All lessons

Module 41: s-block elements and hydrogen · Lesson 41.2 · about 24 min

s-block elements and hydrogen: question types and traps

Every way JEE asks about the s-block and hydrogen: trends, reactions with air and water, liquid ammonia solutions, anomalous Li and Be, thermal stability and solubility orders, flame colours, Solvay process, hydrated salts, hydrides and hydrogen peroxide calculations, each with a method and its trap. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 24 minutes. Read s-block elements and hydrogen first. Here are the question types, worked examples and practice.

s-block questions are mostly orders and reactions. For orders, ask whether size helps or hurts the property. For reactions, remember the few products that break the pattern: Li₂O and Li₃N, Na₂O₂, KO₂, Mg₃N₂ and the compounds that will not decompose.

The question types

1. Periodic trends. Radius, IE, hydration, E°, melting point. Trap: Li has the most negative E° in group 1 though it reacts most gently.
2. Reaction with air and water. Oxide, peroxide, superoxide; nitride for Li and Mg. Trap: Be does not react with water; Mg needs hot water.
3. Liquid ammonia solutions. Blue, conducting, paramagnetic; concentrated bronze and diamagnetic. Trap: the colour is from ammoniated electrons, not the metal ion.
4. Anomalous Li and Be, diagonal pairs. Li-Mg, Be-Al. Trap: LiF and Li₂CO₃ are sparingly soluble, like MgF₂ and MgCO₃.
5. Thermal stability. Carbonates, nitrates rise down. Trap: Na₂CO₃ does not decompose; NaHCO₃ does.
6. Solubility. Group 2 sulfates fall, hydroxides rise. Group 1 fluorides rise down the group. Trap: do not mix up the two group 2 orders.
7. Flame colours and uses. Li crimson, Na yellow, K lilac, Ca brick red, Sr crimson, Ba apple green. Trap: Be and Mg give no colour.
8. Industrial compounds. Solvay, chlor-alkali, plaster of Paris, cement. Trap: Solvay fails for K₂CO₃.
9. Stoichiometry. Gas volumes from carbonates, hydrides and metals with water. Trap: 2NaHCO₃ gives one CO₂; CaH₂ gives two H₂.
10. Hydrogen and H₂O₂. Isotopes, hydride types, hardness, volume strength = 11.2 M. Trap: "20 volume" means about 1.79 M, not 20 M.

Worked examples

Example 1 (level 3, hydride with water). What volume of H₂ at STP forms when 4.2 g of CaH₂ reacts with water? Solution. CaH₂ + 2H₂O → Ca(OH)₂ + 2H₂. Moles CaH₂ = 4.2/42 = 0.1; H₂ = 0.2 mol = 4.48 L.

Example 2 (level 4, mixture of carbonates). 1.84 g of a mixture of CaCO₃ and MgCO₃ is heated to constant mass, leaving 0.96 g of residue. Find the mass of CaCO₃. Solution. Let x g CaCO₃ and (1.84 − x) g MgCO₃. Residue: 56x/100 + 40(1.84 − x)/84 = 0.96. 0.56x + 0.8762 − 0.4762x = 0.96, so 0.0838x = 0.0838 and x = 1.00 g.

Example 3 (level 4, Solvay balance). How much NH₄Cl forms with every tonne of NaHCO₃ in the Solvay tower, and why is it not wasted? Solution. 1 : 1 by moles: 1 t NaHCO₃ (84) goes with 53.5/84 = 0.64 t NH₄Cl. It is heated with Ca(OH)₂ to give back NH₃ (2NH₄Cl + Ca(OH)₂ → 2NH₃ + CaCl₂ + 2H₂O), so only CaCl₂ is left as waste.

Example 4 (level 5, solubility reasoning). Explain why the solubility of group 2 sulfates falls down the group but that of hydroxides rises. Solution. Solubility depends on hydration energy (helps) against lattice energy (hurts). For sulfates the large SO₄²⁻ makes the lattice energy almost the same for every cation, while hydration energy falls steeply as the cation grows: solubility falls. For hydroxides the small OH⁻ makes the lattice energy fall faster than the hydration energy as the cation grows: solubility rises.

“All alkali metal carbonates give CO₂ on heating, like limestone.” Only Li₂CO₃ does among group 1 carbonates. Na⁺ and K⁺ are too large to pull the carbonate ion apart at ordinary temperatures. A heating question with Na₂CO₃ gives no gas at all.

Polarising power
how strongly a cation distorts an anion; grows with charge and shrinks with size
Physical meaning
Small, highly charged cations break up large anions (carbonate, nitrate) and grip water strongly, which sets every stability and solubility order in this block.

Practise

  • Air products: Li₂O + Li₃N, Na₂O₂, KO₂; Mg gives MgO + Mg₃N₂.
  • Stability of carbonates and nitrates rises down both groups; only Li₂CO₃ decomposes in group 1.
  • Group 2 sulfates: solubility falls; hydroxides: solubility rises.
  • Diagonal pairs Li-Mg, Be-Al; Be compounds amphoteric and covalent.
  • CaH₂ + 2H₂O → 2H₂; 2NaHCO₃ → 1 CO₂.
  • Volume strength of H₂O₂ = 11.2 × molarity.

Check yourself

1The correct order of thermal stability of the carbonates is:
2Which pair of compounds is formed when Mg burns in air?
3Dead burnt plaster is:

Sources

  • JEE Main and JEE Advanced 2026 syllabi: s-block elements and hydrogen; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.