Home / Learn / Exam prep / IIT JAM Physics / Lesson 2.5
All lessons

Module 2: Mechanics and properties of matter · Lesson 2.5 · about 40 min

Moment of inertia and the axis theorems

What moment of inertia measures, how to find it for any body by slicing, the parallel and perpendicular axis theorems, bodies with holes, radius of gyration, rolling, the physical pendulum and a first look at the inertia tensor.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Module 2 · about 40 minutes. By the end you will be able to find the moment of inertia of any standard body without a table, move between axes with the parallel and perpendicular axis theorems, handle bodies with holes and non-uniform density, and use moments of inertia in rolling and pendulum problems. The last section previews the inertia tensor for GATE and NET.

Moment of inertia is how hard a body is to spin about a given axis, and it depends on how far its mass lies from that axis, not just on how much mass there is.

1. What moment of inertia measures

In straight-line motion, mass resists changes of velocity. In rotation about a fixed axis, the moment of inertia resists changes of angular velocity:

I=∑imiri2=∫r2dm,K=12Iω2,L=Iω,τ=Iα

Here r is the perpendicular distance from the axis, not the distance from the origin. Because it enters squared, mass far from the axis counts for much more: that is why a flywheel has a heavy rim and a figure skater spins faster with her arms pulled in.

I = ∫ r² dm
every bit of mass, weighted by the square of its distance from the axis
k (radius of gyration)
the distance at which all the mass would give the same I: I = Mk²
Same body, new axis
a new moment of inertia: I always belongs to a body and an axis together
Physical meaning
I is to turning what mass is to pushing. A wheel with its mass at the rim is harder to start and stop spinning than a solid disc of the same mass.

2. Computing I by slicing

The strategy is always the same: cut the body into pieces whose moment of inertia you already know, and add them up.

  • Thin rod, axis through the centre, perpendicular: pieces dm=(M/L)dx at distance |x|: I=∫−L/2L/2x2MLdx=112ML2. About one end: 13ML2.
  • Ring about its axis: all the mass at R: MR2.
  • Disc about its axis: rings of radius r, mass dm=2MR2rdr: I=2MR2∫0Rr3dr=12MR2.
  • Thin spherical shell: Ix+Iy+Iz=2∑mr2=2MR2, and the three are equal by symmetry: 23MR2.
  • Solid sphere: shells of mass dm=3MR3r2dr, each giving 23r2dm: I=2MR3∫0Rr4dr=25MR2.
Body (mass M) Axis I
Thin rod, length L through centre, perpendicular 112ML2
Thin rod, length L through one end, perpendicular 13ML2
Ring, radius R central, perpendicular to plane MR2
Disc or solid cylinder, radius R central axis 12MR2
Disc, radius R a diameter 14MR2
Thin spherical shell a diameter 23MR2
Solid sphere a diameter 25MR2
Rectangular plate a × b central, perpendicular to plate 112M(a2+b2)
Solid cone, base radius R its axis 310MR2

You do not need to memorise this table if you can do the slicing; JAM rewards people who can.

3. The parallel axis theorem

If you know Icm about an axis through the centre of mass, the moment about any parallel axis a distance d away is

I=Icm+Md2

Why it is true, step by step:

Split each position. Measure positions in the plane perpendicular to the axis. For each bit of mass, write its position from the new axis as d + r′, where r′ is measured from the centre of mass.

Square it. |d + r′|² = d² + 2d·r′ + r′².

Add up over the body. ∫r′² dm = Icm, ∫d² dm = Md², and the middle term is 2d·∫r′ dm.

The middle term vanishes. ∫r′ dm = 0, because r′ is measured from the centre of mass. That is the definition of the centre of mass.

Result. I = Icm + Md². The proof needs one axis through the centre of mass; it says nothing about the shape, so it works for solid bodies too.

Slide the axis away from the centre of mass: the moment of inertia climbs along a parabola. Its lowest point is always at the centre of mass.

Worked example. A rod of mass 0.48 kg and length 1 m turns about a point 0.25 m from one end. That point is L/4 from the centre, so I=112ML2+M(L/4)2=748ML2=0.07 kg m². Adding M(0.25)2 to the end value 13ML2 would be wrong: neither the end nor the new point is the centre of mass.

4. The perpendicular axis theorem (flat bodies only)

For a lamina in the xy-plane, with the three axes meeting at a point of the plane:

Iz=Ix+Iy

It follows from x2+y2=r2 when every particle has z=0. It is the fastest way to get in-plane moments:

Worked example. A disc about a diameter. Two perpendicular diameters have equal moments by symmetry and add up to 12MR2, so each is 14MR2. A ring about a diameter: 12MR2. A ring about a tangent in its plane: 12MR2+MR2=32MR2 (perpendicular theorem, then parallel theorem).

“The perpendicular axis theorem works for a sphere or a cube.” It does not. For a solid body Ix+Iy=Iz+2∫z2dm, which is larger than Iz. For a sphere, 25MR2+25MR2≠25MR2. Use it only for flat bodies, and use the parallel axis theorem only from the centre of mass.

5. Composite bodies and holes

Moments of inertia about the same axis simply add. A hole is a piece with “negative mass”: compute the full body, then subtract the missing piece, shifted to the same axis.

Worked example. A uniform disc of radius 2 m had a mass of 16 kg. A hole of radius 1 m is cut with its centre 1 m from the disc’s centre. About the original central axis:

  1. Full disc: 12×16×4=32 kg m².
  2. The hole has a quarter of the area, so 4 kg. About its own centre 12×4×1=2; shifted 1 m: 2+4×12=6 kg m².
  3. What is left: 32−6=26 kg m².

Non-uniform bodies work the same way with a density inside the integral. A disc with surface density σ=kr has I=35MR2, more than a uniform disc because its mass is pushed outward.

6. Using I: rolling and the physical pendulum

Rolling without slipping (v=ωR): kinetic energy 12Mv2(1+I/MR2), and down a slope

a=gsin⁡θ1+I/MR2

Only the shape factor I/MR2 matters, so in a race down a slope a solid sphere (25) beats a disc (12), which beats a hollow sphere (23), which beats a ring (1), whatever their masses and sizes.

Physical pendulum: a body pivoted at distance d from its centre of mass swings with

T=2πIpivotMgd=2πk2+d2gd

Worked example. A uniform rod 1.5 m long pivoted at one end: I=13ML2 and d=L/2, so T=2π2L/3g≈2.01 s. The period is shortest when the pivot is at d=k from the centre of mass.

To check a moment of inertia for your own shape, use the moment of inertia calculator.

7. Beyond JAM: the inertia tensor

For rotation about an axis that is not fixed in advance, one number is not enough. The inertia tensor collects nine numbers:

Ixx=∑m(y2+z2),Ixy=−∑mxy,L→=𝖨ω→,Inˆ=nˆT𝖨nˆ

It is real and symmetric, so there are always three perpendicular principal axes where the products of inertia vanish and L→∥ω→. A symmetry axis is always principal. For a uniform cube about its centre all three principal moments equal 16Ma2, so every axis through the centre, even a body diagonal, has that same moment. At a corner of a square plate the edges are not principal axes, because Ixy=−14Ma2≠0 there. GATE takes this further in rigid body dynamics.

  • I=∫r⟂2dm about a stated axis; K=12Iω2, L=Iω, τ=Iα; I=Mk2 defines the radius of gyration.
  • Find any I by slicing into rods, rings, discs or shells. Know rod 112/13, ring 1, disc 12, shell 23, solid sphere 25.
  • Parallel axis: I=Icm+Md2, always starting from the centre of mass; I is least about the centre of mass.
  • Perpendicular axis: Iz=Ix+Iy, flat bodies only.
  • Holes: subtract the missing piece’s moment about the same axis (including its Md2).
  • Rolling: a=gsin⁡θ/(1+I/MR2). Physical pendulum: T=2π(k2+d2)/gd, shortest at d=k.

Practise: exam questions on this lesson

They start easy and climb to top-rank level. More on the moment of inertia practice page.

Before this: lesson 2.4, central forces and orbits. Next: lesson 2.6 puts these moments to work in rotation, rolling and angular momentum.

Go deeper: the inertia tensor, principal axes and Euler’s equations are worked out in full in GATE’s rigid body dynamics.

Check yourself

1A ring and a disc have the same mass and radius. About their central axes (perpendicular to their planes), which has the larger moment of inertia?
2The perpendicular axis theorem I_z = I_x + I_y can be used for
3Of all the axes pointing in one given direction, which gives a body its smallest moment of inertia?

Sources

  • D. Kleppner and R. Kolenkow, An Introduction to Mechanics, 2nd ed. (2014), chapter 7
  • J. R. Taylor, Classical Mechanics (2005), chapter 10: rotational motion of rigid bodies
  • H. Goldstein, C. Poole and J. Safko, Classical Mechanics, 3rd ed. (2002), chapter 5
  • IIT JAM Physics syllabus (Mechanics and General Properties of Matter), published by the organising IIT each year

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Not affiliated with IIT or the JAM organising institute. Exam pattern as published for recent years: always check the official JAM website before the exam. All questions are original.