Home / Learn / Exam prep / IIT JAM Physics / Lesson 7.1
All lessons

Module 7: Solid state physics and electronics · Lesson 7.1 · about 45 min

Crystal structure, lattices and Miller indices

What a lattice and a basis are, the 14 Bravais lattices, the sc, bcc, fcc, diamond, NaCl and CsCl structures, packing fractions and densities, and how to name planes and directions with Miller indices and find their spacing.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 7 · about 45 minutes. By the end you will be able to tell a lattice from a crystal structure, count atoms in any cubic cell, work out packing fractions, densities and neighbour distances, and move between a plane’s intercepts, its Miller indices and its spacing. Every later lesson on solids (X-ray diffraction, bands, semiconductors) is built on this vocabulary.

A crystal is one small pattern of atoms repeated on an endless grid of points. Name the grid, name the pattern, and you have described every atom in the solid.

1. Lattice + basis = crystal

Look at a tiled floor. Ignore the tiles for a moment and put a dot at the same corner of every tile: the dots form a grid that repeats perfectly. That grid of points is a lattice. Now put back one tile at each dot: the tile is the basis.

crystal structure=lattice+basis

A lattice is defined by its primitive vectors a→1,a→2,a→3: every lattice point sits at

R→=n1a→1+n2a→2+n3a→3,n1,n2,n3 integers

The test of a lattice point is simple and strict: the view from every lattice point must be exactly the same, in every direction. Keep this test in mind; it settles most trick questions.

Lattice
an infinite set of points, all with identical surroundings; pure geometry, no atoms
Basis
the group of atoms attached to each lattice point (one atom in copper, two in silicon)
Unit cell
a box that tiles space when repeated by lattice vectors
Primitive cell
the smallest such box: it holds exactly one lattice point
Conventional cell
a larger box chosen because it shows the symmetry clearly, like the cube for bcc and fcc
Physical meaning
The lattice says how the pattern repeats; the basis says what is repeated. Two crystals with the same lattice can look completely different (copper and salt are both fcc).

2. The 14 Bravais lattices

How many genuinely different lattices are there? In two dimensions, 5: oblique, rectangular, centred rectangular, square and hexagonal. In three dimensions, the answer found by Auguste Bravais is 14, grouped into 7 crystal systems by the shape of their cell:

System Cell Lattices
Cubic a=b=c, all angles 90∘ simple (P), body-centred (I), face-centred (F)
Tetragonal a=b≠c, all 90∘ P, I
Orthorhombic a≠b≠c, all 90∘ P, I, F, base-centred (C)
Hexagonal a=b≠c, γ=120∘ P
Trigonal a=b=c, equal angles ≠90∘ rhombohedral (R)
Monoclinic one angle ≠90∘ P, C
Triclinic nothing equal P

Why are some centrings missing? Because they give nothing new. A “base-centred cubic” lattice loses its 3-fold axes and turns out to be simple tetragonal with a smaller cell; “face-centred tetragonal” is the same as body-centred tetragonal. Examiners love asking which of these is not a Bravais lattice.

Symmetry is restricted too. A lattice can only have 1, 2, 3, 4 or 6-fold rotation axes: a rotation must carry lattice vectors into lattice vectors, which forces 1+2cos⁡θ to be a whole number. Five-fold symmetry is impossible, just as you cannot tile a floor with regular pentagons. (Quasicrystals show 5-fold diffraction because they are ordered but not periodic.)

3. The cubic cells: count, touch, pack

Most exam questions use three cubic lattices. Turn the cells below and switch to “touching spheres” to see where the atoms meet.

Corner atoms are shared by 8 cells, face atoms by 2, body-centre atoms by none. With touching spheres you can see the line along which the atoms meet: an edge (sc), a body diagonal (bcc), a face diagonal (fcc) or a tetrahedral bond (diamond).

Every number follows from two facts: how many atoms the cube owns, and along which line the atoms touch.

sc bcc fcc (ccp) diamond
Atoms per cube n 1 2 4 8
Atoms touch along edge body diagonal face diagonal quarter body diagonal
Radius r a/2 3a/4 2a/4 3a/8
Nearest neighbours 6 at a 8 at 3a/2 12 at a/2 4 at 3a/4
Packing fraction 0.524 0.680 0.740 0.340
Primitive cell volume a3 a3/2 a3/4 a3/4

The packing fraction is the fraction of space the hard spheres fill:

PF=n⋅43πr3a3

Worked example (bcc). n=2, r=3a/4. Then PF=2⋅43π(33/64)a3a3=3π8=0.680. Notice that a cancels: packing depends only on the geometry, not on the size.

The density of a crystal follows from the same count:

ρ=nMNAa3

Worked example. Copper is fcc with a=3.61 Å and M=63.55 g/mol.

  1. a3=(3.61×10−8 cm)3=4.705×10−23 cm³. (Always convert Å to cm: 1 Å =10−8 cm.)
  2. ρ=4×63.556.022×1023×4.705×10−23=8.97 g/cm³, close to the measured 8.96.

Run it backwards and density, lattice constant and molar mass tell you n, and so the structure.

4. Real structures: lattice plus basis

  • Close packing. Stack layers of touching spheres. Each new layer sits in the hollows of the one below. The order ABAB… gives hcp, ABCABC… gives fcc; both fill 74% of space and give every atom 12 neighbours. For ideal hcp, c/a=8/3=1.633. The close-packed layers of fcc are its (111) planes.
  • Diamond (C, Si, Ge): fcc lattice with a basis of two identical atoms at (0,0,0) and (14,14,14)a. Each atom bonds to 4 others in a tetrahedron. Zinc blende (GaAs, ZnS) is the same with two different atoms.
  • Rock salt (NaCl, KCl, MgO): fcc lattice, basis Na at (0,0,0) and Cl at (12,0,0)a. Four formula units per cube; each ion has 6 neighbours of the other kind.
  • Caesium chloride (CsCl, CuZn): Cs at the corners, Cl at the body centre. The picture looks bcc, but the centre is a different ion, so the lattice is simple cubic with a two-ion basis; coordination 8.
  • Graphene: a honeycomb. Neighbouring atoms see their bonds in mirror-image directions, so the honeycomb is not a Bravais lattice; it is a hexagonal lattice with a two-atom basis.

Holes between the spheres matter for alloys and ionic crystals. In fcc there are 4 octahedral holes per cube (radius up to 0.414r) and 8 tetrahedral ones (0.225r).

“bcc means there is an atom at the body centre.” Not quite. bcc is a statement about the lattice: the body centre must be an identical lattice point. In CsCl the body-centre ion differs from the corner ions, so CsCl is simple cubic, not bcc. The same test explains why NaCl is fcc (look at the Na ions only) and why the honeycomb is not a lattice. Whenever you are unsure, ask: does the view from this point look exactly the same as from that one?

5. Miller indices: naming planes

Crystals break, grow and diffract along planes of atoms, so we need a name for each family of parallel planes. The recipe for the Miller indices (hkl):

Find the intercepts. Where does the plane cut the three axes, in units of a, b, c? A plane parallel to an axis cuts it at infinity.

Take reciprocals. 1/∞ = 0, so a plane parallel to an axis gets index 0.

Clear fractions. Multiply by the smallest number that makes all three whole numbers, and remove any common factor.

Mark negatives with a bar. An intercept on the negative side of an axis gives a bar over that index, such as (1 1̄ 0).

Worked example. A plane cuts the axes at 3a, 2b and c. Reciprocals: 13,12,1. Multiply by 6: (236).

Notation you must keep straight:

Written Means
(hkl) one family of parallel planes
{hkl} all planes equivalent by symmetry (in a cube, {100} = the 6 faces)
[uvw] a direction: the vector ua→+vb→+wc→
⟨uvw⟩ all directions equivalent by symmetry

Play with the indices below. Negative indices move the origin to the far corner; the dashed outlines are the neighbouring planes of the same family.

Larger indices give planes that are more steeply tilted and closer together. Setting an index to 0 makes the plane parallel to that axis.

Two facts are true only in cubic crystals:

  1. The direction [hkl] is perpendicular to the plane (hkl). So angles between planes are angles between their index vectors: cos⁡θ=h1h2+k1k2+l1l2h12+k12+l12h22+k22+l22.
  2. The spacing between neighbouring planes is
dhkl=ah2+k2+l2

For axes at right angles but unequal lengths (tetragonal, orthorhombic), use 1/d2=h2/a2+k2/b2+l2/c2. For hexagonal crystals the four-index notation (hkil) adds i=−(h+k) so that symmetry-related planes have permuted indices.

Worked example. Find the spacing of (111) and (220) planes in a cubic crystal with a=5.43 Å, and the angle between (111) and (11‾1).

  1. d111=5.43/3=3.135 Å; d220=5.43/8=1.920 Å.
  2. cos⁡θ=(1−1+1)/3=1/3, so θ=70.5∘.

The direction common to two planes (their zone axis) is the cross product of their indices. And a warning that catches strong students: in fcc and bcc the formula above uses the conventional cube, but centring adds extra lattice planes. In fcc, real lattice planes parallel to (100) are a/2 apart, not a. This is exactly why some X-ray reflections go missing, as the next lesson shows.

6. Planar density and the reciprocal lattice

How crowded a plane is decides how easily it slips and how strongly it diffracts. Count atoms the same way as in a cell, but now with area shares: a corner of a square face counts 14, a corner of the 60∘ triangle cut by (111) counts 16.

Worked example. fcc (111): the plane cuts the cube in a triangle of side 2a and area 32a2, holding 3×16+3×12=2 atoms. Density =4/(3a2), the highest of any fcc plane, which is why metals like copper slip on {111}.

GATE and NET go one step further. The reciprocal lattice has vectors b→i with a→i⋅b→j=2πδij. Each reciprocal vector G→hkl=hb→1+kb→2+lb→3 is perpendicular to the (hkl) planes and has length 2π/dhkl, so one point stands for a whole family of planes. The reciprocal of simple cubic is simple cubic; the reciprocal of fcc is bcc (cube edge 4π/a) and vice versa. The Wigner-Seitz cell of the reciprocal lattice is the first Brillouin zone, the stage for electron bands.

To see these cells in 3D, the Brillouin zone viewer draws any lattice with its reciprocal lattice and zones, the Miller index calculator gives spacings and angles for every crystal system, and the CIF viewer opens real crystal structure files.

  • Crystal = lattice + basis. A lattice point must have exactly the same surroundings as every other.
  • 14 Bravais lattices in 7 systems (5 in 2D). Only 1, 2, 3, 4 and 6-fold axes are allowed.
  • sc / bcc / fcc / diamond: n = 1 / 2 / 4 / 8; neighbours 6 / 8 / 12 / 4; packing 0.52 / 0.68 / 0.74 / 0.34.
  • ρ=nM/(NAa3); convert Å to cm.
  • CsCl is simple cubic with a basis; NaCl and diamond are fcc with two-atom bases; hcp and fcc are both close packed.
  • Miller indices: reciprocals of intercepts, cleared of fractions. Cubic: d=a/h2+k2+l2 and [hkl]⟂(hkl).
  • Reciprocal lattice: |G→hkl|=2π/dhkl; fcc and bcc are each other’s reciprocals.

Practise: exam questions on this lesson

They start easy and climb to top-rank level. Check each answer, then read the full solution. There are more on the crystal structure practice page.

Next: lesson 7.2 shines X-rays on these planes and uses Bragg’s law to measure them. The GATE Physics course builds on the reciprocal lattice for diffraction, phonons and electron bands.

Check yourself

1How many atoms does one conventional unit cell of a face-centred cubic metal contain?
2A plane cuts the cubic axes at 2a, 2a and a. What are its Miller indices?
3Caesium chloride has Cs at the cube corners and Cl at the body centre. What is its Bravais lattice?

Sources

  • C. Kittel, Introduction to Solid State Physics, 8th ed. (2005), chapters 1 and 2
  • N. W. Ashcroft and N. D. Mermin, Solid State Physics (1976), chapters 4 and 5
  • S. O. Pillai, Solid State Physics, 9th ed. (2020), chapters on crystal structure
  • IIT JAM Physics syllabus (Solid State Physics, Devices and Electronics section), published by the organising IIT each year

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.