All lessons

Module 11: Fluids: pressure, flow, viscosity and surface tension · Lesson 11.2 · about 28 min

Fluids: question types and traps

Every way entrance exams ask about fluids: pressure and U-tubes, hydraulic machines, buoyancy and floating, accelerating and rotating containers, continuity and Bernoulli, efflux and range, viscosity and terminal speed, Poiseuille, bubbles and drops, and capillary rise, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 28 minutes. Read the lesson Fluids first. Here you meet every question type, with a worked example and the trap, then practise.

Fluid statics is one rule (pressure grows by ρgh going down, and is equal at equal levels in one connected liquid). Fluid flow is two rules (continuity and Bernoulli). Surface tension adds one more (excess pressure 2T/r per surface). Name the rule, and the question is half done.

The ten question types

1. Pressure and U-tubes. Equate pressures at the same level in the same liquid. Trap: equating across two different liquids at a level that is not the interface.
2. Hydraulic machines and barometers. F₂/F₁ = A₂/A₁. Trap: using diameters directly instead of their squares.
3. Floating and apparent weight. Fraction under = ρ_body/ρ_fluid; bodies in two liquid layers share the buoyancy. Trap: melting ice and changing levels.
4. Buoyancy with acceleration. In a lift, floating depth does not change; a tied ball's string tension does.
5. Accelerating and rotating containers. tan θ = a/g; paraboloid ω²r²/2g. Trap: spilling questions need the tilted surface to reach the rim.
6. Continuity and Bernoulli. Pipes, Venturi meters, wings. Trap: forgetting the height term when the pipe is not level.
7. Efflux, range and emptying. v = √(2gh); range 2√(h(H − h)); time to empty a tank ∝ √H. Trap: treating the outflow speed as constant while the level falls.
8. Viscosity and terminal speed. v_t ∝ r²(ρ − σ)/η. A bubble rising in water has σ > ρ, so its terminal velocity points up.
9. Poiseuille and Reynolds. Q ∝ Pr⁴/(ηL); pipes in series add resistance like resistors.
10. Surface tension, drops and capillaries. Work = TΔA (double for films), excess pressure 2T/r or 4T/r, h = 2T cos θ/(ρgr). Trap: a soap film has two surfaces.

Worked examples

Example 1 (level 3, two liquids). A U-tube holds mercury (13.6 g/cm³). 13.6 cm of water is poured into one arm. How much higher does the water surface stand than the mercury surface in the other arm?

Solution. At the level of the water-mercury interface: 1×13.6=13.6×h, so the mercury in the other arm stands h = 1 cm above that interface. The water surface is 13.6 cm above it, so the difference is 12.6 cm.

Example 2 (level 4, emptying a tank). A tank of area A has water to height H and a small hole of area a at the bottom. How long does it take to empty?

Solution. −Adhdt=a2gh. Separate and integrate from H to 0: t=Aa2Hg. Half the time empties three-quarters of the tank, because the flow is fastest at the start.

Example 3 (level 4, rotating liquid). A cylinder of radius 10 cm holds water and spins about its axis at 10 rad/s. How much higher is the water at the rim than at the centre? (g = 10 m/s²)

Solution. Δy=ω2R22g=100×0.0120 = 5 cm.

Example 4 (level 5, merging drops). 1000 tiny water drops, each of radius 0.01 mm, combine into one drop. Find the energy released. (T = 0.07 N/m)

Solution. R = 1000^(1/3) × 0.01 mm = 0.1 mm. Area change = 4π(1000r2−R2)=4π(10−7−10−8)=4π×9×10−8 m². Energy = T × ΔA ≈ 7.9 × 10⁻⁸ J.

“Bernoulli’s equation works for any flow.” Only for steady, streamline flow of an incompressible, non-viscous fluid, along a streamline. Viscous flow in a long pipe loses pressure along the pipe even when it is level and its speed is constant.

Same-level rule
equal pressures only at equal levels in one connected, still body of the same liquid
Flow resistance
8ηL/(πr⁴): pipes in series add, in parallel combine like parallel resistors
Physical meaning
Surface tension always tries to shrink a surface; a curved surface can only stay curved if the pressure on its inner side is higher.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: U-tubes, hydraulics, floating, buoyancy with acceleration, tilted and spinning surfaces, Bernoulli, efflux, terminal speed, Poiseuille, surface tension.
  • U-tube: equate pressures at the lower interface level.
  • Tank empties in (A/a)√(2H/g); half the time empties three-quarters.
  • Spinning liquid rises ω²R²/2g at the rim.
  • Merging drops release T × (loss of area) as heat.

Check yourself

1An ice cube floats in a glass of water. When it melts, the water level:
2The terminal speed of a small ball in oil is 2 cm/s. A ball of the same material with twice the radius has terminal speed:
3Water rises 6 cm in a capillary tube. In a tube of half the radius it would rise:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Mechanical properties of fluids; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.