Module 11: Fluids: pressure, flow, viscosity and surface tension · Lesson 11.2 · about 28 min
Fluids: question types and traps
Every way entrance exams ask about fluids: pressure and U-tubes, hydraulic machines, buoyancy and floating, accelerating and rotating containers, continuity and Bernoulli, efflux and range, viscosity and terminal speed, Poiseuille, bubbles and drops, and capillary rise, each with a method and its trap.
Physics · Class 11 · about 28 minutes. Read the lesson Fluids first. Here you meet every question type, with a worked example and the trap, then practise.
The ten question types
Worked examples
Example 1 (level 3, two liquids). A U-tube holds mercury (13.6 g/cm³). 13.6 cm of water is poured into one arm. How much higher does the water surface stand than the mercury surface in the other arm?
Solution. At the level of the water-mercury interface: , so the mercury in the other arm stands h = 1 cm above that interface. The water surface is 13.6 cm above it, so the difference is 12.6 cm.
Example 2 (level 4, emptying a tank). A tank of area A has water to height H and a small hole of area a at the bottom. How long does it take to empty?
Solution. . Separate and integrate from H to 0: . Half the time empties three-quarters of the tank, because the flow is fastest at the start.
Example 3 (level 4, rotating liquid). A cylinder of radius 10 cm holds water and spins about its axis at 10 rad/s. How much higher is the water at the rim than at the centre? (g = 10 m/s²)
Solution. = 5 cm.
Example 4 (level 5, merging drops). 1000 tiny water drops, each of radius 0.01 mm, combine into one drop. Find the energy released. (T = 0.07 N/m)
Solution. R = 1000^(1/3) × 0.01 mm = 0.1 mm. Area change = m². Energy = T × ΔA ≈ 7.9 × 10⁻⁸ J.
“Bernoulli’s equation works for any flow.” Only for steady, streamline flow of an incompressible, non-viscous fluid, along a streamline. Viscous flow in a long pipe loses pressure along the pipe even when it is level and its speed is constant.
- Same-level rule
- equal pressures only at equal levels in one connected, still body of the same liquid
- Flow resistance
- 8ηL/(πr⁴): pipes in series add, in parallel combine like parallel resistors
- Physical meaning
- Surface tension always tries to shrink a surface; a curved surface can only stay curved if the pressure on its inner side is higher.
Practise
The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.
- Ten types: U-tubes, hydraulics, floating, buoyancy with acceleration, tilted and spinning surfaces, Bernoulli, efflux, terminal speed, Poiseuille, surface tension.
- U-tube: equate pressures at the lower interface level.
- Tank empties in (A/a)√(2H/g); half the time empties three-quarters.
- Spinning liquid rises ω²R²/2g at the rim.
- Merging drops release T × (loss of area) as heat.
Check yourself
Sources
- JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Mechanical properties of fluids; question patterns studied from the exams' published papers (no questions copied)
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.