Module 11: Fluids: pressure, flow, viscosity and surface tension · Lesson 11.1 · about 38 min
Fluids: pressure, flow, viscosity and surface tension
Pressure and depth, Pascal's law and hydraulic machines, barometers and manometers, Archimedes' principle and floating, accelerating and rotating liquids, continuity and Bernoulli's equation, Torricelli and Venturi, viscosity, Stokes' law and terminal speed, surface tension, excess pressure and capillary rise.
Physics · Class 11 · about 38 minutes. By the end you will be able to find pressure anywhere in a still, accelerating or spinning liquid, decide how deep things float, use continuity and Bernoulli’s equation for flowing liquids, find terminal speeds, and solve drop, bubble and capillary problems.
1. Pressure in a liquid at rest
Pressure P = force per unit area (Pa). At depth h below a free surface open to the air:
P₀ is the atmospheric pressure (1 atm = 1.013 × 10⁵ Pa ≈ 76 cm of mercury ≈ 10.3 m of water). alone is the gauge pressure. All points at the same depth in one connected liquid at rest have the same pressure, whatever the vessel’s shape.
- Pascal’s law: extra pressure applied to an enclosed liquid reaches every part of it unchanged. A hydraulic lift multiplies force: , but the large piston moves less, so work is not multiplied.
- Barometer: a mercury column of height h balances the air: P₀ = ρgh. Manometer: a U-tube whose level difference shows a gauge pressure.
- U-tube with two liquids: equate pressures at the level of the lower interface: .
- Force on a dam of width w and depth H (gauge only): , acting H/3 above the bottom.
2. Buoyancy and floating
Archimedes’ principle: a body in a fluid feels an upward buoyant force equal to the weight of fluid it pushes aside: . The cause is the pressure difference between the bottom and top of the body.
- Fully under: apparent weight = true weight − ρ_fluid V g.
- Floating: weight = buoyant force, so the fraction under the surface is .
- In a lift accelerating up at a, both weight and buoyancy scale with (g + a), so a floating body floats at the same depth.
“Heavy things sink and light things float.” It is density that decides, not weight. A steel ship floats because its hull encloses so much air that its average density is less than water’s. A small pebble sinks.
3. Accelerating and rotating liquids (JEE)
- Container accelerating horizontally at a: the free surface tilts at , with the liquid piling up at the back.
- Accelerating up at a: g is replaced by g + a everywhere, so .
- Spinning about a vertical axis at ω: the surface becomes a paraboloid, , higher at the rim.
4. Flowing fluids: continuity and Bernoulli
In steady, streamline flow each particle follows the one before it along fixed lines. For an incompressible liquid, the volume per second through every cross-section is the same:
For an ideal liquid (no viscosity, incompressible, steady flow), energy per unit volume is constant along a streamline:
- P
- pressure, the energy per unit volume stored by squeezing
- ½ρv²
- kinetic energy per unit volume
- ρgh
- gravitational potential energy per unit volume
- A, v
- cross-section area and flow speed
- Physical meaning
- Bernoulli's equation is energy conservation for a fluid. To speed up, a fluid parcel must be pushed from a region of higher pressure to one of lower pressure.
Change the flow and the narrowing below.
Applications:
- Torricelli: water leaks from a hole at depth h below the surface with , like a body falling h. A hole at depth h in a tank of height H throws water a horizontal distance , greatest for a hole halfway down.
- Venturi meter: .
- Lift on a wing, spinning balls, sprayers: faster air on one side means lower pressure there.
5. Viscosity
Viscosity is internal friction between layers moving at different speeds. Newton’s law of viscosity: , with η the coefficient of viscosity (Pa s; 1 poise = 0.1 Pa s). Liquids get less viscous when heated; gases get more viscous.
- Stokes’ law: drag on a small sphere .
- Terminal speed (weight = buoyancy + drag): , where ρ is the sphere’s density and σ the liquid’s. It grows as r².
- Poiseuille: volume per second through a pipe . The r⁴ means a slightly narrowed blood vessel carries much less blood.
- Reynolds number : below about 2000 the flow is streamline, above about 3000 turbulent.
6. Surface tension
Molecules at a liquid surface are pulled inward by their neighbours, so the surface behaves like a stretched skin. Surface tension T = force per unit length along a line in the surface (N/m) = surface energy per unit area (J/m²). Making new surface takes work: (a soap film has two surfaces, so double the area).
Excess pressure inside a curved surface:
| Case | Excess pressure |
|---|---|
| Liquid drop, or air bubble inside a liquid | |
| Soap bubble in air (two surfaces) |
Smaller bubbles have higher pressure: join two soap bubbles by a tube and the small one shrinks into the big one.
Capillary rise: in a narrow tube of radius r, a liquid that wets the glass (contact angle θ < 90°) rises to
Mercury (θ > 90°) is pushed down instead. In a tube shorter than h, the liquid does not overflow; the surface just becomes flatter (larger radius of curvature).
“Water rises in a capillary because the tube sucks it up.” Nothing sucks. The surface tension along the edge of the curved surface pulls the liquid up, and it stops when the weight of the column balances that pull. That is why h ∝ 1/r.
Merging drops (JEE). n small drops of radius r join into one big drop of radius . Surface area falls, so energy is released as heat.
- P = P₀ + ρgh, independent of vessel shape; Pascal: pressure passes unchanged; hydraulic lift F₂ = F₁A₂/A₁.
- Buoyancy = weight of fluid displaced; floating fraction under = ρ_body/ρ_fluid.
- Accelerating container: tan θ = a/g; spinning liquid: y = ω²r²/2g.
- Continuity A₁v₁ = A₂v₂; Bernoulli P + ½ρv² + ρgh = constant; Torricelli v = √(2gh).
- Viscous force ηA dv/dy; Stokes 6πηrv; terminal speed 2r²(ρ − σ)g/9η; Poiseuille Q ∝ r⁴.
- Surface tension = force per length = energy per area; drop 2T/r, soap bubble 4T/r.
- Capillary rise h = 2T cos θ/(ρgr); mercury falls.
Check yourself
Sources
- National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Mechanical properties of fluids
- Surface tension of water at 20 °C ≈ 0.0728 N/m and viscosity data: CRC Handbook of Chemistry and Physics, rounded as exams use them
- Standard atmosphere 101 325 Pa (exact by definition), BIPM SI Brochure, 9th edition https://www.bipm.org/en/publications/si-brochure
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.