All lessons

Module 39: Redox reactions · Lesson 39.1 · about 34 min

Redox reactions

Oxidation and reduction as electron transfer, oxidation number rules with the tricky cases (peroxides, superoxides, average values, structure-based values), types of redox reaction including disproportionation, balancing by the ion-electron and oxidation number methods, n-factor and equivalent weight, redox titrations and iodometry, and the electrochemical series.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 34 minutes. By the end you will be able to assign any oxidation number, spot what is oxidised and reduced, balance any redox equation in acid or base, find n-factors and equivalent weights, solve titration problems and use the electrochemical series to predict reactions.

Oxidation is loss of electrons; reduction is gain. They always happen together: electrons lost by one substance are gained by another. Oxidation numbers are a bookkeeping system that lets us follow electrons even when they are only shared.

1. What oxidation and reduction mean

Older ideas: oxidation is adding oxygen or removing hydrogen; reduction is the reverse. The modern, more general idea: oxidation = loss of electrons, reduction = gain of electrons. In Zn + Cu²⁺ → Zn²⁺ + Cu, zinc loses 2 electrons (oxidised) and copper ions gain them (reduced). The substance that is reduced is the oxidising agent (Cu²⁺ here); the one oxidised is the reducing agent (Zn).

2. Oxidation numbers

The oxidation number (ON) is the charge an atom would carry if every bond were fully ionic, with shared electrons given to the more electronegative atom. Rules, in order of priority:

  1. An element in its free state: 0 (Na, O₂, P₄, S₈).
  2. A simple ion: its charge (Na⁺ +1, Cl⁻ −1).
  3. Fluorine always −1. Group 1 metals +1, group 2 metals +2 in compounds.
  4. Hydrogen +1, except −1 in metal hydrides (NaH, CaH₂).
  5. Oxygen −2, except −1 in peroxides (H₂O₂, Na₂O₂, BaO₂), −1/2 in superoxides (KO₂) and +2 in OF₂.
  6. The ONs in a species add up to its charge.

Average and structure-based values. Formula counting gives an average. In Fe₃O₄, Fe is +8/3 on average (really one Fe²⁺ and two Fe³⁺). In S₄O₆²⁻ the average S is +2.5; in the structure the two end S atoms are +5 and the two bridging S atoms 0. In CrO₅, counting all O as −2 gives an impossible +10; the structure has two peroxide groups (four O at −1) and one oxide O (−2), so Cr is +6. Whenever counting gives more than the group number, look for O-O bonds.

ON
oxidation number: the charge an atom would have if all its bonds were ionic
n-factor
electrons gained or lost per formula unit in the reaction (for acids and bases: H⁺ or OH⁻ given per formula unit)
E (equivalent weight)
molar mass ÷ n-factor
N (normality)
equivalents per litre = molarity × n-factor
E°
standard reduction potential of a half-cell, in volts, against the hydrogen electrode (0 V)
Physical meaning
An equivalent is the amount that gives or takes one mole of electrons. That is why equivalents of oxidant always equal equivalents of reductant at the end of a titration.

3. Types of redox reaction

  • Combination: C + O₂ → CO₂. Decomposition: 2KClO₃ → 2KCl + 3O₂ (an intramolecular redox: Cl is reduced, O oxidised in the same compound).
  • Displacement: a more reactive metal pushes a less reactive one out of solution (Zn + CuSO₄), or a halogen higher up pushes out a lower one (Cl₂ + 2KBr → 2KCl + Br₂).
  • Disproportionation: one element in one oxidation state goes both up and down. Examples: 2H₂O₂ → 2H₂O + O₂; Cl₂ + 2OH⁻ → Cl⁻ + ClO⁻ + H₂O; 3HNO₂ → HNO₃ + 2NO + H₂O. An element at its highest or lowest possible state cannot disproportionate (F₂ cannot, since F has no positive states; ClO₄⁻ cannot).
  • Comproportionation: the reverse, two states meeting in the middle: IO₃⁻ + 5I⁻ + 6H⁺ → 3I₂ + 3H₂O.

4. Balancing redox equations

Ion-electron method, example in acid. MnO₄⁻ + Fe²⁺ → Mn²⁺ + Fe³⁺. Split into half-reactions: MnO₄⁻ → Mn²⁺ and Fe²⁺ → Fe³⁺.
Balance atoms other than O and H, then O with H₂O, then H with H⁺. MnO₄⁻ + 8H⁺ → Mn²⁺ + 4H₂O.
Balance charge with electrons. Left +7, right +2: add 5e⁻ on the left. MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. And Fe²⁺ → Fe³⁺ + e⁻.
Make electrons equal and add. Multiply the iron half by 5: MnO₄⁻ + 5Fe²⁺ + 8H⁺ → Mn²⁺ + 5Fe³⁺ + 4H₂O. Check: charge +17 on both sides.
In basic solution. Balance as if acidic, then add as many OH⁻ to both sides as there are H⁺; each H⁺ + OH⁻ becomes H₂O; cancel water.

The oxidation number method does the same with ON changes: the total increase must equal the total decrease.

5. n-factor, equivalents and normality

The n-factor of an oxidant or reductant is the total change in ON per formula unit. K₂Cr₂O₇ → 2Cr³⁺: 2 × 3 = 6. C₂O₄²⁻ → 2CO₂: 2 × 1 = 2. FeC₂O₄ → Fe³⁺ + 2CO₂: 1 + 2 = 3. The n-factor depends on the reaction, not just the substance: KMnO₄ is 5 in acid, 3 in neutral and 1 in strongly basic solution. For a disproportionation, use n = (nup × ndown)/(nup + ndown) per molecule.

The law of equivalence: in any reaction, equivalents of oxidant = equivalents of reductant, where equivalents = moles × n-factor = N × V(L).

6. Redox titrations

  • Permanganometry: KMnO₄ in dilute H₂SO₄ is its own indicator (the first permanent pink colour marks the end point). HCl is avoided because MnO₄⁻ oxidises Cl⁻ to Cl₂. Oxalic acid needs warming (about 60 °C) because the reaction is slow at first.
  • Dichrometry: K₂Cr₂O₇ is a primary standard (pure and stable); an indicator such as diphenylamine is needed. It can be used in HCl.
  • Iodometry: an oxidant frees I₂ from excess KI; the I₂ is titrated with thiosulfate (I₂ + 2S₂O₃²⁻ → 2I⁻ + S₄O₆²⁻), with starch added near the end (blue to colourless). In iodimetry, a standard I₂ solution is titrated directly against a reductant.

“In a titration the moles of oxidant equal the moles of reductant.” Only if their n-factors are equal. It is equivalents (moles × n-factor) that match. 1 mol of MnO₄⁻ in acid takes 5 electrons, so it reacts with 5 mol of Fe²⁺.

7. Electrode potentials and the electrochemical series

A metal dipped in a solution of its ions forms a half-cell with a tendency to gain electrons, measured as the standard reduction potential E° against the standard hydrogen electrode (defined as 0 V) at 25 °C, 1 M and 1 bar. Listing couples by E° gives the electrochemical series. The more positive E°, the stronger the oxidised form as an oxidising agent (F₂ is the strongest); the more negative, the stronger the reduced form as a reducing agent (Li is the strongest in water).

In a cell, the couple with the higher E° is reduced (cathode) and the other is oxidised (anode): E°cell = E°cathode − E°anode. A positive E°cell means the reaction goes on its own. Metals below hydrogen (negative E°) displace H₂ from dilute acids; copper and silver do not.

The electrochemical series as a ladder. Choose two half-cells: electrons flow from the lower couple (oxidised, anode) to the higher one (reduced, cathode), and the gap between them is E°cell.

“When a half-reaction is multiplied by 2, its E° doubles.” E° is an intensive property, like temperature: it does not depend on how much reacts. Balance the electrons, but never multiply the potentials.

  • Oxidation = loss of electrons (ON up); reduction = gain (ON down); the oxidising agent is itself reduced.
  • O is −1 in peroxides, −1/2 in superoxides, +2 in OF₂; H is −1 in metal hydrides.
  • Impossible ON from counting (CrO₅): look for peroxide links; Cr there is +6.
  • Disproportionation needs an intermediate oxidation state.
  • Ion-electron method: atoms, O with H₂O, H with H⁺, charge with e⁻; in base add OH⁻ to both sides.
  • n-factor = electrons per formula unit; KMnO₄ 5 (acid), 3 (neutral), 1 (strong base); K₂Cr₂O₇ 6.
  • Equivalents of oxidant = equivalents of reductant (n × M × V).
  • E°cell = E°cathode − E°anode; never multiply E° when balancing.

Check yourself

1The oxidation number of oxygen in KO₂ is:
2In 2H₂O₂ → 2H₂O + O₂, hydrogen peroxide is:
3The n-factor of KMnO₄ in acidic solution (giving Mn²⁺) is:

Sources

  • IUPAC Gold Book: oxidation state, oxidation, reduction https://goldbook.iupac.org
  • Standard electrode potentials: CRC Handbook of Chemistry and Physics, Electrochemical series
  • NEET (UG) and JEE Main / JEE Advanced 2026 syllabi: Redox reactions

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.