All lessons

Module 53: Practical chemistry: salt analysis, titrations and tests · Lesson 53.2 · about 24 min

Practical chemistry: salt analysis, titrations and tests: question types and traps

Every way entrance exams ask about laboratory chemistry: standard solutions, indicator choice, acid-base and redox titration calculations, anion and cation identification, group reagents, Lassaigne's test, functional group tests, preparations and Rf values, each with a method and its trap. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 and 12 laboratory · about 24 minutes. Read Practical chemistry: salt analysis, titrations and tests first. Here are the question types, worked examples and practice.

Lab questions are either "how much" or "what is it". For "how much", write the balanced equation or use equivalents and keep track of millimoles. For "what is it", read every observation as a clue and rule options out one at a time: a single colour or gas is rarely enough, so look for the confirming second clue.

The question types

1. Standard solutions. Mass = M × V × molar mass of what you weigh. Trap: use 126 for oxalic acid dihydrate, not 90.
2. Indicator choice. Match the pH jump. Trap: methyl orange for a weak acid titration gives a far-too-early end point.
3. Acid-base calculations. mmol acid × basicity = mmol base × acidity. Trap: oxalic acid and H₂SO₄ are dibasic.
4. Redox titrations. Electrons balance; KMnO₄ 5, K₂Cr₂O₇ 6, Fe²⁺ 1, oxalate 2, thiosulphate 1. Trap: iodometry: 1 I₂ uses 2 thiosulphate.
5. Anion identification. Gas, smell, precipitate and its solubility. Trap: CO₂ and SO₂ both turn lime water milky; AgBr is only partly soluble in ammonia.
6. Cation groups. Group reagent and why. Trap: without NH₄Cl, Mg(OH)₂ would come down in group III.
7. Organic tests. Lassaigne, functional groups. Trap: the blood-red colour means N and S together, not iron.
8. Preparations and chromatography. Reagents, conditions, Rf. Trap: acetylation protects the amine before nitration in p-nitroacetanilide.

Worked examples

Example 1 (level 3, back-titration). 1.0 g of impure CaCO₃ is dissolved in 50 mL of 0.5 M HCl. The excess acid needs 20 mL of 0.5 M NaOH. Find the % purity. Solution. HCl taken 25 mmol, left 10 mmol, used 15 mmol. CaCO₃ + 2HCl, so CaCO₃ = 7.5 mmol = 0.75 g. Purity 75%.

Example 2 (level 4, iodometry). 25 mL of a CuSO₄ solution is treated with excess KI; the freed iodine needs 20 mL of 0.1 M Na₂S₂O₃. Find the molarity of Cu²⁺. Solution. 2Cu²⁺ + 4I⁻ → 2CuI + I₂; I₂ + 2S₂O₃²⁻ → 2I⁻ + S₄O₆²⁻. So Cu²⁺ : S₂O₃²⁻ = 1 : 1. Cu²⁺ = 2 mmol in 25 mL: 0.08 M.

Example 3 (level 4, salt puzzle). A green salt gives a reddish-brown precipitate with NH₄OH/NH₄Cl after its solution is boiled with a drop of conc. HNO₃, and its solution with BaCl₂ gives a white precipitate insoluble in HCl. Identify it. Solution. Green salt, oxidised to Fe³⁺ by HNO₃, Fe(OH)₃ in group III: the cation is Fe²⁺. BaSO₄: sulphate. The salt is FeSO₄ (green vitriol, FeSO₄·7H₂O). HNO₃ is added in group III precisely to convert Fe²⁺ to Fe³⁺, whose hydroxide is far less soluble.

Example 4 (level 5, Lassaigne logic). A compound’s sodium extract gives no Prussian blue, gives violet with nitroprusside, and after boiling with HNO₃ gives a pale yellow precipitate with AgNO₃ that is partly soluble in ammonia. Which elements are present? Solution. No N; S present (violet); pale yellow, partly soluble in NH₃: Br. So the compound contains S and Br (besides C and H).

“Phenolphthalein works for every titration because it gives such a clear colour.” In a strong acid-weak base titration (HCl with ammonia) the equivalence pH is about 5, and phenolphthalein would only turn pink after a large excess of base. Clarity of colour does not matter if it changes at the wrong pH.

Back-titration
add a known excess of reagent, titrate what is left; used = taken − left
Iodometry ratio
1 I₂ : 2 S₂O₃²⁻
Physical meaning
Every lab test is a reaction you know (precipitation, complexing, redox) made visible.

Practise

  • Weigh the hydrate you use: oxalic acid dihydrate 126, Mohr’s salt 392.
  • Indicator: phenolphthalein for weak acids, methyl orange for weak bases.
  • Balance electrons in redox titrations; KMnO₄ needs dilute H₂SO₄.
  • Two clues for every ion: CO₂ vs SO₂, AgCl vs AgBr vs AgI with ammonia.
  • Group order and reagents: HCl, H₂S/HCl, NH₄OH/NH₄Cl, H₂S/NH₄OH, (NH₄)₂CO₃, Na₂HPO₄.
  • Lassaigne colours: Prussian blue (N), violet (S), blood red (N + S); boil with HNO₃ before AgNO₃.

Check yourself

1A salt solution gives a white precipitate with dilute HCl that dissolves on heating. The cation is:
2The brown ring test detects:
3A spot moves 3.0 cm while the solvent front moves 7.5 cm. The Rf value is:

Sources

  • JEE Main 2026 and NEET (UG) 2026 syllabi: Principles related to practical chemistry; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam pattern follow the official NMC and NTA notices checked on 2026-11-22; they can change every year, so check neet.nta.nic.in. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.