Module 13: Thermodynamics · Lesson 13.1 · about 36 min
Thermodynamics
The zeroth and first laws, internal energy and work on P-V diagrams, isothermal, adiabatic, isobaric, isochoric and polytropic processes, molar specific heats, cyclic processes, heat engines, the Carnot engine, refrigerators and heat pumps, the second law and entropy.
Physics · Class 11 · about 36 minutes. By the end you will be able to apply the first law to any process, find work from a P-V graph, use the formulas for the four standard processes, analyse cycles, and work out the efficiency of engines and the performance of refrigerators.
1. The zeroth and first laws
Zeroth law: if A and B are each in thermal equilibrium with C, they are in equilibrium with each other. That is what lets a thermometer work, and it defines temperature.
First law:
- Q
- heat given to the gas (positive when heat flows in)
- ΔU
- change in internal energy; for an ideal gas ΔU = nC_vΔT in every process
- W
- work done by the gas, ∫P dV (positive when it expands)
- γ
- C_p/C_v: 5/3 for monatomic, 7/5 for diatomic gases
- Physical meaning
- Heat in either stays in the gas as faster molecules or leaves as work pushing a piston. Nothing is lost.
Q and W depend on the path; U is a state function that depends only on the state (P, V, T). That is why holds even when the volume is not constant.
2. Work on a P-V diagram
is the area under the curve on a P-V graph. Expansion gives positive work, compression negative. Around a cycle, the net work is the area enclosed: clockwise means the gas does net work (an engine), anticlockwise means work is done on it (a refrigerator).
Pick a process below and watch the work area and the energy split.
3. The four standard processes
| Process | Constant | Work by gas W | Heat Q | ΔU |
|---|---|---|---|---|
| Isochoric | V | 0 | = Q | |
| Isobaric | P | |||
| Isothermal | T (PV = constant) | = W | 0 | |
| Adiabatic | Q = 0 ( = constant) | 0 | = −W |
- Adiabatic forms: , and are constant.
- On a P-V graph, an adiabatic curve is steeper than an isothermal one through the same point, by a factor γ (slope −γP/V against −P/V).
- Polytropic process = constant: with sign care, and molar heat . x = 0 is isobaric, 1 isothermal, γ adiabatic, ∞ isochoric.
- Free expansion into a vacuum: no work, no heat, so ΔU = 0 and T stays the same for an ideal gas.
“Heat and temperature are the same; if you add heat, the temperature must rise.” In an isothermal expansion, heat flows in and the temperature stays the same: all of it leaves as work. In an adiabatic compression, no heat flows in and the temperature still rises.
4. Molar specific heats of gases
At constant volume, all heat goes into U: . At constant pressure, part goes into work too, so . Mayer’s relation: .
| Gas | Degrees of freedom f | C_v | C_p | γ |
|---|---|---|---|---|
| Monatomic (He, Ar) | 3 | 5/3 ≈ 1.67 | ||
| Diatomic (O₂, N₂), room temperature | 5 | 7/5 = 1.4 | ||
| Rigid polyatomic | 6 | 3R | 4R | 4/3 |
In general and . For a mixture, add the n C_v values and divide by the total moles.
5. Heat engines and refrigerators
A heat engine takes heat Q_h from a hot source, does work W, and rejects Q_c to a cold sink: , efficiency .
A refrigerator runs backwards: work W moves heat Q_c out of the cold space and dumps Q_h = Q_c + W outside. Its coefficient of performance . A heat pump warms a house: its performance is .
The Carnot engine (two isothermals and two adiabatics, all reversible) is the best possible between two temperatures:
with temperatures in kelvin. Its efficiency depends only on the two temperatures, not on the working gas.
6. The second law and entropy
- Kelvin-Planck: no engine working in a cycle can turn all the heat it takes in into work. So η < 1 always.
- Clausius: heat cannot flow by itself from a colder body to a hotter one; a refrigerator needs work.
Entropy S measures how spread out energy is. For a reversible change, . Melting m kg of ice at 0 °C: . In any real (irreversible) process in an isolated system, total entropy rises; in a reversible one, it stays the same. Heat flowing from hot to cold always increases total entropy.
“A perfect engine just needs a perfect, friction-free design.” Even a perfect, reversible engine must throw some heat into a cold sink. Between 600 K and 300 K, no engine of any design can turn more than half the heat into work.
Worked example (level 4, cycle). One mole of a monatomic gas goes A → B at constant volume (P doubles from P₀), B → C at constant pressure (V doubles from V₀), and back to A along a straight line. Net work = area of the triangle = ½ × V₀ × P₀ = ½P₀V₀. Heat in: A → B, ; B → C, . So η = 0.5/6.5 ≈ 7.7%, far below the Carnot value of 1 − T_A/T_C = 1 − 1/4 = 75%.
- Q = ΔU + W; ΔU = nC_vΔT for any process of an ideal gas; U is a state function.
- Work = area under P-V; net work of a cycle = enclosed area (clockwise: engine).
- Isothermal W = nRT ln(V₂/V₁); adiabatic PV^γ constant, W = nRΔT/(γ − 1) (with T₁ − T₂).
- Adiabatic curves are γ times steeper than isothermals on P-V.
- C_p − C_v = R; C_v = (f/2)R; γ = 1 + 2/f: 5/3 monatomic, 7/5 diatomic.
- Engine η = 1 − Q_c/Q_h; Carnot η = 1 − T_c/T_h; refrigerator β = T_c/(T_h − T_c).
- Second law: no engine is 100% efficient; entropy of an isolated system never falls; dS = dQ/T.
Check yourself
Sources
- National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Thermodynamics
- Molar gas constant R = 8.314 462 618 J mol⁻¹ K⁻¹ (exact in the 2019 SI), CODATA 2018 via NIST https://physics.nist.gov/cgi-bin/cuu/Value?r
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.