All lessons

Module 48: p-block elements (groups 13 to 18) · Lesson 48.1 · about 40 min

p-block elements (groups 13 to 18)

Groups 13 to 18 in one clear order: trends, the inert pair effect and the anomalous first member, then boron, carbon and silicon, nitrogen and phosphorus, oxygen and sulphur, the halogens and the noble gases, with their key compounds, industrial processes, oxoacids and shapes, from basics to JEE Advanced depth.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 and 12 · about 40 minutes. By the end you will be able to explain the trends in groups 13 to 18, predict shapes and oxidation states, write the key preparations and industrial processes, and rank oxoacids and hydrides by acidity, stability and reducing power.

Two ideas run through the whole p-block. First, the top element of each group is small, highly electronegative and has no d orbitals, so it behaves differently (N, O and F form hydrogen bonds and multiple bonds; their heavier cousins form more bonds). Second, going down a group, the ns² pair gets lazier (the inert pair effect), so lower oxidation states become more stable.
  • Oxidation states. The group oxidation state is the number of valence electrons (group 13: +3, group 15: +5). Down the group, the state two lower becomes more stable: Tl⁺ over Tl³⁺, Pb²⁺ over Pb⁴⁺, Bi³⁺ over Bi⁵⁺. So PbO₂ and NaBiO₃ are strong oxidising agents.
  • Anomalous first member. Small size, high electronegativity, no d orbitals. Nitrogen forms N≡N (a gas) while phosphorus forms P₄ (a solid); carbon forms long chains (catenation); fluorine shows only −1.
  • Hydrides. Down a group, thermal stability falls, reducing power rises, bond angle falls toward 90°, and (for groups 16 and 17) acid strength rises. Boiling point rises down the group, except the first hydride, which is lifted by hydrogen bonding.
Pick a group and a property. Look for the break in each trend: NH₃, H₂O and HF boil far higher than the pattern suggests, F₂ has a weaker bond than Cl₂, and chlorine, not fluorine, has the most negative electron gain enthalpy.
Inert pair effect
the ns² electrons of heavy p-block atoms hold back from bonding, so the oxidation state two below the group value is more stable
Basicity of an oxoacid
number of H atoms on oxygen (only O-H ionises)
Steric number
bonded atoms + lone pairs on the central atom; it sets the arrangement (VSEPR)
Lewis acid
accepts an electron pair (BF₃, AlCl₃); Lewis base gives one (NH₃)
Physical meaning
Small atoms hold electrons tightly and bond strongly to H; big atoms hold them loosely and give up H easily. Most trends follow from that.

2. Group 13: boron and aluminium

Boron is a non-metal; the rest are metals. With only 6 electrons around it, boron in BF₃ is electron deficient and a Lewis acid (BF₃ < BCl₃ < BBr₃ in strength, because back bonding from F’s small p orbital is strongest).

  • Borax Na₂B₄O₇·10H₂O gives a glassy bead on heating that turns colours with metal oxides (borax bead test). In water it is alkaline: B₄O₇²⁻ + 7H₂O → 2OH⁻ + 4H₃BO₃.
  • Boric acid H₃BO₃ is a weak monobasic Lewis acid: it does not give H⁺ itself but takes OH⁻ from water, B(OH)₃ + H₂O → [B(OH)₄]⁻ + H⁺.
  • Diborane B₂H₆ has two 3-centre-2-electron (banana) bonds: two B-H-B bridges holding one electron pair each, plus four ordinary terminal B-H bonds.
  • Aluminium is protected by a thin oxide layer; it is amphoteric and dissolves in both acid and NaOH (giving H₂). AlCl₃ exists as the dimer Al₂Cl₆ in the vapour.

3. Group 14: carbon and silicon

Carbon’s allotropes: diamond (sp³, hard, insulator), graphite (sp², layers, conducts along the layers, a lubricant), fullerenes (C₆₀, sp²), graphene. CO is a toxic neutral oxide that binds haemoglobin far more strongly than O₂; CO₂ is acidic. SiO₂ is a giant network (quartz), not a gas, because Si does not form stable π bonds with O.

SiCl₄ hydrolyses easily (Si has empty d orbitals for water to attack), while CCl₄ does not. Silicones are (R₂SiO)ₙ chains made by hydrolysing R₂SiCl₂: water repellent and heat stable. Silicates are built from SiO₄⁴⁻ tetrahedra; zeolites are aluminosilicates used as shape-selective catalysts and water softeners.

4. Group 15: nitrogen and phosphorus

  • Ammonia by the Haber process: N₂ + 3H₂ ⇌ 2NH₃, ΔH negative; iron catalyst with molybdenum promoter, about 200 atm and 700 K (a compromise between yield and speed).
  • Nitric acid by the Ostwald process: 4NH₃ + 5O₂ → 4NO + 6H₂O (Pt/Rh gauze), 2NO + O₂ → 2NO₂, 3NO₂ + H₂O → 2HNO₃ + NO. Dilute HNO₃ with copper gives NO; concentrated gives NO₂. Gold and platinum dissolve only in aqua regia (3 HCl : 1 HNO₃).
  • Phosphorus: white P₄ (reactive, glows in air, stored under water), red (polymeric, safer), black (most stable). PH₃ forms from white P and hot NaOH. PCl₅ is trigonal bipyramidal as a gas but [PCl₄]⁺[PCl₆]⁻ as a solid.

Oxoacids of phosphorus. Basicity = number of P-OH groups; P-H bonds make the acid a reducing agent.

Acid P oxidation state Basicity P-H bonds
H₃PO₂ (hypophosphorous) +1 1 2
H₃PO₃ (phosphorous) +3 2 1
H₃PO₄ (orthophosphoric) +5 3 0
H₄P₂O₇ (pyrophosphoric) +5 4 0

5. Group 16: oxygen and sulphur

Ozone O₃ is bent, a powerful oxidising agent (O₃ → O₂ + [O]); it turns moist KI paper blue-black with starch by freeing iodine, used to measure it. Oxides are acidic (SO₂, CO₂), basic (Na₂O, CaO), amphoteric (Al₂O₃, ZnO) or neutral (CO, N₂O).

Sulphuric acid by the contact process: S → SO₂; 2SO₂ + O₂ ⇌ 2SO₃ (V₂O₅ catalyst, about 720 K, 2 bar); SO₃ is absorbed in concentrated H₂SO₄ to give oleum H₂S₂O₇, then diluted. Concentrated H₂SO₄ is a strong dehydrating agent (chars sugar) and an oxidising agent when hot. SO₂ is a reducing agent: it decolourises acidified KMnO₄ and turns dichromate paper green.

6. Group 17: the halogens

All are oxidising agents; F₂ is the strongest (high hydration enthalpy of F⁻ and a weak F-F bond). Each halogen displaces the ones below it from their salts: Cl₂ + 2KBr → 2KCl + Br₂.

  • Chlorine from MnO₂ + 4HCl, or KMnO₄ + HCl; industrially by electrolysing brine. With cold dilute NaOH: NaCl + NaOCl; with hot concentrated NaOH: 5NaCl + NaClO₃ (a disproportionation). With dry slaked lime: bleaching powder Ca(OCl)Cl.
  • Oxoacids of chlorine: HOCl < HClO₂ < HClO₃ < HClO₄ in acid strength (more O atoms spread the negative charge of the anion), but oxidising power runs the other way: HOCl is the best oxidiser.
  • Interhalogens XX′ₙ (n = 1, 3, 5, 7), with the larger halogen in the centre: ClF₃ is T-shaped, BrF₅ square pyramidal, IF₇ pentagonal bipyramidal. They are more reactive than the halogens themselves (except F₂).

7. Group 18: noble gases

Full shells make them inert, but xenon (large, lowest ionisation energy) reacts with fluorine and oxygen. Bartlett made the first noble-gas compound in 1962 after noticing that O₂ and Xe have nearly the same ionisation energy.

Compound Xe lone pairs Steric number Shape
XeF₂ 3 5 linear
XeF₄ 2 6 square planar
XeF₆ 1 7 distorted octahedral
XeO₃ 1 4 trigonal pyramidal
XeOF₄ 1 6 square pyramidal

XeF₆ hydrolyses completely to XeO₃ (explosive). Helium is used in diving gas and to cool superconducting magnets; argon in light bulbs and welding.

“Fluorine has the most negative electron gain enthalpy, since it is the most electronegative.” Chlorine does (−349 vs −333 kJ/mol). Fluorine’s 2p shell is so small that an incoming electron is repelled by the electrons already there. Electronegativity (pull on shared electrons in a bond) and electron gain enthalpy (energy released by a free atom) are different things.

“More oxygen atoms make an oxoacid a stronger oxidising agent.” For chlorine it is the reverse: HOCl oxidises faster and more strongly than HClO₄. Perchlorate is very stable because its charge is spread over four oxygens. Acid strength and oxidising power do not go together.

  • Inert pair effect: lower oxidation state more stable down the group (Tl⁺, Pb²⁺, Bi³⁺).
  • First member is anomalous: H-bonding hydrides, multiple bonds, no d orbitals.
  • Down groups 15 to 17: hydride stability falls, reducing power and acid strength rise, bond angle falls.
  • Boric acid: monobasic Lewis acid. Diborane: two 3-centre-2-electron bonds.
  • Haber (Fe, Mo), Ostwald (Pt/Rh), contact (V₂O₅): know the catalyst and conditions.
  • Basicity of oxoacids = number of O-H; P-H bonds mean reducing power (H₃PO₂, H₃PO₃).
  • Xenon shapes: count lone pairs = (8 − F atoms − 2 × O atoms)/2, then VSEPR.

Check yourself

1H₃PO₃ is a dibasic acid because:
2The shape of XeF₄ is:
3Which is the strongest acid in water?

Sources

  • NEET (UG), JEE Main and JEE Advanced 2026 syllabi: p-block elements
  • Bond enthalpies, boiling points and electron gain enthalpies: CRC Handbook of Chemistry and Physics, 97th edition
  • IUPAC Nomenclature of Inorganic Chemistry, Recommendations 2005 https://iupac.org/what-we-do/books/redbook/

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.