 9.46×1015 m
    4. 3.15×107 m
    Answer and solution

    Answer: C

    A light year is the distance light travels in one year: 3×108 m/s×3.15×107 s≈9.46×1015 m. 3×108 is the speed of light, and 3.15×107 is the number of seconds in a year.
  7. MCQWarm-up

    Angular momentum has dimensions
    1. [MLT−1]
    2. [ML2T−1]
    3. [ML2T−2]
    4. [ML2T−3]
    Answer and solution

    Answer: B

    Angular momentum L=mvr: [M][LT−1][L]=[ML2T−1].
  8. MCQWarm-up

    A student measures a length as 10.2 cm. The true value is 10.0 cm. The absolute error is
    1. 0.2 cm
    2. 2 cm
    3. 2 %
    4. 0.02 cm
    Answer and solution

    Answer: A

    Absolute error = |measured − true| = |10.2−10.0|=0.2 cm. The relative error would be 0.2/10.0=0.02, which is 2 %.
  9. MCQWarm-up

    The least count of an ordinary metre scale marked in millimetres is
    1. 1 cm
    2. 0.1 mm
    3. 1 m
    4. 1 mm
    Answer and solution

    Answer: D

    The least count is the smallest division the instrument can read. A scale marked in millimetres reads to 1 mm.
  10. MCQWarm-up

    Which of these physical quantities is dimensionless?
    1. Surface tension
    2. Frequency
    3. Refractive index
    4. Angular velocity
    Answer and solution

    Answer: C

    Refractive index is a ratio of two speeds, so it has no dimensions. Surface tension is [MT−2], and frequency and angular velocity are both [T−1].
  11. MCQWarm-up

    Statement I: The number 0.0050 has two significant figures.
    Statement II: Leading zeros are not significant.
    1. Both Statement I and Statement II are true
    2. Both Statement I and Statement II are false
    3. Statement I is true but Statement II is false
    4. Statement I is false but Statement II is true
    Answer and solution

    Answer: A

    Leading zeros show only the place of the decimal. The digits 5 and 0 count, giving two. Both statements are true.
  12. MCQStandard

    The dimensional formula of Planck's constant h (from E=hν) is
    1. [ML2T−2]
    2. [ML2T−1]
    3. [MLT−1]
    4. [ML2T]
    Answer and solution

    Answer: B

    h=E/ν=[ML2T−2]/[T−1]=[ML2T−1]. This is the same as angular momentum.
  13. MCQStandard

    The gravitational constant G in F=Gm1m2/r2 has dimensions
    1. [M−1L3T−2]
    2. [ML3T−2]
    3. [M−1L2T−2]
    4. [M−2L3T−2]
    Answer and solution

    Answer: A

    G=Fr2/(m1m2)=[MLT−2][L2]/[M2]=[M−1L3T−2].
  14. MCQStandard

    Which pair of quantities has the same dimensions?
    1. Force and impulse
    2. Pressure and force
    3. Momentum and energy
    4. Work and torque
    Answer and solution

    Answer: D

    Work and torque are both [ML2T−2]. Force is [MLT−2] but impulse is [MLT−1]. Pressure is force per area. Momentum is [MLT−1] and energy is [ML2T−2].

    Why people get this wrong: Same dimensions do not mean the same physical quantity: work is a scalar and torque is a vector.

  15. MCQStandard

    The coefficient of viscosity η has dimensions
    1. [MLT−1]
    2. [ML−1T−2]
    3. [ML−1T−1]
    4. [ML2T−1]
    Answer and solution

    Answer: C

    From F=6πηrv: η=F/(rv)=[MLT−2]/([L][LT−1])=[ML−1T−1].
  16. NATStandard

    1 N=10x dyne. Find x.
    Answer and solution

    Answer: 5

    1 N=1 kgms−2=1000 g×100 cm s−2=105 gcms−2. One dyne is 1 gcms−2. So x=5.
  17. NATStandard

    Express g=9.8 ms−2 in kmh−2.
    Answer and solution

    Answer: 127008 km/h² (±5)

    1 m=10−3 km and 1 s=1/3600 h, so 1 s−2=36002 h−2=1.296×107 h−2. Then 9.8×10−3×1.296×107=127008.

    Why people get this wrong: The time conversion factor is squared, since time appears squared.

  18. MCQStandard

    The ratio of the electric field to the magnetic field, E/B, has the dimensions of
    1. acceleration
    2. velocity
    3. force
    4. time
    Answer and solution

    Answer: B

    The Lorentz force gives qE and qvB the same dimensions, so E=vB in dimensions. Hence E/B has dimensions of velocity.
  19. MCQStandard

    A=(5.0±0.1) and B=(3.0±0.2). The sum A+B is
    1. 8.0±0.3
    2. 8.0±0.1
    3. 8.0±0.2
    4. 8.0±0.05
    Answer and solution

    Answer: A

    In a sum, absolute errors add: 0.1+0.2=0.3.
  20. NATStandard

    z=ab. The percentage errors in a and b are 2% and 3%. What is the maximum percentage error in z?
    Answer and solution

    Answer: 5

    For a product, relative errors add: 2%+3%=5%.
  21. NATStandard

    x=a3/b2. The percentage error in a is 1% and in b is 2%. Find the maximum percentage error in x.
    Answer and solution

    Answer: 7

    Powers multiply the relative error, and for a quotient the errors still add: 3×1+2×2=7%.

    Why people get this wrong: The error in a quotient is not the difference of errors.

  22. NATStandard

    In a vernier caliper, 1 main scale division (MSD) is 1 mm and 10 vernier divisions equal 9 MSD. Find the least count in cm.
    Answer and solution

    Answer: 0.01 cm (±0.0001)

    Least count = 1 MSD − 1 VSD. 10 VSD = 9 MSD gives 1 VSD = 0.9 mm. So LC = 1−0.9=0.1 mm =0.01 cm.
  23. MCQStandard

    A vernier scale has 10 divisions equal to 9 divisions of a main scale whose division is 0.5 mm. The least count is
    1. 0.5 mm
    2. 0.1 mm
    3. 0.45 mm
    4. 0.05 mm
    Answer and solution

    Answer: D

    LC = (value of 1 MSD)/(number of vernier divisions) = 0.5/10=0.05 mm. The 0.45 mm is the length of one vernier division, not the least count.
  24. MCQStandard

    A screw gauge has pitch 1 mm and 100 divisions on the circular scale. Its least count is
    1. 0.1 mm
    2. 1 mm
    3. 0.01 mm
    4. 0.001 mm
    Answer and solution

    Answer: C

    LC = pitch / number of circular divisions = 1/100=0.01 mm.
  25. MCQStandard

    Add 2.50 cm and 3.4 cm, and give the answer with the right number of significant figures.
    1. 5.90 cm
    2. 5.9 cm
    3. 5.8 cm
    4. 6 cm
    Answer and solution

    Answer: B

    2.50+3.4=5.90. In addition, the answer keeps as many decimal places as the least precise number, which has one decimal place. So the answer is 5.9 cm.

    Why people get this wrong: Addition follows decimal places; multiplication follows significant figures.

  26. MCQStandard

    The product 2.4×3.42 (both measured values) should be reported as
    1. 8.2
    2. 8.208
    3. 8.21
    4. 8
    Answer and solution

    Answer: A

    2.4×3.42=8.208. In multiplication, the answer has as many significant figures as the least precise factor. 2.4 has 2, so the answer is 8.2.
  27. MCQStandard

    The dimensions of surface tension are
    1. [MLT−2]
    2. [ML−1T−2]
    3. [ML2T−2]
    4. [MT−2]
    Answer and solution

    Answer: D

    Surface tension = force / length =[MLT−2]/[L]=[MT−2]. It is also energy / area.
  28. MCQStandard

    Which equation is dimensionally correct? (s: distance, u,v: speeds, a: acceleration, t: time)
    1. v=u+at2
    2. s=ut+at
    3. s=ut+12at2
    4. v2=u2+at
    Answer and solution

    Answer: C

    Check every term. ut is [L] and at2 is [L], so the first equation is consistent. In v=u+at2, at2 is a length but v is a speed. In s=ut+at, at is a speed but s is a length. In v2=u2+at, at is a speed but v2 is speed squared. Only the first passes.

    Why people get this wrong: A dimension check only rejects; it cannot confirm numerical factors such as the 2 in v2=u2+2as.

  29. MCQStandard

    Add 12.11, 18.0 and 1.012 and report the result correctly.
    1. 31.122
    2. 31.1
    3. 31.12
    4. 31
    Answer and solution

    Answer: B

    The sum is 31.122. The least precise number is 18.0 with one decimal place. So round to one decimal place: 31.1.
  30. MCQStandard

    1 kilowatt-hour equals
    1. 3.6×106 J
    2. 3.6×103 J
    3. 3.6×109 J
    4. 6×104 J
    Answer and solution

    Answer: A

    1 kWh=1000 W×3600 s=3.6×106 J.

← All topics