All lessons

Module 8: Rotational motion · Lesson 8.1 · about 38 min

Rotational motion

Torque, couples and equilibrium, moment of inertia with the parallel and perpendicular axis theorems, rotational kinematics, torque and angular acceleration, angular momentum and its conservation, rotational energy, rolling without slipping and rolling with friction.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 38 minutes. By the end you will be able to find torques and moments of inertia, use τ = Iα and angular momentum conservation, and solve rolling problems, including rolling races, slipping balls and rods that fall.

Rotation copies straight-line motion term for term. Force becomes torque, mass becomes moment of inertia, momentum becomes angular momentum. The only new idea is that in rotation it matters where the mass is and where the force is applied, not just how much.

1. Torque and equilibrium

The turning effect of a force F about a point O is the torque:

τ→=r→×F→,τ=rFsin⁡θ=F×(perpendicular distance from O to the line of the force)

That perpendicular distance is the moment arm. A force whose line passes through O has no torque about O. A couple is two equal and opposite forces not on the same line; it has zero net force but a torque F × (distance between the lines), the same about every point.

Equilibrium of a rigid body needs both: net force = 0 and net torque = 0 about any point. Choose the point through which the most unknown forces pass, so they drop out.

“A heavier force always turns a body more.” Torque depends on the moment arm too. A small force at the end of a long spanner beats a big force near the nut. A force along the spanner, however big, gives no torque at all.

2. Moment of inertia

Moment of inertia measures how hard a body is to spin up: I=∑mr2=∫r2dm, where r is the distance from the axis. It depends on the axis chosen. Writing I=Mk2 defines the radius of gyration k.

Body (mass M) Axis I
Thin rod, length L through the middle, perpendicular ML2/12
Thin rod, length L through an end, perpendicular ML2/3
Ring, radius R through the centre, perpendicular to plane MR2
Disc or solid cylinder through the centre, along the axis MR2/2
Hollow sphere diameter 2MR2/3
Solid sphere diameter 2MR2/5
Rectangular plate a × b through the centre, perpendicular M(a2+b2)/12
  • Parallel axis theorem: I=Icm+Md2, for an axis parallel to one through the centre of mass at distance d. It shows I is least about an axis through the centre of mass.
  • Perpendicular axis theorem (flat bodies only): Iz=Ix+Iy, where x and y lie in the plate and z is perpendicular to it through the same point. A ring about a diameter: MR²/2; a disc about a diameter: MR²/4.

3. The rotation dictionary

Straight line Rotation Link
x, v, a θ, ω, α s = rθ, v = rω, a_t = rα
m I I=∑mr2
F = ma τ=Iα about a fixed axis or the centre of mass
p = mv L=Iω L→=r→×p→
K = ½mv² K=12Iω2
P = Fv P=τω
W = ∫F dx W=∫τdθ

With constant α, the equations of motion carry over: ω=ω0+αt, θ=ω0t+12αt2, ω2=ω02+2αθ.

Block hanging from a pulley (pulley mass M, radius R, a disc): a=mgm+M/2. The pulley’s inertia acts like extra mass I/R² that must be speeded up too.

4. Angular momentum and its conservation

τext=dLdt. If the outside torque about an axis is zero, angular momentum about that axis is conserved: I1ω1=I2ω2.

  • A skater pulls in her arms: I falls, ω rises. Kinetic energy L2/2I rises, paid for by her muscles.
  • Clay dropped on a turntable, a person walking to the centre of a rotating platform, two discs pressed together: the same rule. When two spinning bodies are made to rotate together, kinetic energy is lost (friction between them makes heat).

Angular momentum of a particle moving in a straight line about a point O: L=mvd, where d is the perpendicular distance from O to the line. It stays constant, even though the particle is not going round anything.

5. Rolling without slipping

A body rolling without slipping has vcm=Rω. Its motion is translation of the centre plus spin about the centre. The bottom point is momentarily at rest, the top moves at 2v.

K=12mv2+12Iω2=12mv2(1+k2R2),a=gsin⁡θ1+k2/R2 (down a slope)
I
moment of inertia about the axis, in kg m²
k
radius of gyration: I = Mk²; for a sphere k²/R² = 2/5, disc 1/2, hollow sphere 2/3, ring 1
τ
torque, rF sin θ, in N m
L
angular momentum, Iω, in kg m²/s
Physical meaning
A rolling body must spend part of its energy on spinning. The more of its mass sits far from the axis (bigger k²/R²), the more it spends and the slower it speeds up.

Race them below. Mass and radius do not matter; only the shape does.

Rolling race down one slope. The solid sphere always wins and the ring always comes last. The bars show the share of kinetic energy in moving forward and in spinning.

Friction in rolling. On a slope, static friction acts up the slope with size f=mgsin⁡θ1+R2/k2. It does no work (the contact point does not slide), so mechanical energy is conserved. To roll without slipping you need μ≥tan⁡θ1+R2/k2; for a solid cylinder that is tan θ/3.

“Friction always slows a rolling ball down.” On a level floor, a ball rolling perfectly needs no friction at all. On a slope, friction is what makes it spin up; it does no work, so no energy is lost to it.

6. Rolling with slipping and falling rods (JEE Advanced)

A ball thrown sliding with speed v₀ and no spin on a rough floor: kinetic friction slows the centre and spins the ball up until v=Rω. Angular momentum about the contact point is kept (friction passes through it), so the final speed is v=v01+k2/R2: 5v₀/7 for a solid sphere.

A rod of length L hinged at one end, released from horizontal. Energy: mgL2=12⋅mL23ω2 at the bottom, so ω=3g/L. Just after release, τ=Iα gives α=3g/2L, so the free end starts falling at 32g, faster than a dropped stone.

  • τ = r × F = F × moment arm; equilibrium: net force and net torque zero.
  • I = Σmr²; rod ML²/12 (centre), ML²/3 (end); ring MR²; disc MR²/2; spheres 2/3 and 2/5 MR².
  • Parallel axis I = I_cm + Md²; perpendicular axis (plates) I_z = I_x + I_y.
  • τ = Iα, L = Iω, K = ½Iω², P = τω.
  • No outside torque: I₁ω₁ = I₂ω₂; joining spinning bodies loses kinetic energy.
  • Rolling: v = Rω, K = ½mv²(1 + k²/R²), a = g sin θ/(1 + k²/R²); sphere beats disc beats hollow sphere beats ring.
  • Sliding ball settles to v₀/(1 + k²/R²); hinged rod: ω = √(3g/L) at the bottom, α = 3g/2L at the start.

Check yourself

1A solid sphere and a ring of the same mass and radius roll down the same slope from rest. Which reaches the bottom first?
2A skater spinning with arms out pulls her arms in. Her angular speed:
3For a body rolling without slipping on the ground, the point in contact with the ground has velocity:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Rotational motion

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.