Module 48: Haloalkanes and haloarenes · Lesson 48.1 · about 36 min
Haloalkanes and haloarenes
Naming and classifying alkyl and aryl halides, the C-X bond, preparation from alcohols, alkenes and diazonium salts, SN1 and SN2 mechanisms with stereochemistry, elimination and Saytzeff's rule, Grignard and Wurtz reactions, why aryl halides resist substitution, and polyhalogen compounds, from basics to JEE Advanced depth.
Chemistry · Class 12 · about 36 minutes. By the end you will be able to name and classify halides, make them, predict SN1 or SN2 and the stereochemistry, choose between substitution and elimination, and explain why aryl halides behave so differently.
1. Classes, names and the C-X bond
Alkyl halides are primary (1°), secondary (2°) or tertiary (3°) by how many carbons are on the C-X carbon. Allylic (X next to C=C) and benzylic (X on a carbon next to a ring) halides are very reactive; vinylic (X on C=C) and aryl (X on a ring) halides are not.
IUPAC names: 2-bromobutane, 1-chloro-2-methylpropane, 1,2-dichloroethane. Common names: methylene chloride CH₂Cl₂, chloroform CHCl₃, iodoform CHI₃, carbon tetrachloride CCl₄, benzyl chloride C₆H₅CH₂Cl. Dihalides on one carbon are gem; on neighbouring carbons vic.
Trends. Bond length C-F < C-Cl < C-Br < C-I; bond strength the reverse, so reactivity is R-I > R-Br > R-Cl > R-F. Boiling point rises with halogen size and with chain length; among isomers, more branching lowers it. Density: bromides and iodides are denser than water.
2. Making halides
- From alcohols: HCl with anhydrous ZnCl₂ (Groves; Lucas reagent for 3° fastest), PCl₅, PCl₃, or SOCl₂ (best: SO₂ and HCl escape as gases, leaving pure product). HBr, or red P with Br₂ or I₂.
- From alkenes: HX adds by Markovnikov’s rule (H to the carbon with more H). HBr with peroxide adds the other way (anti-Markovnikov, the Kharasch effect, free radical, only for HBr).
- Halogen exchange: Finkelstein (R-Cl + NaI in dry acetone → R-I; NaCl precipitates and drives it) and Swarts (R-Br + AgF or Hg₂F₂ → R-F).
- Aryl halides: electrophilic substitution with Cl₂/FeCl₃; or from diazonium salts by Sandmeyer (CuCl/HCl or CuBr/HBr), Gattermann (Cu powder with HX) or KI (aryl iodide, no catalyst needed). See Amines and diazonium salts.
3. Nucleophilic substitution: SN2 and SN1
| SN2 | SN1 | |
|---|---|---|
| Steps | one, concerted | two: slow ionisation, fast attack |
| Rate law | k[RX][Nu⁻], second order | k[RX], first order |
| Best substrate | CH₃X > 1° > 2° ≫ 3° | 3° > 2° ≫ 1° > CH₃X (also allylic, benzylic) |
| Stereochemistry | complete inversion (Walden) | mostly racemisation |
| Favoured by | strong nucleophile, polar aprotic solvent (acetone, DMSO, DMF) | weak nucleophile, polar protic solvent (water, alcohols) |
| Rearrangement | never | possible (carbocation shifts H or CH₃ to become more stable) |
- Nu⁻
- nucleophile, an electron-pair donor that attacks carbon (OH⁻, CN⁻, I⁻, NH₃, H₂O)
- RX
- alkyl halide; X⁻ is the leaving group (I⁻ best, F⁻ worst)
- k
- rate constant; SN2 rate = k[RX][Nu⁻], SN1 rate = k[RX]
- Inversion, racemisation
- the product's 3D arrangement is the mirror of the start; or a 50 : 50 mix of both mirror forms
- Physical meaning
- SN2 is a crowded doorway: bulky groups block it. SN1 waits for the halide to leave on its own: only a stable cation lets that happen.
Ambident nucleophiles give two products: KCN gives mostly alkyl cyanides (R-CN, attack through C), AgCN mostly isocyanides (R-NC, the Ag-C bond is covalent so N attacks). KNO₂ gives alkyl nitrites (R-ONO), AgNO₂ nitroalkanes (R-NO₂).
“SN1 and SN2 differ only in speed.” They differ in mechanism, rate law and stereochemistry. Doubling [OH⁻] doubles an SN2 rate but leaves an SN1 rate unchanged, and SN2 inverts a chiral centre while SN1 scrambles it. Exams test exactly these differences.
4. Elimination and other reactions
With alcoholic KOH (strong base, heat), a halide loses HX to give an alkene (β-elimination, E2 for most cases). Saytzeff (Zaitsev) rule: the more substituted alkene is the major product (2-bromobutane gives mainly but-2-ene). Aqueous KOH favours substitution (alcohol); alcoholic KOH and higher temperature favour elimination; 3° halides eliminate most easily.
- Wurtz: 2R-X + 2Na (dry ether) → R-R. With two different halides you get three alkanes (R-R, R-R′, R′-R′), so it is useful only for symmetric products. Wurtz-Fittig: aryl + alkyl halide + Na gives an alkylbenzene; Fittig: two aryl halides give biphenyl.
- Grignard reagent: R-X + Mg (dry ether) → R-MgX. The carbon becomes strongly nucleophilic and basic. It reacts with any acidic H (water, alcohols, amines, terminal alkynes) to give the alkane R-H, so everything must be dry. With carbonyl compounds it gives alcohols (see Aldehydes, ketones and carboxylic acids).
- Reduction: R-X with Zn/HCl or H₂/Pd gives R-H.
5. Haloarenes
Aryl halides resist nucleophilic substitution because (i) resonance gives C-X partial double-bond character, (ii) the carbon is sp², making the bond shorter and stronger, (iii) the phenyl cation is unstable, and (iv) the electron-rich ring repels nucleophiles. Chlorobenzene is turned into phenol only at 623 K and 300 atm with NaOH (Dow process).
Electron-withdrawing groups at ortho or para (NO₂) make substitution easy: they hold the negative charge of the intermediate. Reactivity rises with more nitro groups: chlorobenzene < 4-nitrochlorobenzene < 2,4-dinitrochlorobenzene < 2,4,6-trinitrochlorobenzene (hydrolysed by warm water). A meta nitro group helps far less.
In electrophilic substitution, halogens are deactivating (inductive pull) yet ortho-para directing (lone pairs donated by resonance). Chlorobenzene gives mainly 4-chloronitrobenzene on nitration.
6. Polyhalogen compounds
- CH₂Cl₂: solvent, paint stripper; harms the nervous system in high doses.
- CHCl₃: once an anaesthetic; in air and light it forms poisonous phosgene COCl₂, so it is stored in dark bottles, full, with a little ethanol added.
- CHI₃: yellow antiseptic (releases iodine).
- CCl₄: once used in fire extinguishers and dry cleaning; toxic to the liver, ozone-depleting.
- Freons (CFCs): inert refrigerants and aerosol propellants; in the stratosphere UV light frees Cl atoms that destroy ozone. Phased out under the Montreal Protocol.
- DDT: the first chlorinated insecticide; it builds up in food chains because it is fat-soluble and breaks down slowly.
- Reactivity of R-X: I > Br > Cl > F (weaker bond, better leaving group).
- SOCl₂ is the cleanest way to make R-Cl from an alcohol; Finkelstein (NaI/acetone) and Swarts (AgF) exchange halogens.
- SN2: one step, second order, inversion, CH₃ > 1° > 2° > 3°, polar aprotic solvent.
- SN1: two steps, first order, racemisation, 3° > 2° > 1°, polar protic solvent, rearrangements.
- KCN gives nitriles, AgCN isocyanides; aqueous KOH substitutes, alcoholic KOH eliminates (Saytzeff).
- Grignard reagents are destroyed by any O-H or N-H; keep everything dry.
- Aryl halides: partial double bond, resist SN; o/p nitro groups activate; halogens are o/p directing but deactivating.
Check yourself
Sources
- NEET (UG), JEE Main and JEE Advanced 2026 syllabi: Haloalkanes and haloarenes
- IUPAC Nomenclature of Organic Chemistry, Recommendations 2013 https://iupac.org/what-we-do/books/bluebook/
- Montreal Protocol on ozone-depleting substances (CFCs), UN Environment Programme https://ozone.unep.org
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.