Module 18: Electric potential and capacitors · Lesson 18.1 · about 34 min
Electric potential and capacitors
Potential and potential energy of charges, potential of shells, spheres and rings, equipotentials and E = −dV/dr, conductors, capacitance, series and parallel combinations, dielectrics and slabs, energy stored and lost on sharing, and RC charging, up to JEE Advanced level.
Physics · Class 12 · about 34 minutes. By the end you will be able to find the potential of any set of charges, move between E and V, and solve capacitor circuits with dielectrics, charge sharing, energy and RC timing.
1. Potential and potential energy
The potential at a point is the work done per unit charge to bring a small positive charge from infinity to that point, slowly: , in volts (J/C). For a point charge, , with sign. Potential is a scalar: for many charges just add the numbers, no angles.
- Potential energy of two charges: . For a group, add over every pair once.
- Work by an outside agent to move q from A to B: . Work does not depend on the path.
- Electron volt: an electron moved through 1 V gains 1 eV = 1.6 × 10⁻¹⁹ J.
“Where the field is zero, the potential is zero.” No. Midway between two equal positive charges, E = 0 but V = 2kq/(d/2), not zero. Field is the slope of V, not V itself. The reverse also holds: midway between +q and −q, V = 0 but E is not.
2. Potential of charged bodies
| Body | Potential |
|---|---|
| Ring (charge Q, radius R), on axis at x | ; at the centre kQ/R |
| Thin shell or conducting sphere | kQ/r outside; kQ/R everywhere inside |
| Solid sphere, uniform charge | inside; at the centre 1.5 × surface value |
| Dipole at distance r, angle θ | ; zero on the equatorial line |
3. Field from potential, equipotentials
The field is the negative slope of the potential: , or in components . In a uniform field, .
Equipotential surfaces join points at the same potential. They are always perpendicular to field lines, and no work is done moving a charge along one. Around a point charge they are spheres; in a uniform field they are flat planes. A conductor’s whole surface (and inside) is one equipotential.
When two charged spheres are joined by a wire, charge flows until their potentials match: , so . The smaller sphere has the larger surface density. That is why charge crowds at sharp points and leaks away there (corona discharge, lightning conductors).
4. Capacitance
A capacitor is two conductors with equal and opposite charge. Its capacitance (farad) depends only on shape, size and the material between.
- A
- area of one plate (m²)
- d
- gap between the plates (m)
- a, b
- inner and outer radii of spherical or cylindrical conductors
- K
- dielectric constant of a filling material; filling the whole gap multiplies C by K
- Physical meaning
- A bigger area holds more charge for the same voltage; a smaller gap makes each charge pull harder on its partner, so less voltage is needed for the same charge.
Combinations. Parallel: (same V, charges add). Series: (same Q, voltages add). For two in series, , and the smaller capacitor takes the larger voltage.
5. Dielectrics and slabs
A dielectric’s molecules polarise and set up a small opposite field inside it, cutting the field to E/K. A slab of thickness t and constant K in a gap d acts like an air gap of only t/K:
A metal slab is the case K → ∞: . Try it here, and compare battery connected with battery removed.
| Change | Battery connected (V fixed) | Battery removed (Q fixed) |
|---|---|---|
| Insert dielectric K | C, Q, U all × K; E same | C × K; V, E, U ÷ K |
| Double the gap | C ÷ 2, Q ÷ 2, U ÷ 2, E ÷ 2 | C ÷ 2, V × 2, U × 2, E same |
A slab partly across the plate area (side by side) makes parallel capacitors; a slab partly through the gap (layered) makes series capacitors.
6. Energy stored, energy lost
The energy lives in the field between the plates. The plates attract each other with , half of QE, because each plate feels only the other plate’s field.
Charge sharing. Join a capacitor C₁ at V₁ to C₂ at V₂. Charge is conserved, the common voltage is , and energy is always lost:
“A battery that charges a capacitor stores all its work in it.” The battery does work QV, but only ½QV ends up in the capacitor. The other half is lost as heat in the wires, however small their resistance.
7. Charging and discharging through a resistor
With a resistor R in series, charge does not appear at once. Charging: , current . Discharging: . The time constant τ = RC is the time to reach 63% of the final charge (or fall to 37%). After about 5τ the job is done. In a DC circuit after a long time, a capacitor carries no current, so treat it as a gap.
Worked example (level 4). A 2 µF capacitor at 100 V is connected across an uncharged 3 µF capacitor. Common voltage = 200/5 = 40 V. Loss = (2 × 3)/(2 × 5) × 100² µJ = 6000 µJ = 6 mJ. Check: before ½ × 2 × 10⁴ = 10 mJ; after ½ × 5 × 1600 = 4 mJ. ✓
- V = kq/r (scalar, add with signs); U = kq₁q₂/r for each pair; W = q ΔV, path does not matter.
- E = −dV/dr; equipotentials are perpendicular to field lines; a conductor is one equipotential.
- Shell: kQ/R inside; solid sphere centre 1.5 kQ/R; ring axis kQ/√(R² + x²).
- C = ε₀A/d; sphere 4πε₀R; parallel adds C, series adds 1/C.
- Slab: C = ε₀A/(d − t + t/K); metal slab K → ∞.
- Battery on: V fixed. Battery off: Q fixed. Work out every change from that.
- U = Q²/2C = ½CV²; sharing loses C₁C₂(V₁ − V₂)²/[2(C₁ + C₂)]; plate force Q²/(2ε₀A).
- RC: q = CV(1 − e^(−t/RC)), τ = RC.
Check yourself
Sources
- National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Electrostatic potential and capacitance
- Vacuum electric permittivity ε₀ = 8.854 187 8188 × 10⁻¹² F/m, CODATA 2022 via NIST https://physics.nist.gov/cuu/Constants/
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.