Module 1: Mathematical physics · Lesson 1.9 · about 60 min
Tensors
Index notation and the summation convention, the Kronecker delta and Levi-Civita symbol with the epsilon-delta identity, how tensors transform under rotations, invariants, symmetric and antisymmetric parts, counting components, isotropic tensors and the quotient law, the inertia, stress and elasticity tensors, the metric with upper and lower indices, and Christoffel symbols in curvilinear coordinates.
Module 1 · about 60 minutes. By the end you will be able to read and simplify index expressions with the summation convention, use the epsilon-delta identity to prove vector identities in a line, rotate a tensor and find its principal axes, count independent components, recognise invariants and isotropic tensors, and work with a metric: raising and lowering indices, line elements, volume factors and Christoffel symbols. Matrices and eigenvalues are in lesson 1.2; the vector calculus behind it in the JAM lesson on vector calculus.
1. Index notation
A repeated index is summed (summation convention); an unrepeated index is free, and the number of free indices is the rank. (rank 0), (rank 1), (rank 2, the outer product). A repeated index is a dummy: rename it freely, but never use the same letter three times in one term.
Two special symbols:
- Kronecker delta : 1 if , else 0. It renames indices, , and (3 in space).
- Levi-Civita : for even permutations of 123, for odd ones, 0 if any two indices are equal. and (the determinant).
The one identity that does most of the work:
Contracting further: and . In dimensions, contracting pairs gives .
Worked example. . And , with no cross products computed.
A symmetric and an antisymmetric pair always contract to zero: , .
2. How tensors transform
Under a rotation (with ), each index gets one factor of :
So a rank- tensor in dimensions has components. The quotient law turns this around: if is a vector for every vector , then is a rank-2 tensor. That is how we know the inertia tensor is a tensor (), and the conductivity ().
Invariants. is a similarity transformation, so the eigenvalues, the trace and the determinant do not change. Single components do.
Worked example (2D rotation). . In axes rotated by , : at , ; and , so the trace stays 4. In general, for a symmetric tensor the off-diagonal part vanishes when
For , , , principal values . The off-diagonal component peaks at from the principal axes, at half the difference of the principal values (the maximum shear of Mohr’s circle).
- Free index
- an index that appears once in a term; there is one equation per value of it
- Contraction
- setting two indices equal and summing; it lowers the rank by two
- Invariant
- a number built from a tensor that is the same in every frame (trace, determinant, eigenvalues)
- Isotropic tensor
- one whose components are the same in every rotated frame (δ, ε and products of δs)
- Metric g_ij
- the tensor that turns coordinate steps into lengths, ds² = g_ij dx^i dx^j
- Physical meaning
- A tensor is a machine that takes directions in and gives physical quantities out: the inertia tensor takes the spin axis and returns angular momentum, the stress tensor takes a surface normal and returns the force per area on it.
3. Symmetry, counting and isotropy
Any rank-2 tensor splits as with and . The trace is all in . In 3D the antisymmetric part has 3 components and is equivalent to an axial vector (the rotation part of a velocity gradient, or inside the field tensor).
Counting independent components of rank in dimensions:
| kind | count | examples |
|---|---|---|
| general | rank 3 in 4D: 64 | |
| symmetric rank 2 | inertia, stress (3D): 6; metric (4D): 10 | |
| antisymmetric rank 2 | field tensor (4D): 6 | |
| totally symmetric rank | rank 3 in 4D: 20 | |
| totally antisymmetric rank | rank 3 in 3D: 1 (that is ) |
Elastic stiffness with its pair symmetries has 21; an isotropic solid needs only 2 (the Lamé constants), because the only isotropic tensors are built from (and ): . There is no isotropic vector.
Pseudotensors. If is to keep its values in every frame, including reflected ones, it must pick up a factor under parity. So the cross product of two polar vectors (angular momentum, ) is an axial vector.
Physical tensors. Inertia : a mass 2 kg at has kg m², so -spin alone is not a principal motion (the JAM lesson on rotation and angular momentum shows why). Stress: the traction on a plane of unit normal is and the normal stress is .
4. The metric, upper and lower indices
In general coordinates the line element is . Polar: . Spherical: . A unit sphere: , so the circle has length .
Components with upper indices (contravariant, like ) and lower indices (covariant, like ) transform oppositely; the metric converts one into the other: , . A contraction of an upper with a lower index, , is invariant. In Cartesian coordinates with the two kinds coincide, which is why the distinction never mattered in vector analysis. In relativity , , and is the same in every inertial frame.
Volumes and Laplacians. The volume element is ( in spherical coordinates), and
Worked example. In polar coordinates , which is 18 at . In dimensions ; with , it vanishes: the Coulomb potential is harmonic away from the origin.
Christoffel symbols say how the basis vectors turn from point to point:
Polar: , . Sphere: , . In the geodesic equation , the polar ones reproduce for a free particle. They are not tensors: they vanish in Cartesian coordinates of flat space and not in polar ones. Curvature is measured by the Riemann tensor, which is zero for the plane in any coordinates and non-zero for the sphere.
“Non-zero Christoffel symbols mean the space is curved.” Polar coordinates on a flat sheet already have . Christoffel symbols describe the coordinates, not the space; they can be made to vanish at any point by a good choice of coordinates. Curvature is what survives every change of coordinates: the Riemann tensor, a true tensor, built from derivatives and products of the s.
- Repeated index summed, free indices give the rank. ; ; , , .
- ; invariants: trace, determinant, eigenvalues. Principal axes of a 2D symmetric tensor: .
- Counting: , , , . Elastic: 21 in general, 2 if isotropic. Isotropic tensors: , and their products.
- Quotient law; is a pseudotensor; symmetric times antisymmetric contracts to 0.
- , , in volumes and in . Christoffel symbols are not tensors; curvature lives in the Riemann tensor.
Practise: exam questions on this lesson
From warm-up to top-rank level, with full solutions. More on the tensors practice page.
The Matrix transform tool shows how a 2×2 matrix stretches and rotates the plane. Before this: lesson 1.8, the Dirac delta and Green’s functions. Next: lesson 1.10, probability and statistics. Back to the GATE Physics course home.
Check yourself
Sources
- G. B. Arfken, H. J. Weber and F. E. Harris, Mathematical Methods for Physicists, 7th ed. (2013), chapter 4
- M. L. Boas, Mathematical Methods in the Physical Sciences, 3rd ed. (2006), chapter 10
- K. F. Riley, M. P. Hobson and S. J. Bence, Mathematical Methods for Physics and Engineering, 3rd ed. (2006), chapter 26
- B. F. Schutz, A First Course in General Relativity, 2nd ed. (2009), chapters 3 and 5
- GATE Physics (PH) syllabus, Mathematical Physics section, published by the organising institute each year
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Not affiliated with the IITs, IISc or the GATE organising institute. The general aptitude part of GATE is not covered here. Check the official GATE website for the current pattern. All questions are original.