All lessons

Module 3: Motion in a straight line · Lesson 3.1 · about 32 min

Motion in a straight line

Displacement, velocity and acceleration, reading x-t and v-t graphs, the equations of uniformly accelerated motion, free fall, the distance in the nth second, relative velocity, and motion with changing acceleration using calculus.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 32 minutes. By the end you will be able to describe any straight-line motion with graphs and equations, solve free-fall and chase problems, and handle acceleration that changes with time, position or speed.

Velocity is how fast position changes, and acceleration is how fast velocity changes. On graphs, a slope gives the next quantity down the chain and an area gives the one before it. Everything in this chapter follows from that one picture.

1. Position, displacement, distance

Choose an origin and a positive direction; write them down before every problem. Position x is where the body is. Displacement is the change in position, Δx=x2−x1, and can be negative. Distance is the total path length, never negative and never less than the size of the displacement.

  • Average velocity = displacement / time. Average speed = distance / time.
  • Instantaneous velocity v=dxdt, the slope of the x-t graph at that instant.
  • Acceleration a=dvdt=d2xdt2, the slope of the v-t graph.

“Negative acceleration means slowing down.” Not always. Slowing down happens when velocity and acceleration point in opposite directions. A body moving in the negative direction with negative acceleration is speeding up. Always compare the signs of v and a.

2. One motion, three graphs

Watch a motion drawn three ways at once. Pick a motion, play it, and watch how the slope of each graph is the height of the one below.

Top: position. Middle: velocity, the slope of the top graph. Bottom: acceleration, the slope of the middle graph. The area under the velocity graph is the displacement.
Slope of x-t = velocity. A straight x-t line means constant velocity; a curve bending upwards means the velocity is increasing.
Slope of v-t = acceleration. A straight v-t line means constant acceleration, which is when the equations below apply.
Area under v-t = displacement. Area below the time axis counts as negative. Add the sizes of all areas to get the distance.
Area under a-t = change in velocity. You need the starting velocity to know the velocity itself.
Impossible graphs. Two velocities at one instant, a vertical x-t line (infinite speed) or a negative distance can never happen; exams use them as wrong options.

3. The equations of constant acceleration

When the acceleration a is constant (and only then):

v=u+at,s=ut+12at2,v2=u2+2as,s=(u+v)2t
u
velocity at t = 0 (with a sign)
v
velocity at time t
a
the constant acceleration (with a sign)
s
displacement in time t, not distance
Physical meaning
With constant acceleration the velocity grows in equal steps each second, so the average velocity is exactly halfway between u and v, and the displacement is that average times the time.

Distance in the nth second (the second from t = n − 1 to t = n): sn=u+a2(2n−1). Starting from rest, the distances in successive seconds are in the ratio 1 : 3 : 5 : 7 … (Galileo’s odd-number rule), and the distances in the first 1, 2, 3 seconds are in the ratio 1 : 4 : 9.

Stopping distance grows as the square of speed: s=u2/(2a). Double the speed and the braking distance becomes four times as long.

4. Free fall and vertical throws

Near the Earth, without air resistance, every body has the same downward acceleration g ≈ 9.8 m/s² (exams sometimes use 10). Take up as positive, so a = −g.

  • Thrown up at u: time to the top u/g, maximum height u2/(2g), total time back to the hand 2u/g, and it returns with speed u.
  • At equal heights going up and coming down, the speeds are equal (energy is conserved).
  • Dropped from height h: time 2h/g, landing speed 2gh.

“A body thrown downwards from a tower and one thrown upwards with the same speed land with different speeds.” They land with the same speed. The one thrown up comes back past the top of the tower moving down at the same speed u, and from there its motion is identical to the other’s. It just takes longer.

5. Relative velocity in one dimension

The velocity of A as seen by B is vAB=vA−vB (with signs). Two bodies moving the same way close at the difference of their speeds; moving towards each other, at the sum. In chase problems, write each position as a function of time and set them equal.

Two bodies in free fall have zero relative acceleration (both accelerate at g), so seen from one, the other moves at a constant velocity. Many “two balls thrown at different times” questions become one-line problems this way.

6. When the acceleration changes (JEE Main and Advanced)

The constant-acceleration equations fail when a changes. Go back to the definitions:

Given Use
a as a function of t v=u+∫0tadt, then x=x0+∫0tvdt
a as a function of x a=vdvdx, so ∫vdv=∫adx
a as a function of v dvdt=a(v) gives t; vdvdx=a(v) gives x

Example (level 4). A particle moving with v₀ has retardation proportional to its speed, a = −kv. Then dv/dt=−kv gives v=v0e−kt, and vdv/dx=−kv gives v=v0−kx: it stops after a distance v0/k, but only after an infinite time.

  • Fix an origin and a positive direction first; displacement, velocity and acceleration carry signs.
  • Speeding up when v and a have the same sign, slowing down when opposite.
  • Slope of x-t = v, slope of v-t = a; area under v-t = displacement, area under a-t = change in velocity.
  • v = u + at, s = ut + ½at², v² = u² + 2as, only for constant acceleration; nth-second distance u + a(2n − 1)/2.
  • Free fall: a = −g with up positive; time up u/g, height u²/2g, returns with speed u.
  • Relative velocity v_A − v_B; bodies in free fall have zero relative acceleration.
  • Changing acceleration: integrate, using a = dv/dt or a = v dv/dx.

Check yourself

1A car's velocity-time graph is a straight line sloping down and crossing the time axis. After it crosses, the car is:
2A ball is thrown straight up. At the highest point:
3Two trains move towards each other on parallel tracks at 20 m/s and 30 m/s. The speed of one as seen from the other is:

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.