Module 18: Electric potential and capacitors · Lesson 18.2 · about 28 min
Electric potential and capacitors: question types and traps
Every way entrance exams ask about potential and capacitors: potential of charge groups and bodies, work and energy, E from V, connected spheres, capacitor networks and bridges, dielectric slabs, battery on or off, charge sharing and energy loss, plate forces and RC circuits, each with a method and its trap.
Physics · Class 12 · about 28 minutes. Read the lesson Electric potential and capacitors first. Here you meet every question type, with the method and the trap, then practise.
The ten question types
Worked examples
Example 1 (level 3, concentric shells). Shell A (radius a) has charge q and shell B (radius b > a) has charge Q. Find the potential of A.
Solution. At radius a, A contributes kq/a; B is outside, so its potential there is its surface value kQ/b. V_A = kq/a + kQ/b. Now earth A: V_A = 0 gives . Trap: earthing does not make the charge zero; it makes the potential zero.
Example 2 (level 4, battery off, then gap doubled). A 10 µF capacitor is charged to 50 V and isolated. The gap is doubled. Find the new voltage and the work done.
Solution. Q = 500 µC stays. C becomes 5 µF, so V = 100 V. Energy rises from Q²/2C = 12.5 mJ to 25 mJ, so the work done pulling the plates apart is 12.5 mJ. Check: plate force Q²/(2ε₀A) is constant, and force × distance gives the same answer.
Example 3 (level 4, network with a bridge). Capacitors 2 µF and 4 µF form one arm, 1 µF and 2 µF the other, with 5 µF across the middle. Is the 5 µF charged?
Solution. Balance needs 2/4 = 1/2: yes, it balances. Middle points are at the same potential, so the 5 µF has no charge. Equivalent: (2 series 4) + (1 series 2) = 4/3 + 2/3 = 2 µF.
Example 4 (level 5, RC with two resistors). A capacitor C is charged by a battery V through R₁, with R₂ connected directly across C. Find the final charge and the time constant.
Solution. Finally no current goes into C, so a current V/(R₁ + R₂) flows through R₁ and R₂, and the voltage across C is VR₂/(R₁ + R₂). Final charge . Seen from C (battery shorted), R₁ and R₂ are in parallel: . Trap: using τ = R₁C.
“A dielectric always lowers the energy stored.” Only with the battery removed. With the battery connected, Q rises K times and U = ½CV² rises K times; the battery supplies 2ΔU and half goes into pulling the slab in.
- Fixed quantity
- battery on: V; battery off: Q; isolated plate group: its total charge
- R_eq in τ
- the resistance between the capacitor's terminals with every battery replaced by a wire
- Physical meaning
- Every capacitor answer is a bookkeeping exercise: track charge, which cannot vanish, and potential, which must be single-valued at every point.
Practise
The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.
- Ten types: potential of charges, work and energy, E from V, spheres and shells, networks, slabs, battery on or off, sharing, forces, RC.
- Potential is a scalar: add with signs.
- Earthed means V = 0, not q = 0.
- Make a before and after table of C, Q, V, E, U for every change.
- Plate force is ½QE = Q²/(2ε₀A).
- τ uses the resistance seen from the capacitor’s terminals.
Check yourself
Sources
- JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Electrostatic potential and capacitance; question patterns studied from the exams' published papers (no questions copied)
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.