Module 41: Hydrocarbons · Lesson 41.1 · about 40 min
Hydrocarbons
Alkanes (preparation, free radical halogenation and its selectivity, combustion, conformations), alkenes (preparation, Markovnikov and anti-Markovnikov addition, rearrangements, hydration methods, ozonolysis, oxidation), alkynes (acidity, partial reduction, hydration) and aromatic hydrocarbons (benzene, Hückel's rule, electrophilic substitution and directing groups).
Chemistry · Class 11 · about 40 minutes. By the end you will be able to make and convert alkanes, alkenes, alkynes and arenes, predict the main product of any addition or substitution, explain conformations, and decide whether a ring is aromatic and where a new group will enter a benzene ring.
1. Alkanes: making them
- Hydrogenation of alkenes or alkynes with H₂ over Ni, Pt or Pd.
- Wurtz reaction: 2RX + 2Na → R-R + 2NaX in dry ether. The carbon count doubles, so it makes symmetric alkanes with an even number of carbons; two different halides give a messy mixture. Methane cannot be made this way.
- Decarboxylation: heating a sodium carboxylate with soda lime (NaOH + CaO) gives an alkane with one carbon fewer: CH₃COONa → CH₄.
- Kolbe electrolysis: electrolysis of sodium carboxylate solution gives R-R at the anode (2RCOO⁻ → R-R + 2CO₂ + 2e⁻).
2. Alkanes: reactions and conformations
Free radical halogenation in light: initiation (Cl₂ → 2Cl•), propagation (Cl• + CH₄ → HCl + CH₃•, then CH₃• + Cl₂ → CH₃Cl + Cl•) and termination (two radicals join). The order of reactivity of hydrogens is 3° > 2° > 1°, matching radical stability. Chlorine is fast and unselective (about 5 : 3.8 : 1 per H); bromine is slow and very selective (about 1600 : 82 : 1), so it nearly always takes the tertiary H. Iodination is reversible and fluorination explosive.
Combustion: CₓHᵧ + (x + y/4) O₂ → x CO₂ + (y/2) H₂O. Gas volume problems use this ratio directly at the same temperature and pressure.
Conformations are the shapes made by turning about a C-C single bond. In ethane, the staggered form is 12 kJ/mol lower than the eclipsed form (the C-H bonds repel when lined up). In butane (looking along C2-C3), anti is lowest, gauche (CH₃ groups 60° apart) is 3.8 kJ/mol higher, and the fully eclipsed form is highest. These barriers are small, so at room temperature the forms swap rapidly and cannot be separated. Cyclohexane prefers the strain-free chair shape over the boat.
- CxHy
- a hydrocarbon with x carbons and y hydrogens
- Dihedral angle
- the angle between a bond on the front carbon and a bond on the back carbon, seen along the C-C bond
- Markovnikov's rule
- in HX addition, H goes to the double bond carbon that already has more H, because that route passes through the more stable carbocation
- 4n + 2
- Hückel's rule: a cyclic, planar, fully conjugated ring with 2, 6, 10... π electrons is aromatic
- Physical meaning
- Every addition and substitution product in this chapter is decided by which intermediate (carbocation or radical) is more stable. Find the intermediate and you have the product.
3. Alkenes
Preparation: dehydration of alcohols with hot concentrated H₂SO₄ (or Al₂O₃), and dehydrohalogenation of alkyl halides with alcoholic KOH. When two alkenes can form, the more substituted (more stable) one usually wins: Saytzeff (Zaitsev) rule. A bulky base like (CH₃)₃CO⁻ gives the less substituted Hofmann product. Partial reduction of alkynes also gives alkenes (section 4).
Electrophilic addition.
- H₂ over Ni: alkane. The heat released is smaller for more stable alkenes (trans less than cis).
- Br₂ in CCl₄: the red-brown colour disappears (test for unsaturation); the two Br add anti through a bromonium ion.
- HX: Markovnikov product via the more stable carbocation; reactivity HI > HBr > HCl. A carbocation may rearrange by a hydride or methyl shift to a more stable one, giving an unexpected product.
- HBr with peroxide (Kharasch effect): anti-Markovnikov, through radicals. Only HBr does this; HCl and HI do not.
- Hydration: dilute H₂SO₄ gives the Markovnikov alcohol (rearrangements possible); oxymercuration-demercuration (Hg(OAc)₂/H₂O, then NaBH₄) gives the Markovnikov alcohol with no rearrangement; hydroboration-oxidation (BH₃, then H₂O₂/OH⁻) gives the anti-Markovnikov alcohol by syn addition.
Oxidation: cold, dilute, alkaline KMnO₄ (Baeyer’s reagent) gives a diol and loses its purple colour. Hot acidic KMnO₄ cuts the double bond: =CH₂ becomes CO₂, =CHR becomes RCOOH, =CR₂ becomes a ketone. Ozonolysis (O₃, then Zn/H₂O) cuts the double bond into two carbonyl compounds; working back from the products locates the double bond. Alkenes also polymerise (ethene to polythene).
“Markovnikov’s rule is about where the X goes.” The rule is really about the carbocation. H⁺ adds first, to whichever carbon leaves the more stable carbocation; X⁻ then joins the positive carbon. When a group like CF₃ makes the “Markovnikov” cation unstable, the product goes the other way.
4. Alkynes
Ethyne is made from calcium carbide and water (CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂) or by double dehydrohalogenation of a vicinal dihalide with alcoholic KOH then NaNH₂. A hydrogen on a triple bond carbon is weakly acidic (sp carbon holds the electron pair well): terminal alkynes react with Na or NaNH₂ and give a white precipitate with ammoniacal AgNO₃ (a test that tells but-1-yne from but-2-yne).
- Reduction: H₂ with Lindlar’s catalyst (poisoned Pd) gives the cis alkene; Na in liquid NH₃ gives the trans alkene; excess H₂/Ni gives the alkane.
- Hydration with dilute H₂SO₄ and HgSO₄: an enol forms first and tautomerises to a carbonyl. Ethyne gives ethanal; other alkynes give ketones (propyne gives propanone).
- Addition of HX twice gives a geminal dihalide (both X on the same carbon).
- Red-hot iron tube: three ethyne molecules join into benzene.
5. Aromatic hydrocarbons
Benzene C₆H₆ is a flat regular hexagon; all six C-C bonds are equal (139 pm, between single and double). The six π electrons are spread over the whole ring, which makes it about 150 kJ/mol more stable than a ring with three separate double bonds (the resonance energy). That is why benzene resists addition.
Aromaticity (Hückel’s rule): a molecule is aromatic if it is cyclic, planar, fully conjugated (every ring atom has a p orbital) and has 4n + 2 π electrons. Benzene (6), the cyclopentadienyl anion (6), the cycloheptatrienyl (tropylium) cation (6), pyridine and furan are aromatic. A planar conjugated ring with 4n π electrons (cyclobutadiene) is anti-aromatic and very unstable. Cyclooctatetraene avoids this by folding into a tub: non-aromatic.
Electrophilic substitution. An electrophile attacks the ring to form a carbocation (the σ complex or arenium ion), which then loses H⁺ to restore the aromatic ring.
| Reaction | Reagents | Electrophile |
|---|---|---|
| Nitration | conc. HNO₃ + conc. H₂SO₄ | NO₂⁺ |
| Halogenation | Cl₂ or Br₂ with FeCl₃ or FeBr₃ | Cl⁺ (Br⁺) |
| Sulfonation | fuming H₂SO₄ | SO₃ |
| Friedel-Crafts alkylation | RCl + anhydrous AlCl₃ | R⁺ (may rearrange) |
| Friedel-Crafts acylation | RCOCl + anhydrous AlCl₃ | RCO⁺ |
Directing effects. A group already on the ring decides where the next one goes.
- Ortho and para directors, activating: -OH, -NH₂, -OR, -NHCOCH₃ (lone pair donated by resonance), -CH₃ and other alkyl groups (+I, hyperconjugation).
- Ortho and para directors, deactivating: halogens (−I outweighs +R for the rate, but +R still steers to o and p).
- Meta directors, deactivating: -NO₂, -CN, -CHO, -COR, -COOH, -SO₃H, -NR₃⁺ (they pull electrons out and make the o and p positions most positive).
Friedel-Crafts reactions fail on rings with strong meta directors such as nitrobenzene. Side-chain oxidation: hot KMnO₄ turns any alkyl group with at least one benzylic H into -COOH (toluene to benzoic acid); tert-butylbenzene is not oxidised.
“Every cyclic molecule with alternating double bonds is aromatic.” It must also be planar and have 4n + 2 π electrons. Cyclobutadiene (4 π electrons) is anti-aromatic and cyclooctatetraene (8, tub-shaped) is non-aromatic. Count the π electrons, including lone pairs or charges that join the ring system.
- Wurtz doubles the carbons; decarboxylation removes one; Kolbe gives R-R at the anode.
- Halogenation selectivity per H: Cl 5 : 3.8 : 1, Br 1600 : 82 : 1 (3° : 2° : 1°).
- Butane: anti 0, gauche 3.8, fully eclipsed highest; ethane barrier 12 kJ/mol.
- Markovnikov through the more stable carbocation; anti-Markovnikov with HBr + peroxide or hydroboration.
- Lindlar gives cis alkenes, Na/NH₃ trans; alkyne hydration gives ethanal or ketones.
- Ozonolysis cuts C=C into carbonyls; Baeyer’s reagent gives diols (purple colour lost).
- Aromatic: cyclic, planar, conjugated, 4n + 2 π electrons.
- o/p directors: OH, NH₂, OR, alkyl, halogens (deactivating); meta: NO₂, CN, CHO, COOH, SO₃H.
Check yourself
Sources
- IUPAC (2013), Nomenclature of Organic Chemistry: IUPAC Recommendations and Preferred Names https://iupac.qmul.ac.uk/BlueBook/
- Torsional energies of ethane and butane: Pitzer K. S. (1951), Discussions of the Faraday Society 10, 66, and standard physical organic chemistry data
- NEET (UG) and JEE Main / JEE Advanced 2026 syllabi: Hydrocarbons
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.