Module 12: Heat, expansion, calorimetry and heat transfer · Lesson 12.2 · about 28 min
Heat, expansion, calorimetry and heat transfer: question types and traps
Every way entrance exams ask about thermal properties: scale conversions, expansion and density, pendulum clocks and thermal stress, calorimetry with ice and steam, heating curves, conduction in series and parallel, ice on ponds, radiation laws and Newton's law of cooling, each with a method and its trap.
Physics · Class 11 · about 28 minutes. Read the lesson Heat, expansion, calorimetry and heat transfer first. Here you meet every question type, with a worked example and the trap, then practise.
The ten question types
Worked examples
Example 1 (level 3, not all ice melts). 100 g of ice at 0 °C is put into 200 g of water at 30 °C. Find the final state. (c = 4.2 J/g °C, L_f = 336 J/g)
Solution. Water cooling to 0 °C gives 200 × 4.2 × 30 = 25 200 J. Melting all the ice needs 100 × 336 = 33 600 J, which is more. So the final temperature is 0 °C, and the ice melted is 25 200/336 = 75 g, leaving 25 g of ice.
Example 2 (level 4, three slabs). A wall has three layers of equal area: 2 cm of brick (k = 0.6), 1 cm of foam (k = 0.03) and 2 cm of brick. Inside is 25 °C, outside 5 °C. What fraction of the temperature drop is across the foam?
Solution. Per unit area, R = L/k: brick 0.0333 each, foam 0.333. Total 0.4. Foam share = 0.333/0.4 = 83%, a drop of about 16.7 °C. The thin foam does most of the insulating.
Example 3 (level 4, radiation of two spheres). Two black spheres of radii 1 cm and 2 cm are at 2000 K and 1000 K. Compare the power they radiate.
Solution. P ∝ r²T⁴: = 4 : 1. The small hot sphere radiates four times as much.
Example 4 (level 5, ice on a pond). Air above a pond is at −10 °C. Ice is 5 cm thick. How long until it is 10 cm thick? (k = 2.2 W/m K, ρ = 917 kg/m³, L = 3.34 × 10⁵ J/kg)
Solution. ≈ 5.2 × 10⁴ s ≈ 14.5 h.
“A thermos keeps tea hot by blocking radiation only.” It fights all three: the vacuum stops conduction and convection, and the silvered walls (low emissivity) cut radiation. A stopper stops convection out of the top.
- Thermal resistance
- R = L/(kA); temperature drops share out in proportion to R, like voltages in series resistors
- Mixture check
- compare "heat available down to 0 °C" with "heat needed to melt all the ice" before writing the equation
- Physical meaning
- Radiation grows as T⁴, so it dominates at high temperatures, while conduction and convection dominate near room temperature.
Practise
The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.
- Ten types: scales, expansion, expansion effects, density, calorimetry, heating curves, conduction, special shapes, radiation, cooling.
- In ice problems, check whether all the ice melts before solving for T.
- Slabs in series: the layer with the largest L/k takes most of the temperature drop.
- P ∝ r²T⁴ with T in kelvin.
- Newton’s law: use (T₁ − T₂)/t = k(average − T₀).
Check yourself
Sources
- JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Thermal properties of matter; question patterns studied from the exams' published papers (no questions copied)
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.