All lessons

Module 38: Ionic equilibrium: acids, bases, pH and buffers · Lesson 38.1 · about 38 min

Ionic equilibrium: acids, bases, pH and buffers

Arrhenius, Brønsted-Lowry and Lewis acids, the ionic product of water and pH, strong and weak acids and bases, Ostwald's dilution law, polyprotic acids, the common ion effect, salt hydrolysis, buffers and the Henderson equation, titration curves and indicators, and solubility product with precipitation.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 38 minutes. By the end you will be able to find the pH of any acid, base, salt or buffer solution, choose an indicator for a titration, and decide from Ksp whether a precipitate forms.

Acids give H⁺ and bases take it. Water itself always keeps [H⁺][OH⁻] = 10⁻¹⁴ at 25 °C, so knowing one tells you the other. Weak acids, salts, buffers and sparingly soluble solids are all equilibria, so the same K-expression method from chemical equilibrium solves every one of them.

1. Three ideas of acids and bases

  • Arrhenius: an acid gives H⁺ in water, a base gives OH⁻. Works only in water.
  • Brønsted-Lowry: an acid donates a proton, a base accepts one. Every acid has a conjugate base (HCl and Cl⁻; NH₄⁺ and NH₃). The stronger the acid, the weaker its conjugate base. Amphiprotic species can do both: H₂O, HCO₃⁻, HSO₄⁻.
  • Lewis: an acid accepts an electron pair, a base donates one. BF₃, AlCl₃ and metal ions like Fe³⁺ are Lewis acids; NH₃ and OH⁻ are Lewis bases.

2. Water, pH and strong acids

Water ionises slightly: H₂O ⇌ H⁺ + OH⁻, with Kw = [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ at 25 °C. pH = −log[H⁺], pOH = −log[OH⁻], and pH + pOH = 14 at 25 °C. Kw rises with temperature (the ionisation is endothermic), so pure water at 60 °C has a pH below 7 yet is still neutral, because [H⁺] = [OH⁻].

A strong acid ionises completely: [H⁺] = C × (number of H⁺ per molecule). 0.01 M HCl has pH 2; 0.005 M H₂SO₄ also pH 2. For very dilute acids (below about 10⁻⁶ M), add water’s own H⁺: solve x(x − C) = Kw.

3. Weak acids and bases

A weak acid ionises only partly: HA ⇌ H⁺ + A⁻ with Ka = [H⁺][A⁻]/[HA]. If C is the concentration and α the fraction ionised, Ka = Cα²/(1 − α) ≈ Cα² when α is small. So:

α=KaC[H+]=KaCpH=12(pKa−log⁡C)

This is Ostwald’s dilution law: dilute a weak acid and it ionises more (α grows), though [H⁺] still falls. Weak bases work the same way with Kb and [OH⁻]. For a conjugate pair, Ka × Kb = Kw (pKa + pKb = 14).

Ka, Kb
ionisation constants of a weak acid and a weak base; pK = −log K, so a smaller pKa means a stronger acid
C, α
concentration (mol/L) and degree of ionisation
Kw
ionic product of water, 1.0 × 10⁻¹⁴ at 25 °C
Ksp, s
solubility product and molar solubility of a sparingly soluble salt
Physical meaning
pH is a count of powers of ten: each step of 1 is a tenfold change in [H⁺]. Lemon juice (pH 2) has 100 000 times more H⁺ than pure water.

Polyprotic acids (H₂S, H₂CO₃, H₃PO₄) lose protons one at a time, with Ka1 much bigger than Ka2. The pH comes almost entirely from the first step, and for H₂A the concentration of A²⁻ is about Ka2.

4. The common ion effect

Adding an ion that is already part of an equilibrium pushes it back (Le Chatelier). Sodium acetate added to acetic acid lowers its ionisation: [H⁺] = Ka × [acid]/[salt]. The same effect lowers the solubility of salts (section 8) and is used in group analysis: H₂S in acid gives so little S²⁻ that only the least soluble sulfides precipitate.

5. Salt hydrolysis

The ions of a salt can react with water. The ion from a strong acid or strong base does nothing; the ion from a weak partner does.

Salt from Example Solution pH at 25 °C
Strong acid + strong base NaCl neutral 7
Weak acid + strong base CH₃COONa basic 7 + ½pKa + ½log C
Strong acid + weak base NH₄Cl acidic 7 − ½pKb − ½log C
Weak acid + weak base CH₃COONH₄ depends on Ka and Kb 7 + ½pKa − ½pKb (no C)

6. Buffers

A buffer resists change in pH when a little acid or base is added. It is a weak acid with its salt (acetic acid + sodium acetate) or a weak base with its salt (NH₃ + NH₄Cl). Added H⁺ is eaten by the conjugate base; added OH⁻ by the weak acid. The Henderson equation:

pH=pKa+log⁡[salt][acid]pOH=pKb+log⁡[salt][base]

A buffer works best (highest buffer capacity) when salt and acid are equal (pH = pKa), and usefully within pKa ± 1. Blood is buffered near pH 7.4 by H₂CO₃ and HCO₃⁻.

7. Titration curves and indicators

During a titration the pH changes slowly at first, then jumps near the equivalence point. For a strong acid with a strong base the jump runs from about pH 4 to 10 and the equivalence pH is 7. For a weak acid with a strong base, the curve starts higher, passes pH = pKa at half-neutralisation, and the equivalence pH is above 7 (the salt hydrolyses). An indicator is itself a weak acid whose two forms have different colours; it changes over about pKIn ± 1. Pick one whose range sits inside the jump: phenolphthalein (8.3 to 10) for weak acid with strong base, methyl orange (3.1 to 4.4) for strong acid with weak base. A weak acid with a weak base has no sharp jump.

25 mL of 0.1 M acid titrated with 0.1 M NaOH, worked out exactly at every point. Switch between a strong and a weak acid and change pKa: watch the start, the half-neutralisation point (pH = pKa), the equivalence pH and which indicator band lies on the jump.

8. Solubility product and precipitation

A sparingly soluble salt in contact with its saturated solution sets up AₓBᵧ(s) ⇌ xA^(y+) + yB^(x−), with Ksp = [A]ˣ[B]ʸ. If s mol/L dissolves: AgCl Ksp = s², CaF₂ 4s³, Ag₂CrO₄ 4s³, Al(OH)₃ 27s⁴, Ca₃(PO₄)₂ 108s⁵.

  • Precipitation happens when the ionic product Qsp (using current concentrations, after mixing) exceeds Ksp.
  • Common ion: in 0.1 M NaCl, the solubility of AgCl falls to Ksp/0.1.
  • Selective precipitation: when a reagent is added slowly to a mixture, the salt needing the smaller concentration of reagent to reach its Ksp comes out first.
  • Salts of weak acids (CaCO₃, metal hydroxides, sulfides) dissolve better in acid, because the acid removes the anion.

“A smaller Ksp always means a less soluble salt.” Only for salts of the same type. AgCl (Ksp 1.8 × 10⁻¹⁰, s = 1.3 × 10⁻⁵ M) is less soluble than Ag₂CrO₄ (Ksp 1.1 × 10⁻¹², s = 6.5 × 10⁻⁵ M), though its Ksp is larger. Convert to s before comparing.

“Diluting a weak acid makes it weaker.” Dilution lowers [H⁺] (pH rises), but the acid ionises a larger fraction (α = √(Ka/C) grows). Ka, the true measure of strength, is unchanged.

  • Brønsted: proton donor and acceptor; strong acid, weak conjugate base. Lewis: electron pair acceptor.
  • Kw = 10⁻¹⁴ at 25 °C; pH + pOH = 14; very dilute acid: include water’s H⁺.
  • Weak acid: [H⁺] = √(KaC), α = √(Ka/C); KaKb = Kw.
  • Salt of weak acid + strong base is basic; weak acid + weak base pH does not depend on C.
  • Buffer: pH = pKa + log(salt/acid); best at pH = pKa.
  • Indicator range inside the jump: phenolphthalein for weak acid, methyl orange for weak base.
  • Ksp = s², 4s³, 27s⁴, 108s⁵; precipitate when Qsp > Ksp; common ion lowers solubility.

Check yourself

1The pH of 10⁻⁸ M HCl at 25 °C is:
2An aqueous solution of sodium acetate is:
3The solubility of AgCl in 0.1 M NaCl compared with pure water is:

Sources

  • IUPAC Gold Book: pH, ionic product of water, solubility product https://goldbook.iupac.org
  • Acid dissociation constants and solubility products: CRC Handbook of Chemistry and Physics, Dissociation constants of organic acids and bases; Solubility product constants
  • NEET (UG) and JEE Main / JEE Advanced 2026 syllabi: Equilibrium (ionic equilibrium part)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.