All lessons

Module 2: Units, dimensions and errors · Lesson 2.1 · about 30 min

Units, dimensions and errors

SI units, dimensional formulae, dimensional analysis (checking, deriving and converting), significant figures, how errors combine, and reading a vernier caliper and screw gauge, from basics to JEE Advanced depth.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 30 minutes. By the end you will be able to find the dimensions of any quantity, use them to check and derive formulae, combine errors correctly and read a vernier and a screw gauge.

Every physical quantity is a number times a unit, and every unit is built from a few base units. Keeping track of those building blocks (dimensions) lets you catch wrong formulae, guess right ones and see how measurement errors grow.

1. Base units and derived units

The SI system has seven base units. Every other unit is built from them.

Quantity Unit Symbol Dimension
Mass kilogram kg [M]
Length metre m [L]
Time second s [T]
Electric current ampere A [A] (some books write [I])
Temperature kelvin K [K] (or [θ])
Amount of substance mole mol [mol] (or [N])
Luminous intensity candela cd [cd] (or [J])

Since 2019 all seven are defined by fixing exact values of constants of nature, such as the speed of light (exactly 299 792 458 m/s) and the Planck constant. Two supplementary units are dimensionless: the radian (plane angle) and the steradian (solid angle).

A derived unit is a combination: speed in m/s, force in newtons (1 N = 1 kg m s⁻²), energy in joules (1 J = 1 N m).

2. Dimensions: the building blocks of a quantity

The dimensional formula of a quantity shows which powers of the base quantities it contains. Velocity is length divided by time, so [v]=[LT−1]. Force is mass times acceleration: [F]=[MLT−2].

Start from a defining formula you trust. Pressure = force / area.
Write each piece in dimensions. `$[F] = [MLT^{-2}]$`, `$[A] = [L^2]$`.
Divide powers. `$[P] = [MLT^{-2}]/[L^2] = [ML^{-1}T^{-2}]$`.
Notice the family. Stress, Young's modulus, bulk modulus and energy density have the same dimensions as pressure. Exams love asking which pair has the same dimensions.

Quantities worth knowing by heart:

Quantity Dimensions Quantity Dimensions
Work, energy, torque [ML2T−2] Power [ML2T−3]
Momentum, impulse [MLT−1] Angular momentum, Planck constant h [ML2T−1]
Pressure, stress, modulus [ML−1T−2] Surface tension, spring constant [MT−2]
Coefficient of viscosity [ML−1T−1] Gravitational constant G [M−1L3T−2]
Charge [AT] Voltage [ML2T−3A−1]
Resistance [ML2T−3A−2] Capacitance [M−1L−2T4A2]
Permittivity ε₀ [M−1L−3T4A2] Permeability μ₀ [MLT−2A−2]

“Torque and work are the same quantity because they have the same dimensions.” Same dimensions do not mean same quantity. Torque is a vector (force times lever arm); work is a scalar (force along a displacement). Equal dimensions are necessary for an equation to be right, never proof that it is.

3. Three uses of dimensional analysis

(a) Checking an equation. Every term added or equated must have the same dimensions (the principle of homogeneity). In s=ut+12at2, each term is [L], so the equation could be right.

(b) Deriving a relation. Suppose the period of a pendulum depends on its length l, the mass m and g. Write T=klambgc, so [T]=[L]a[M]b[LT−2]c. Matching powers: M gives b = 0, T gives −2c = 1, L gives a + c = 0. So T=kl/g. The method cannot find the number k (it is 2π), and it fails when the quantity depends on more than three base quantities, on a dimensionless number, or on a sum of terms.

(c) Converting units. A quantity is the same whatever the units, so n1[M1aL1bT1c]=n2[M2aL2bT2c]. Example: 1 J in CGS units (g, cm, s): n2=1×(1000)1(100)2(1)−2=107 erg.

[M], [L], [T]
the mass, length and time content of a quantity
Homogeneity
you can only add or equate things with the same dimensions
Dimensionless
angles, strain, refractive index, the argument of sin, log and ex
Physical meaning
Nature does not care about our units. A true law must stay true when you change from metres to centimetres, which is exactly what dimensional analysis checks.

A JEE favourite: in y=Asin⁡(ωt−kx) the bracket must be dimensionless, so [ω]=[T−1] and [k]=[L−1]. In P=abe−bx/(kT) (P a pressure, x a distance, kT an energy), first make the exponent dimensionless, so [b]=[kT]/[x]=[MLT−2]; then [a]=[P][b]=[M2T−4].

4. Significant figures

Significant figures are the digits you actually measured, plus one estimated digit.

  • All non-zero digits count. Zeros between them count (2005 has 4).
  • Leading zeros never count (0.0045 has 2).
  • Trailing zeros count if there is a decimal point (4.500 has 4; 4500 is ambiguous, so write 4.5×103 or 4.500×103).
  • Multiplying or dividing: keep as many significant figures as the least precise factor.
  • Adding or subtracting: keep as many decimal places as the least precise term.
  • Rounding: round half to even in strict work (2.745 → 2.74, 2.735 → 2.74); most exams accept ordinary rounding, so follow the question.

5. Errors and how they combine

For a measurement x with error Δx: absolute error Δx, relative error Δx/x, percentage error 100 Δx/x. The mean absolute error of repeated readings is the average of the sizes of their differences from the mean.

If the quantity is… its maximum error is…
Z=A±B ΔZ=ΔA+ΔB (absolute errors add, even when subtracting)
Z=AB or A/B ΔZZ=ΔAA+ΔBB
Z=ApBq/Cr ΔZZ=pΔAA+qΔBB+rΔCC

The quantity with the highest power contributes most, so measure it most carefully (in a pendulum, the period T, which is squared). Try it:

“Subtracting two quantities subtracts their errors.” Never. Errors are uncertainties: each can push the result either way, so the worst case always adds them. That is why the difference of two nearly equal numbers has a huge percentage error.

6. Reading a vernier caliper and a screw gauge

A vernier has N divisions that span N − 1 main-scale divisions. Its least count is 1 main division − 1 vernier division = (1/N) main division, 0.1 mm for the usual 10-division vernier.

Reading = main-scale reading + (coinciding vernier division × least count), then subtract the zero error (a positive zero error means the reading is too big).

Slide the length. Find the main-scale mark just left of the vernier zero, then the vernier line that lines up with a main-scale line (highlighted). Try the zero-error button.

A screw gauge works the same way: least count = pitch / number of circular-scale divisions (0.5 mm / 50 = 0.01 mm is common). Reading = main-scale reading + (circular-scale division × least count) − zero error. If the circular zero lies below the reference line when the jaws touch, the zero error is positive.

  • Seven SI base units; every other unit and dimension is built from them.
  • Find dimensions from a defining formula; memorise the common ones (energy [ML2T−2], pressure [ML−1T−2], h [ML2T−1], G [M−1L3T−2]).
  • Dimensional analysis checks equations, derives power-law relations (not the constant) and converts units.
  • Arguments of sin, log and exponentials must be dimensionless.
  • Errors add: absolute errors for sums and differences, relative errors times their powers for products, quotients and powers.
  • Vernier least count = 1 MSD − 1 VSD; screw gauge least count = pitch / circular divisions; always correct for zero error.

Check yourself

1What are the dimensions of the universal gravitational constant G?
2Length is measured as 2.0 cm with 1% error and time as 4.0 s with 2% error. What is the maximum percentage error in L/T²?
3How many significant figures does 0.004050 have?

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.