All lessons

Module 25: Ray optics and optical instruments · Lesson 25.1 · about 36 min

Ray optics and optical instruments

Reflection and spherical mirrors, refraction, apparent depth and lateral shift, total internal reflection and optical fibres, refraction at a curved surface, thin lenses and the lensmaker's formula, lens combinations and silvered lenses, prisms and dispersion, the eye and its defects, microscopes and telescopes.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 36 minutes. By the end you will be able to locate images for mirrors, lenses and refracting surfaces with one sign convention, handle prisms and total internal reflection, and work out the magnifying power of microscopes and telescopes.

Light travels in straight lines until it meets a surface; then it either bounces (reflection) or bends (refraction) by rules set by the angle and the refractive index. Every mirror, lens and instrument is these two rules applied again and again, with one sign convention to keep track of directions.

1. Sign convention and mirrors

Use the Cartesian convention: measure all distances from the pole or optical centre; distances in the direction the light travels are positive, against it negative; heights up are positive. An object in front is at negative u.

Mirror: 1v+1u=1f,m=−vu,f=R2

A concave mirror has negative f, a convex mirror positive f. A plane mirror forms a virtual image as far behind as the object is in front; turning the mirror by θ turns the reflected ray by 2θ; two mirrors at angle θ give 360°θ−1 images (when 360/θ is even).

“A concave mirror always forms a real image.” Only if the object is beyond the focus. Inside the focus, it forms a virtual, upright, magnified image: that is how a shaving or make-up mirror works.

2. Refraction

Snell’s law: μ1sin⁡i=μ2sin⁡r, where μ=c/v. Light bends towards the normal on entering a denser medium. Frequency stays the same; speed and wavelength drop by μ.

  • Apparent depth (looking straight down): real depth/μ, so an object in water seems raised by d(1−1μ).
  • Glass slab: the ray comes out parallel to its original direction, shifted sideways by tsin⁡(i−r)cos⁡r. An object seen through a slab shifts by t(1−1/μ) towards the slab.

Total internal reflection. Going from denser to rarer, the refracted ray grazes the surface at the critical angle C, sin⁡C=μrarerμdenser. Beyond C, all the light reflects. Glass-air: C ≈ 42°; water-air: C ≈ 49°; diamond: C ≈ 24°, which is why diamonds sparkle. Optical fibres guide light by repeated total internal reflection. A lamp at depth h in water lights a circle of radius hμ2−1 at the surface. Mirages and the shimmer over hot roads are total internal reflection in air layers.

3. Refraction at a curved surface and thin lenses

At one spherical surface of radius R between media μ₁ (object side) and μ₂:

μ2v−μ1u=μ2−μ1R

Two such surfaces make a thin lens:

1v−1u=1f,1f=(μ−1)(1R1−1R2),m=vu,P=1f(m)
u, v
object and image distances with signs (object in front: u negative)
f
focal length: positive for convex (converging) lenses and convex mirrors, negative for concave lenses and concave mirrors
R₁, R₂
radii of the first and second surfaces met by the light, with signs
P
power in dioptres (D) when f is in metres
Physical meaning
A lens bends light because its thickness changes across it; the more the surfaces curve and the bigger the index difference, the stronger the bend.

Try every case here: lens or mirror, object far or near.

Two rays from the tip of the object find the image: one parallel to the axis, one through the centre of the lens (or to the pole of the mirror). Dashed lines are rays traced backwards to a virtual image.

In a liquid, replace (μ − 1) by (μlensμliquid−1). If the liquid is denser than the lens, the lens changes from converging to diverging.

Combinations. Thin lenses in contact: P=P1+P2. Separated by d: 1F=1f1+1f2−df1f2. A lens silvered on one face acts as a mirror with P=2Plens+Pmirror. Displacement method: for a fixed object-screen distance D > 4f, two lens positions a distance x apart give sharp images, with f=D2−x24D.

4. Prisms and dispersion

For a prism of angle A, deviation δ = i + e − A. At minimum deviation the ray passes symmetrically (r = A/2):

μ=sin⁡(A+δm2)sin⁡(A2),thin prism: δ=(μ−1)A

μ is larger for violet than for red, so white light spreads into a spectrum. Dispersive power ω=μv−μrμy−1. Two prisms can cancel dispersion while keeping deviation (achromatic), or cancel deviation while keeping dispersion (direct vision). A rainbow is refraction, dispersion and internal reflection in raindrops; the primary bow has red outside.

5. The eye and its defects

The eye lens changes its focal length (accommodation) to focus objects from the near point (25 cm for a normal eye) to infinity.

Defect Problem Correction
Myopia (short sight) far point too close concave lens, f = −(far point distance)
Hypermetropia (long sight) near point too far convex lens, image of an object at 25 cm placed at the near point
Presbyopia weak accommodation with age bifocals
Astigmatism cornea curved unequally cylindrical lens

6. Microscopes and telescopes

  • Simple microscope (magnifier): M=1+Df (image at D = 25 cm), or D/f (image at infinity, relaxed eye).
  • Compound microscope: M=mo×me≈Lfo⋅Dfe (final image at infinity, L the tube length). Both lenses have short focal lengths.
  • Astronomical telescope: M=fofe at normal adjustment, tube length f_o + f_e; with the image at D, M=fofe(1+feD). A large objective gathers more light and resolves finer detail. Reflecting telescopes use a concave mirror: no chromatic aberration and easier to build large.

Worked example (level 4). A compound microscope has f_o = 1 cm and f_e = 5 cm, with the lenses 20 cm apart, and the final image at 25 cm. The eyepiece needs its object at u_e: 1/(−25) − 1/u_e = 1/5 gives u_e = −25/6 ≈ −4.17 cm. So the objective’s image is 20 − 4.17 = 15.83 cm behind it, and its object at u_o with 1/15.83 − 1/u_o = 1 gives u_o ≈ −1.07 cm. m_o = 15.83/(−1.07) ≈ −14.8, m_e = 1 + 25/5 = 6. M ≈ −89 (inverted).

  • Cartesian signs: along the light positive; object in front has negative u.
  • Mirror 1/v + 1/u = 1/f, m = −v/u; lens 1/v − 1/u = 1/f, m = v/u.
  • Snell μ₁ sin i = μ₂ sin r; apparent depth d/μ; sin C = 1/μ for glass to air.
  • Lensmaker 1/f = (μ − 1)(1/R₁ − 1/R₂); in a liquid use μ_lens/μ_liquid − 1.
  • Contact P = P₁ + P₂; silvered lens P = 2P_lens + P_mirror; displacement f = (D² − x²)/4D.
  • Prism μ = sin((A + δm)/2)/sin(A/2); thin prism δ = (μ − 1)A.
  • Myopia: concave lens; hypermetropia: convex.
  • Microscope M ≈ (L/f_o)(D/f_e); telescope f_o/f_e.

Check yourself

1A convex lens of focal length 20 cm is dipped in water (μ = 1.33). Its glass has μ = 1.5. Its focal length becomes about:
2Total internal reflection can happen when light goes:
3An object is at the centre of curvature of a concave mirror. Its image is:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Optics
  • Refractive indices of water (1.33) and crown glass (about 1.5): refractiveindex.info database https://refractiveindex.info

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.