All lessons

Module 5: Laws of motion and friction · Lesson 5.2 · about 30 min

Laws of motion and friction: question types and traps

Every way entrance exams ask about forces: free-body diagrams, pulleys and constraints, lifts, pseudo forces, static and kinetic friction, blocks on blocks, impulse and recoil, banked roads, conical pendulums and the vertical circle, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 30 minutes. Read the lesson Laws of motion and friction first. Here you meet every question type, with a worked example and the trap, then practise.

Each force question is solved in three moves: choose the body (or system), draw only the real forces on it, and write F = ma along well-chosen axes. Friction questions add one check first: does it slip or not?

The ten question types

1. Newton's laws and inertial frames. Statement and assertion questions. Trap: thinking action-reaction pairs cancel, or that a moving body needs a force to keep moving.
2. Impulse and momentum. Impulse = area under F-t = change in momentum (with direction). Trap: a rebound doubles the change.
3. Recoil and momentum conservation. Total momentum before = after. Trap: the bullet's speed given relative to the gun.
4. Pulleys and constraints. One equation per body plus the string-length rule. Trap: a movable pulley halves the block's acceleration and doubles the tension it carries.
5. Contact forces and springs. System first for a, then one block for the contact force. Trap: a spring force cannot change at the instant a string is cut; a string force can.
6. Lifts and pseudo forces. N = m(g + a); pendulum in a car tan θ = a/g. Trap: slowing down while going up means a points down.
7. Does it slip? Find the friction needed and compare with μs N. If needed is smaller, friction equals needed. Trap: writing f = μN for a body at rest.
8. Blocks on blocks and on slopes. Assume they move together, find the friction needed on the top block, check against μN. Trap: the top block's greatest acceleration is μg, set by friction alone.
9. Circular motion on roads. Flat: v = √(μrg). Banked: tan θ = v²/rg. Trap: using N = mg on a banked road; it is larger.
10. Vertical circle. Top: T + mg = mv²/r. Energy links top and bottom. Trap: a rod needs only zero speed at the top, a string needs √(gr).

Worked examples

Example 1 (level 3, movable pulley). Block A (4 kg) on a smooth table is tied by a string that passes over a fixed pulley at the edge, then down round a light movable pulley carrying block B (6 kg), and up to a fixed hook. Find B’s acceleration. (g = 10 m/s²)

Solution. If A moves x, B falls x/2, so aB=aA/2. A: T=4aA. B: 60−2T=6aB. Put aA=2aB: 60−16aB=6aB, so a_B = 30/11 ≈ 2.73 m/s² (T ≈ 21.8 N). Trap: taking equal accelerations.

Example 2 (level 4, block on block). A 2 kg block sits on a 4 kg block on a smooth floor; μ between them is 0.3. A force of 24 N pulls the lower block. Find both accelerations. (g = 10 m/s²)

Solution. Together: a = 24/6 = 4 m/s², which would need friction 2 × 4 = 8 N on the top block. The limit is 0.3 × 20 = 6 N, so they slip. Top: a = 6/2 = 3 m/s². Bottom: (24 − 6)/4 = 4.5 m/s².

Example 3 (level 4, least force). What is the least force needed to drag a 10 kg box on a floor with μ = 0.75, and at what angle? (g = 10 m/s²)

Solution. Least force =μmg/1+μ2=75/1.25 = 60 N, pulling at tan⁡α=0.75, so α ≈ 37° above the horizontal. Pulling horizontally needs 75 N.

Example 4 (level 5, vertical circle). A 0.5 kg stone on a 1 m string just completes a vertical circle. Find the tension when the string is horizontal. (g = 10 m/s²)

Solution. At the bottom v2=5gr=50. At the side it has risen r: v2=50−2×10×1=30. Horizontal string: only tension points to the centre, T=mv2/r=0.5×30 = 15 N (= 3mg).

“On an incline, N = mg.” Only on level ground. On a slope N = mg cos θ, pulling up at an angle lowers it, pushing down raises it, and on a banked road N = mg/cos θ (larger). Always find N from the perpendicular direction first.

System or one body
use the whole system to find a common acceleration; use one body to find a force between bodies
Slip test
friction needed ≤ μs N means no slipping and f = needed; otherwise f = μk N
Physical meaning
Internal forces (tension inside the system, friction between blocks) cancel only when you treat the whole system as one body.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: laws and frames, impulse, recoil, pulleys, contact and springs, lifts and pseudo forces, slip test, blocks on blocks, roads, vertical circle.
  • Always check whether a body slips before writing f = μN.
  • Constraints: a movable pulley halves the acceleration.
  • Top block’s greatest acceleration is μg; above that they slip.
  • Vertical circle on a string: √(gr) at top, √(5gr) at bottom, tension 3mg at the side.

Check yourself

1A 2 kg block on a table (μs = 0.5) is pushed sideways with 6 N. The friction on it is: (g = 10 m/s²)
2A ball of 0.2 kg hits a wall at 10 m/s and rebounds at 10 m/s. The impulse on it has size:
3A bob hangs from the roof of a car accelerating at g/√3. The string makes an angle with the vertical of:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Laws of motion; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.