Module 3: Oscillations, waves and optics · Lesson 3.7 · about 50 min
Interference: Young, thin films, Newton's rings and Michelson
When two light waves add to make bright and dark fringes: coherence, the two-beam intensity formula, Young's double slit, thin films and the phase change on reflection, wedges, Newton's rings, the Michelson interferometer and coherence length.
Module 3 · about 50 minutes. By the end you will be able to say when two beams can interfere at all, find the intensity anywhere in a two-beam pattern, solve every standard Young’s double-slit variant (shifted, immersed, two colours, white light), get thin-film colours right by tracking the phase change on reflection, and use Newton’s rings and the Michelson interferometer to measure lengths a thousand times smaller than a millimetre.
1. Adding two waves
Two waves of the same frequency meet at a point. What adds is the field (the amplitude), not the brightness. If their amplitudes are and and they differ in phase by , the intensity (which goes as amplitude squared) is
The last term is the interference term. It makes the total bigger than where and smaller where . Averaged over many fringes it is zero, so no energy is created or destroyed; it is only moved from the dark places to the bright ones.
- Phase and path are linked by .
- Bright where the path difference is ; dark where it is .
- For equal beams (): , from to .
- For unequal beams: .
Coherence. The interference term only survives if stays fixed long enough to see. Two separate lamps emit in random, ever-changing phases, so their interference term averages to zero in a billionth of a second. To get fringes you split light from one source into two parts, by dividing the wavefront (two slits, Lloyd’s mirror, a biprism) or by dividing the amplitude (a thin film, a half-silvered mirror).
2. Young’s double slit
Light from one narrow slit falls on two slits a distance apart, and a screen is a distance away. At height on the screen the two paths differ by . Bright fringes are where this equals :
Play with the numbers below. Notice what changes the spacing and what does not.
- λ
- the wavelength: longer (redder) light gives wider fringes
- D
- slit-to-screen distance: further away, wider fringes
- d
- slit separation: slits closer together give wider fringes
- β = λD/d
- distance between neighbouring bright (or dark) fringes
- Physical meaning
- The pattern magnifies a wavelength (half a micrometre) up to millimetres by the large ratio D/d. That is how Young measured the wavelength of light in 1801 with a candle and a card.
Worked example. Light of 550 nm, slits 0.25 mm apart, screen 1.2 m away: m mm.
The variants examiners use
| Change | Effect |
|---|---|
| Whole set-up in a liquid of index | , so |
| Thin sheet (index , thickness ) over one slit | extra path ; pattern shifts by fringes towards the covered slit; unchanged |
| Source slit moved up | central fringe moves down; unchanged |
| Two wavelengths | bright fringes coincide where (lowest common multiple) |
| White light | central fringe white, then coloured fringes (violet inside, red outside), then a washed-out grey |
| Unequal slits | minima are no longer black; visibility |
Worked example. A sheet of index 1.6 and thickness 6 μm covers one slit, with nm. Extra path m , so the whole pattern slides 6 fringe widths towards that slit. The trap is instead of : the sheet replaces a layer of air that was already there.
Lloyd’s mirror and the biprism are two more ways to make two coherent sources from one. In Lloyd’s mirror the second source is the slit’s reflection in a glass plate at grazing incidence; the fringe at zero path difference is dark, which proves that reflection off a denser medium adds a phase of . A Fresnel biprism of angle and index , a distance from the slit, makes two virtual sources apart. The Double slit tool lets you explore all of these interactively.
3. Thin films: the phase change rule
Light hitting a thin film reflects off both its surfaces. The two reflected beams interfere. You need two ingredients:
- Extra path. The beam from the back surface travels further (thickness , index , the angle inside the film; at normal incidence).
- Phase change on reflection. Reflection going from a lower index into a higher one adds a phase of (half a wavelength). Reflection from higher to lower adds nothing.
Count the shifts and pick the condition:
| shifts | Reflection bright | Reflection dark | Example |
|---|---|---|---|
| one (soap film in air, oil on water) | very thin film looks black | ||
| zero or two (coating on glass, ) | anti-reflection coating |
Transmitted light is always the opposite of reflected light: energy that does not reflect goes through.
Worked example. A soap film () 300 nm thick is lit by white light. One shift, so reflection is strongest when : nm. Only 532 nm is visible: the film looks green.
Anti-reflection coatings. A layer of MgF₂ () on glass () has two shifts, which cancel. Destructive interference needs , so nm for green light: a “quarter-wave” layer. The cancellation is perfect only if . The Thin-film coating simulator shows the full reflectance curve, and the Thin film tool works backwards from measured colours to the thickness.
Wedges. Two flat plates touching at one edge with a small angle between them make a wedge of air. The thickness grows linearly, so the fringes are straight, equally spaced lines, apart. Counting fringes measures the thickness of a hair or a sheet of paper placed at the open end.
“Zero thickness means zero path difference, so it must be bright.” Only if both reflections behave the same. In a soap film or Newton’s rings with air, one reflection gains and the other does not, so the zero-thickness point is dark. In the exam, never write a bright or dark condition until you have counted the shifts. Put a liquid of index 1.6 between glass of 1.5 and 1.7 and both reflections gain : now the centre is bright.
4. Newton’s rings
A lens of large radius of curvature rests on a flat glass plate. The air gap at distance from the contact point is , so the fringes are circles. With one shift (air gap), dark rings need :
The radius grows as , so the rings crowd together as you go out. Measuring a difference of squared diameters removes the error from dust at the contact point. With a liquid of index in the gap, : every ring shrinks by .
Worked example. With m and nm, the 4th dark ring has mm.
5. The Michelson interferometer
A half-silvered mirror splits a beam into two arms; mirrors at the ends send the beams back to recombine. If one mirror moves by , its beam’s path changes by (there and back), and one fringe passes for every wavelength:
Worked example. With a 633 nm laser, counting 200 fringes means the mirror moved nm m. Uses that come up in JAM:
- Refractive index of a gas. A cell of length in one arm, slowly emptied: .
- Close doublets. With the sodium lines, fringes fade and return each time the mirror moves mm.
- Circular fringes. The rings satisfy ; as they collapse into the centre and the field becomes uniform.
- Compensating plate. It gives both beams the same thickness of glass, which you need to see white-light fringes and so find exact zero path difference.
6. Coherence length and visibility
No source is perfectly monochromatic. Light with spread stays in step only over the coherence length
Beyond that path difference, fringes fade. White light ( nm) has m, which is why thin-film colours are seen only in very thin films; a good laser has of metres. The visibility measures the contrast; for a single spectral line, its fall-off with path difference is the Fourier transform of the line’s shape. A source of finite size limits the slit separation that still gives fringes (spatial coherence), which Michelson used to measure the angular diameters of stars.
- Amplitudes add, not intensities: , with path difference . Equal beams: .
- Only coherent beams (split from one source) interfere. Division of wavefront: slits, Lloyd’s mirror, biprism. Division of amplitude: films, beam splitters.
- Young: . In a liquid ; a sheet shifts the pattern by fringes towards it.
- Thin films: count the shifts (low to high index) before writing or . Quarter-wave coating .
- Newton’s rings: for dark rings; use .
- Michelson: ; gas cell ; coherence length .
Practise: exam questions on this lesson
They start easy and climb to top-rank level. More on the interference practice page.
Next: lesson 3.8 explains what happens inside each slit (diffraction) and how many slits together make a grating. The thin-film rules return in lesson 3.9 on polarisation and in X-ray diffraction (lesson 7.2).
Go deeper: GATE Physics works out the reflection phases behind thin films exactly in the Fresnel equations, and the coherence of laser light in Einstein coefficients and lasers.
Check yourself
Sources
- E. Hecht, Optics, 5th ed. (2017), chapter 9: interference
- F. A. Jenkins and H. E. White, Fundamentals of Optics, 4th ed. (1976), chapters 13 and 14
- A. Ghatak, Optics, 7th ed. (2020), chapters 14 to 17
- IIT JAM Physics syllabus (Oscillations, Waves and Optics section), published by the organising IIT each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.