All lessons

Module 13: Thermodynamics · Lesson 13.2 · about 28 min

Thermodynamics: question types and traps

Every way entrance exams ask about thermodynamics: first-law sign problems, work from P-V graphs, the four standard processes, comparing isothermal and adiabatic curves, polytropic processes, specific heats of mixtures, cycles and their efficiency, Carnot engines, refrigerators and entropy, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 28 minutes. Read the lesson Thermodynamics first. Here you meet every question type, with a worked example and the trap, then practise.

For every process, fill in a three-column table: Q, ΔU and W. ΔU comes from the temperature change, W from the area under the P-V curve, and Q from the first law. Most questions are just one cell of that table.

The ten question types

1. First-law signs. Q = ΔU + W with Q in and W by the gas. Trap: chemistry books use W on the gas, which flips the sign.
2. Work from a P-V graph. Area under the curve; cycle area for net work. Trap: on a V-P graph (axes swapped) clockwise means the opposite.
3. Standard processes. Isochoric, isobaric, isothermal, adiabatic: know W, Q, ΔU for each. Trap: ΔU = nC_vΔT even in an isobaric process.
4. Isothermal vs adiabatic. Adiabatic is γ times steeper; for the same expansion it does less work and ends colder.
5. Other graphs. P-T, V-T and T-S diagrams: redraw on P-V first. On V-T, a line through the origin is isobaric.
6. Polytropic and P ∝ V processes. C = C_v + R/(1 − x). For P ∝ V, x = −1 and C = C_v + R/2.
7. Specific heats and mixtures. C_v of a mixture = Σn C_v/Σn; γ from the mixture's C_p/C_v, not the average of the γs.
8. Cycles and efficiency. η = net work/heat absorbed (only the positive Q's). Trap: dividing by the net heat.
9. Carnot, refrigerators, heat pumps. 1 − T_c/T_h; β = T_c/(T_h − T_c); heat pump β + 1. Trap: Celsius instead of kelvin.
10. Second law and entropy. Statement questions; ΔS = Q/T for phase changes and reservoirs; entropy of an isolated system never falls.

Worked examples

Example 1 (level 3, isobaric). 2 mol of a diatomic gas is heated at constant pressure from 300 K to 400 K. Find Q, ΔU and W. (R = 8.3 J/mol K)

Solution. ΔU = nC_vΔT = 2 × 2.5 × 8.3 × 100 = 4150 J. W = nRΔT = 1660 J. Q = nC_pΔT = 2 × 3.5 × 8.3 × 100 = 5810 J. Check: 4150 + 1660 = 5810. ✓ The fraction of heat that becomes work is R/C_p = 2/7.

Example 2 (level 4, mixture). 1 mol of helium is mixed with 1 mol of oxygen. Find γ of the mixture.

Solution. C_v = (1.5R + 2.5R)/2 = 2R. C_p = C_v + R = 3R. γ = 1.5. Trap: averaging 1.67 and 1.4 gives 1.53.

Example 3 (level 4, two Carnot engines). Engine A works between 800 K and T; engine B uses A’s rejected heat and works between T and 200 K. Find T if both have the same efficiency, and if both do the same work.

Solution. Same efficiency: 1−T/800=1−200/T, so T² = 160 000 and T = 400 K (the geometric mean). Same work: each takes the same share of the temperature drop, so T = (800 + 200)/2 = 500 K (the arithmetic mean).

Example 4 (level 5, P ∝ V). An ideal monatomic gas expands so that P ∝ V, from V₀ to 2V₀ starting at temperature T₀. Find the heat absorbed per mole.

Solution. PV ∝ V², so T ends at 4T₀, ΔT = 3T₀. Molar heat C = C_v + R/(1 − x) with x = −1: C = 1.5R + 0.5R = 2R. Q = 2R × 3T₀ = 6RT₀. Check: W = area of trapezium = ½(P₀ + 2P₀)V₀ = 1.5RT₀, ΔU = 4.5RT₀, total 6RT₀. ✓

“In a cycle the gas gains no energy, so the engine does no work.” ΔU is zero over a cycle, but the net heat in is not. The net work out equals the net heat in, and it is the area of the loop.

Q-ΔU-W table
one row per step of a process; ΔU column adds to zero over a cycle
Heat absorbed
for efficiency, add only the steps where Q is positive
Physical meaning
Engines are limited by the second law, not by engineering: some heat must always be dumped at the cold side.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: signs, P-V areas, standard processes, isothermal vs adiabatic, other graphs, polytropic, mixtures, cycles, Carnot and refrigerators, entropy.
  • ΔU = nC_vΔT always for an ideal gas; W = nRΔT at constant pressure.
  • Mixture γ from total C_p/C_v, never by averaging γ.
  • Cycle efficiency = net work/heat absorbed.
  • Two Carnot engines in series: equal efficiency at √(T₁T₂), equal work at (T₁ + T₂)/2.

Check yourself

1A gas absorbs 500 J of heat and does 200 J of work. Its internal energy:
2Equal amounts of a gas expand from the same state to the same final volume, once isothermally and once adiabatically. More work is done:
3A refrigerator has a coefficient of performance of 4. To remove 400 J from the inside, it needs:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Thermodynamics; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.