All lessons

Module 10: Elasticity of solids · Lesson 10.1 · about 32 min

Elasticity of solids

Stress and strain, Hooke's law, Young's, bulk and shear moduli, Poisson's ratio, the stress-strain curve, elastic energy, wires as springs in series and parallel, wires under their own weight, thermal stress, bulk modulus of gases, hysteresis and torsion.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 32 minutes. By the end you will be able to find the stretch, squeeze or twist of a body under load, read a stress-strain curve, work out stored elastic energy, and solve the harder problems: wires in series, wires under their own weight, thermal stress and rotating rods.

Every solid is a lattice of atoms held by springs (the bonds). Pull on it and the springs stretch a little; let go and they pull back. Stress is the load per unit area, strain is the fractional change in shape, and their ratio, the modulus, tells how stiff the springs are.

1. Stress and strain

Stress = restoring force per unit area, σ=F/A, in pascals (N/m²). Strain = fractional change, with no unit. There are three kinds:

Kind Strain Modulus
Longitudinal (pull or push along a length) ΔL/L Young’s modulus Y=F/AΔL/L=FLAΔL
Volume (equal pressure all round) ΔV/V Bulk modulus B=−ΔPΔV/V; compressibility = 1/B
Shear (force along a face) angle θ ≈ x/h Shear modulus η=F/Aθ (also written G)

Hooke’s law: within the proportional limit, stress ∝ strain. Typical values: steel Y ≈ 2 × 10¹¹ Pa, copper 1.1 × 10¹¹, aluminium 0.7 × 10¹¹, rubber only about 10⁶ Pa. Solids have all three moduli; liquids and gases have only a bulk modulus, because they cannot resist a shear.

F, A
the load, and the cross-section area it acts on (πr² for a wire: use the radius)
L, ΔL
original length and change in length
Y, B, η
Young's, bulk and shear moduli, in Pa; a property of the material, not of the wire's size
σ (Poisson)
Poisson's ratio: sideways strain ÷ lengthwise strain
Physical meaning
A thick wire shares the load among more bonds, so it stretches less; a long wire has more bonds in a row, each stretching a little, so it stretches more.

A stretched wire gets thinner. Poisson’s ratio σ=−Δd/dΔL/L. In theory it lies between −1 and 0.5; real materials have 0.2 to 0.4, and rubber is close to 0.5 (its volume hardly changes). For a wire, ΔVV=(1−2σ)ΔLL.

For a uniform (isotropic) material:

Y=3B(1−2σ)=2η(1+σ),9Y=1B+3η

3. The stress-strain curve

Pull a wire slowly and plot stress against strain. Choose a material and move the slider.

A stress-strain curve. The straight start is Hooke's law. Past the elastic limit the wire keeps a permanent stretch when unloaded (dashed line). Past the ultimate stress it necks and breaks. Rubber stays elastic to huge strains but returns along a lower curve.
Proportional limit. Up to here stress ∝ strain; the slope is Y.
Elastic limit (yield point). Up to here the wire returns to its length when unloaded. Beyond it, it flows plastically.
Ultimate (tensile) strength. The greatest stress the wire can take. After it, the wire narrows at one place and breaks.
Ductile vs brittle. Ductile metals (copper, mild steel) have a long plastic region, so they can be drawn into wires. Brittle ones (glass, cast iron) break soon after the elastic limit.
Elastomers and hysteresis. Rubber has no straight part and unloads along a lower curve. The area between the curves is energy turned into heat, which is why rubber damps vibrations.

Breaking stress depends only on the material. The longest wire that can hang under its own weight (breaking length) is L=breaking stressρg, the same for any thickness.

“A thicker rope has a higher breaking stress.” The breaking stress is a property of the material. A thicker rope has a higher breaking load (stress × area), which is why ropes are thick.

4. Elastic potential energy

Stretching a wire takes work, stored as elastic energy:

U=12FΔL=12×stress×strain×volume,u=UV=stress22Y

Sudden loading. Hang a load suddenly and the wire overshoots: it stretches up to twice the steady extension before settling. Half of the gravitational energy lost (mg ΔL) is stored; the other half becomes heat as the oscillation dies.

5. Wires as springs

A wire behaves like a spring of constant k=YAL. So:

  • Series (end to end, same force): 1k=1k1+1k2; extensions add.
  • Parallel (side by side, same extension): k=k1+k2; forces add.
  • Cut a wire in half: k doubles. Y does not change.

Wire under its own weight (density ρ, length L): the tension grows from zero at the bottom to the full weight at the top. Total stretch ΔL=ρgL22Y, the same as if half the weight hung at the end. The greatest stress is at the top.

Rotating rod (JEE Advanced). A rod of length L spun at ω about one end has tension T(x)=12ρAω2(L2−x2), greatest at the axis.

6. Thermal stress

A rod heated by ΔT wants to grow by LαΔT. If walls stop it, they squeeze it back, giving a strain αΔT and

thermal stress=YαΔT,F=YAαΔT

The length does not matter. This is why railway lines and bridges have gaps.

7. Bulk modulus, gases and torsion

  • Water: B ≈ 2.2 × 10⁹ Pa. At 1 km depth (about 10⁷ Pa extra) water squeezes by only 0.45%.
  • A gas compressed slowly (isothermal) has B = P; compressed quickly (adiabatic, as in a sound wave), B = γP.
  • Torsion. Twisting a wire of radius r and length L through angle θ needs a couple τ=πηr42Lθ. The r⁴ makes thin fibres very easy to twist, which is why they are used in sensitive balances.
  • Stress = F/A (Pa); strain = fractional change (no unit); modulus = stress/strain.
  • Y = FL/(AΔL); B = −ΔP/(ΔV/V); η = shear stress/shear angle. Liquids and gases have only B.
  • Poisson’s ratio = sideways strain/lengthwise strain, between −1 and 0.5; Y = 2η(1 + σ) = 3B(1 − 2σ).
  • Stress-strain curve: proportional limit, elastic limit, ultimate stress, fracture; ductile vs brittle; rubber shows hysteresis.
  • Energy = ½FΔL; energy per volume = stress²/2Y; sudden loading doubles the first stretch.
  • A wire is a spring with k = YA/L; series and parallel like springs; own weight stretches ρgL²/2Y.
  • Thermal stress = YαΔT, independent of length. Gas: B = P (slow), γP (fast). Torsion couple ∝ r⁴/L.

Check yourself

1Two wires of the same material and length have diameters in the ratio 1 : 2. The same load hangs on each. Their extensions are in the ratio:
2Steel is called more elastic than rubber because:
3The Young's modulus of a perfectly rigid body would be:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Properties of solids (elastic behaviour, stress-strain relationship, Hooke's law, moduli, Poisson's ratio, elastic energy)
  • Typical elastic moduli of steel, copper, aluminium, glass, rubber and water: CRC Handbook of Chemistry and Physics, rounded to the values entrance exams use

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.