Module 80: Three-dimensional geometry · Lesson 80.1 · about 38 min
Three-dimensional geometry
Coordinates and distance in space, direction cosines and ratios, the equation of a line in vector and symmetric form, angle between lines, intersecting and skew lines with the shortest distance, every form of the plane equation, angles and distances involving planes, the family of planes through a line, foot of the perpendicular, images in a plane or a line, and coplanarity.
Maths · Class 12 · about 38 minutes. By the end you will be able to write lines and planes in every form, find angles and distances between them, compute the shortest distance between skew lines, find feet of perpendiculars and images, and use the family of planes through a line.
1. Points, distance and direction
The distance between (x₁, y₁, z₁) and (x₂, y₂, z₂) is . The section formula works coordinate by coordinate, as in two dimensions.
Direction cosines l, m, n of a line are the cosines of the angles it makes with the x, y, z axes; always l² + m² + n² = 1. Direction ratios a, b, c are any numbers in proportion to them: for the segment from P to Q they are the coordinate differences. To turn ratios into cosines, divide by √(a² + b² + c²).
Projection of a segment PQ on a line with direction cosines l, m, n: |l(x₂ − x₁) + m(y₂ − y₁) + n(z₂ − z₁)|.
2. The line
Through the point A (position a) with direction b:
- a, (x₁, y₁, z₁)
- any one point on the line
- b, (b₁, b₂, b₃)
- direction ratios of the line; a zero in a denominator just means that coordinate stays constant
- λ
- a parameter: each value gives one point; set each fraction equal to λ to get a general point (x₁ + λb₁, y₁ + λb₂, z₁ + λb₃)
- Physical meaning
- Start at a point and walk in a fixed direction; λ says how far you walked.
The angle between two lines is the angle between their directions: . They are perpendicular when b₁ · b₂ = 0 and parallel when b₁ and b₂ are proportional.
Do two lines meet? Write a general point on each, equate the coordinates, solve two of the equations for λ and μ, and check the third. If it fails, the lines are skew (not parallel and not meeting).
3. Shortest distance between lines
b₁ × b₂ is the direction of the common perpendicular; d is the projection of the joining vector a₂ − a₁ onto it. The lines meet exactly when d = 0, that is when (a₂ − a₁) · (b₁ × b₂) = 0, which is also the coplanarity condition for two lines.
4. The plane
| Given | Equation |
|---|---|
| normal n = (a, b, c) and a point (x₁, y₁, z₁) | a(x − x₁) + b(y − y₁) + c(z − z₁) = 0 |
| general form | ax + by + cz + d = 0, normal (a, b, c) |
| intercepts p, q, r on the axes | x/p + y/q + z/r = 1 |
| normal form: unit normal (l, m, n), distance p from origin | lx + my + nz = p |
| three points A, B, C | normal = AB × AC, or a 3 × 3 determinant = 0 |
| containing a line and a point, or two lines | normal = cross product of two directions in the plane |
Angle between planes = angle between normals: . Angle between a line and a plane uses the sine, since the line is measured from the plane, not from the normal: .
“The angle between a line and a plane is found with cos, like two lines.” Using cos with the normal gives the angle between the line and the normal, which is 90° minus the answer. A line lying in the plane is perpendicular to the normal, so b · n = 0 gives φ = 0 with the sine formula.
5. Distances involving planes
For the parallel-plane formula, first make the x, y, z coefficients identical in both equations. A line is parallel to a plane when b · n = 0, and then its distance from the plane is the distance of any one of its points.
6. Foot of the perpendicular and images
In a plane. From P(x₁, y₁, z₁) to ax + by + cz + d = 0, the foot F and the image P′ are
The image is twice as far along the normal as the foot, because the plane bisects PP′.
In a line. Write the general point Q = a + λb, make PQ perpendicular to b (PQ · b = 0) to find λ: that Q is the foot. The image is 2Q − P. The distance from the point to the line is |PQ|.
7. JEE Advanced level: family of planes and lines as intersections
- Family of planes through a line. Any plane through the line where P₁ = 0 and P₂ = 0 meet is P₁ + kP₂ = 0. One more condition (passes through a point, parallel to a line, perpendicular to a plane) fixes k.
- Line of intersection of two planes. Its direction is n₁ × n₂; for a point, put z = 0 (or any convenient value) and solve the two equations.
- Coplanar lines. Two lines are coplanar when (a₂ − a₁) · (b₁ × b₂) = 0; the plane containing them has normal b₁ × b₂.
- Planes equidistant or bisecting. The planes bisecting the angles between two planes are (a₁x + b₁y + c₁z + d₁)/|n₁| = ±(a₂x + b₂y + c₂z + d₂)/|n₂|.
Next: Three-dimensional geometry: question types and traps.
- Direction cosines: divide direction ratios by their length; l² + m² + n² = 1.
- Line: r = a + λb, or (x − x₁)/b₁ = (y − y₁)/b₂ = (z − z₁)/b₃; use the general point.
- Skew lines: d = |(a₂ − a₁) · (b₁ × b₂)|/|b₁ × b₂|; d = 0 means they meet.
- Plane: a(x − x₁) + b(y − y₁) + c(z − z₁) = 0 with normal (a, b, c); intercept form x/p + y/q + z/r = 1.
- Angle between planes uses cos with normals; line and plane uses sin.
- Point to plane |ax₁ + by₁ + cz₁ + d|/√(a² + b² + c²); image goes twice as far as the foot.
- Planes through the meeting line of P₁ = 0 and P₂ = 0: P₁ + kP₂ = 0.
Check yourself
Sources
- NCERT Mathematics Class 11 (Introduction to three-dimensional geometry) and Class 12 (Three dimensional geometry): topics followed, no text copied
- JEE Main and JEE Advanced 2026 syllabi: Three dimensional geometry
Your ticks stay in this browser. Save them as a file on the course home.
Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.