All lessons

Module 51: Metals and metallurgy · Lesson 51.2 · about 22 min

Metals and metallurgy: question types and traps

Every way KEAM, CUSAT, COMEDK and JEE ask about metallurgy: match the ore, concentration method, calcination or roasting, Ellingham diagram reading, blast furnace zones, copper and aluminium extraction, refining methods, and Faraday or yield calculations, each with a method and its trap. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 12 · about 22 minutes. Read Metals and metallurgy first. Here are the question types, worked examples and practice.

Metallurgy questions are mostly matching: which ore, which method, which reagent, which metal. Learn the reason behind each match (sulphides float, carbon gets better when hot, noble metals fall as mud) and the matches stop needing memory. The numerical ones are Faraday's law and percentage composition.

The question types

1. Ores and composition. Match the ore to the metal and formula. Trap: iron pyrites (FeS₂) is not an iron ore; calamine is ZnCO₃; malachite is a copper carbonate.
2. Concentration. Gravity, magnetic, froth flotation, leaching. Trap: collectors, frothers and depressants are three different roles.
3. Calcination vs roasting. Trap: roasting needs air and gives SO₂; calcination gives CO₂ or water.
4. Ellingham reading. Lower line reduces higher oxide; crossing points; slopes from ΔS. Trap: CO is the better reducer below about 980 K, C above it.
5. Blast furnace. Zones, flux, slag, kinds of iron. Trap: limestone is the flux, CaO the actual slag-former; SiO₂ is the gangue.
6. Copper and zinc. Matte, converter, self-reduction, blister copper; zinc distilled. Trap: FeS is removed as FeSiO₃ slag.
7. Aluminium. Bayer (leaching), Hall-Héroult (electrolysis). Trap: the anode is consumed as CO₂.
8. Refining and calculations. Match method to metal; Faraday's law; mass of metal from ore. Trap: current efficiency below 100% reduces the useful charge.

Worked examples

Example 1 (level 3, Ellingham reading). At 1000 K, ΔG° per mol O₂ is about −490 kJ for 2Zn + O₂ → 2ZnO and −400 kJ for 2C + O₂ → 2CO. Can carbon reduce ZnO at 1000 K? Solution. ZnO + C → Zn + CO has ΔG° = ½(−400 − (−490)) = +45 kJ per mol ZnO, positive: no. The carbon line must pass below the zinc line, which happens near 1250 K, which is why zinc is smelted above about 1400 K.

Example 2 (level 3, aluminium). How long must 50 000 A flow to make 1 tonne of aluminium at 90% efficiency? Solution. 10⁶ g / 27 = 37 037 mol Al, needing 111 111 mol e⁻ = 1.072 × 10¹⁰ C. Useful current 45 000 A: t = 2.38 × 10⁵ s = 66 hours.

Example 3 (level 4, copper matte). A matte has 60% Cu₂S and 40% FeS by mass. How much SiO₂ is needed per 100 kg to slag all the iron (as FeSiO₃) after the FeS is roasted to FeO? Solution. FeS = 40 kg / 88 = 0.4545 kmol, giving 0.4545 kmol FeO, needing 0.4545 kmol SiO₂ = 27.3 kg.

Example 4 (level 4, refining). Match: (a) Ni (b) Zr (c) Ge (d) Cu with Mond, van Arkel, zone refining, electrolytic. Solution. a-Mond, b-van Arkel, c-zone refining, d-electrolytic. Reasons: Ni forms a volatile carbonyl; Zr forms a volatile iodide; impurities in Ge prefer the melt; copper anodes dissolve and pure copper plates out.

“Since carbon reduces most oxides at high temperature, it is used for every metal.” Carbon reduces Al₂O₃ and MgO only at temperatures that are not practical, and it forms carbides with many metals (Al₄C₃, TiC). Electrolysis or a reactive metal is used instead.

Coupled reaction
MO + R → M + RO, with ΔG° = ΔG°(R → RO) − ΔG°(M → MO), per mole of O₂ halved as needed
Current efficiency
useful charge ÷ total charge
Physical meaning
Oxygen goes to whichever element holds it more tightly at that temperature.

Practise

  • Learn ore formulas for Al, Fe, Cu, Zn, Pb; iron pyrites is not used for iron.
  • Sulphides: froth flotation, then roasting; carbonates and hydrates: calcination.
  • Ellingham: lower line wins; crossing gives the minimum temperature.
  • Blast furnace: CO reduces at the top; CaO + SiO₂ → CaSiO₃.
  • Copper: matte → converter → self-reduction → blister → electrorefining.
  • Al: Bayer leaching then electrolysis in cryolite; anodes burn.
  • Refining: Mond (Ni), van Arkel (Zr, Ti), zone (Si, Ge, Ga), electrolytic (Cu) with anode mud.

Check yourself

1In the blast furnace, the main reducing agent for Fe₂O₃ in the upper, cooler part is:
2Cryolite is added in the electrolysis of alumina to:
3Self-reduction is the key step in extracting:

Sources

  • JEE Main and JEE Advanced 2026 syllabi; KEAM, CUSAT CAT and COMEDK chemistry syllabi; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.