All lessons

Module 2: Units, dimensions and errors · Lesson 2.2 · about 25 min

Units, dimensions and errors: question types and traps

Every way entrance exams ask about units, dimensions and errors, from same-dimension pairs to finding the dimensions of constants in strange formulae, error propagation and vernier readings, each with a worked method and the trap it sets. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 25 minutes. Read the lesson Units, dimensions and errors first. Here you meet every question type, with a worked example and the trap, then practise from the bank.

Almost every question in this chapter is one of eight types. Learn the method for each, and the chapter becomes some of the fastest marks in the paper.

The eight question types

1. Same or different dimensions. "Which pair has the same dimensions?" Method: reduce each to [M L T A] using a defining formula. Trap: look-alike pairs: moment of inertia [ML²] vs torque [ML²T⁻²], surface tension [MT⁻²] vs surface energy per area (same!), stress vs strain (strain is dimensionless).
2. Dimensions of a constant in a formula. "In P = a/b · e^(−bx/kT) find [a]." Method: exponents, angles and logs are dimensionless; added terms have equal dimensions. Fix the constants from the inside out.
3. Check or choose a formula. "Which could be the speed of a wave on a string?" Method: test each option's dimensions. Trap: two options may pass; the question then needs physics (a heavier string carries slower waves).
4. Derive a relation. "If time depends on G, h and c, find the expression." Method: T = k G^a h^b c^c, match powers of M, L, T. Gives Planck time ∝ √(Gh/c⁵).
5. New system of units. "If force, length and time are the base units, what are the dimensions of mass?" or "the unit of energy becomes ...". Method: write the old base quantities in terms of the new ones and substitute.
6. Significant figures and rounding. Method: least significant figures for × and ÷, least decimal places for + and −. Trap: trailing zeros without a decimal point.
7. Error propagation. Method: powers multiply percentage errors; everything adds. Trap: square roots halve the error; subtraction still adds absolute errors; a constant (π, 4) has no error.
8. Instrument readings. Vernier, screw gauge, least count, zero error, and "which instrument gives the least error". Trap: the sign of the zero error; counting circular divisions below the line.

Worked examples

Example 1 (level 2, same dimensions). Which has the same dimensions as 12ε0E2 (ε₀ permittivity, E electric field)? (a) force (b) pressure (c) power (d) momentum.

Solution. 12ε0E2 is the energy stored per unit volume of an electric field, and energy/volume = [ML2T−2]/[L3]=[ML−1T−2], the dimensions of pressure. Answer (b). Trap: trying to multiply out ε₀ and E from scratch wastes a minute; recognise energy density.

Example 2 (level 3, constants in a formula). The van der Waals equation is (P+aV2)(V−b)=RT. Find the dimensions of a/b.

Solution. b is subtracted from V, so [b]=[L3]. a/V2 is added to P, so [a]=[P][V2]=[ML−1T−2][L6]=[ML5T−2]. Then [a/b]=[ML2T−2], the dimensions of energy. Answer: [ML²T⁻²].

Example 3 (level 3, assertion-reason). A: A dimensionally correct equation is always physically correct. R: Dimensional analysis cannot find dimensionless constants.

Solution. A is false (s=ut+at2 is dimensionally correct but wrong; the ½ is missing). R is true. Answer: A false, R true.

Example 4 (level 4, new units). If the speed of light c, the Planck constant h and the gravitational constant G are taken as base units, what are the dimensions of mass?

Solution. Let M=cxhyGz. Dimensions: [LT−1]x[ML2T−1]y[M−1L3T−2]z. M: y − z = 1. L: x + 2y + 3z = 0. T: −x − y − 2z = 0. Solving: y = z + 1, then x = −y − 2z = −3z − 1, and L gives −3z − 1 + 2z + 2 + 3z = 0, so z = −½, y = ½, x = ½. Mass ∝ √(ch/G), the Planck mass.

Example 5 (level 3, errors with a square root). The period of a pendulum is T=2πL/g. L has 2% error and g is known exactly. What is the error in T?

Solution. T∝L1/2, so the error is ½ × 2% = 1%. Trap: answering 2% or 4%.

Example 6 (level 4, screw gauge with zero error). A screw gauge has pitch 0.5 mm and 50 circular divisions. With the jaws closed, the 3rd division is on the reference line, with the circular zero below the line. A wire reads 2 main-scale divisions (of 0.5 mm) and 27 circular divisions. Find the diameter.

Solution. Least count = 0.5/50 = 0.01 mm. Zero error is positive: +3 × 0.01 = +0.03 mm. Reading = 2 × 0.5 + 27 × 0.01 = 1.27 mm. Diameter = 1.27 − 0.03 = 1.24 mm. Trap: adding the zero error instead of subtracting it.

“If the units on both sides match, I can stop checking.” Matching dimensions only rules wrong formulae out; it never rules a formula in. When two options pass, use a limiting case: what happens if a mass is zero, an angle is 90°, or a length is very large?

Inside-out rule
first make exponents, sines and logs dimensionless, then match the terms that are added
Error rule
percentage error of A^p B^q / C^r = p(%A) + q(%B) + r(%C)
Physical meaning
Units are a built-in check that nature gives you for free; every question in this chapter is a way of using that check.

Practise

The set below starts at level 1 and climbs to level 5. It includes every format: single answer, multi-correct, numerical, assertion-reason, statements, matching lists and passages. Number questions marked as templates give new values each time you press “New numbers”.

  • Eight types: same dimensions, constants in a formula, checking formulae, deriving relations, new unit systems, significant figures, error propagation, instrument readings.
  • Work inside-out: exponents and logs are dimensionless; added terms share dimensions.
  • Dimensional correctness is necessary, never sufficient.
  • Powers multiply percentage errors; square roots halve them; everything adds.
  • Zero error: positive when the circular zero is below the line; subtract it from the reading.

Check yourself

1In v = at + b/(t + c), v is a velocity and t a time. The dimensions of b are:
2Which pair has different dimensions?
3A cube's side is measured with 2% error. The maximum error in its volume is:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Units and measurements; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.