All lessons

Module 13: Thermodynamics · Lesson 13.2 · about 28 min

Thermodynamics: question types and traps

Every way entrance exams ask about thermodynamics: first-law sign problems, work from P-V graphs, the four standard processes, comparing isothermal and adiabatic curves, polytropic processes, specific heats of mixtures, cycles and their efficiency, Carnot engines, refrigerators and entropy, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 28 minutes. Read the lesson Thermodynamics first. Here you meet every question type, with a worked example and the trap, then practise.

For every process, fill in a three-column table: Q, ΔU and W. ΔU comes from the temperature change, W from the area under the P-V curve, and Q from the first law. Most questions are just one cell of that table.

The ten question types

1. First-law signs. Q = ΔU + W with Q in and W by the gas. Trap: chemistry books use W on the gas, which flips the sign.
2. Work from a P-V graph. Area under the curve; cycle area for net work. Trap: on a V-P graph (axes swapped) clockwise means the opposite.
3. Standard processes. Isochoric, isobaric, isothermal, adiabatic: know W, Q, ΔU for each. Trap: ΔU = nC_vΔT even in an isobaric process.
4. Isothermal vs adiabatic. Adiabatic is γ times steeper; for the same expansion it does less work and ends colder.
5. Other graphs. P-T, V-T and T-S diagrams: redraw on P-V first. On V-T, a line through the origin is isobaric.
6. Polytropic and P ∝ V processes. C = C_v + R/(1 − x). For P ∝ V, x = −1 and C = C_v + R/2.
7. Specific heats and mixtures. C_v of a mixture = Σn C_v/Σn; γ from the mixture's C_p/C_v, not the average of the γs.
8. Cycles and efficiency. η = net work/heat absorbed (only the positive Q's). Trap: dividing by the net heat.
9. Carnot, refrigerators, heat pumps. 1 − T_c/T_h; β = T_c/(T_h − T_c); heat pump β + 1. Trap: Celsius instead of kelvin.
10. Second law and entropy. Statement questions; ΔS = Q/T for phase changes and reservoirs; entropy of an isolated system never falls.

Worked examples

Example 1 (level 3, isobaric). 2 mol of a diatomic gas is heated at constant pressure from 300 K to 400 K. Find Q, ΔU and W. (R = 8.3 J/mol K)

Solution. ΔU = nC_vΔT = 2 × 2.5 × 8.3 × 100 = 4150 J. W = nRΔT = 1660 J. Q = nC_pΔT = 2 × 3.5 × 8.3 × 100 = 5810 J. Check: 4150 + 1660 = 5810. ✓ The fraction of heat that becomes work is R/C_p = 2/7.

Example 2 (level 4, mixture). 1 mol of helium is mixed with 1 mol of oxygen. Find γ of the mixture.

Solution. C_v = (1.5R + 2.5R)/2 = 2R. C_p = C_v + R = 3R. γ = 1.5. Trap: averaging 1.67 and 1.4 gives 1.53.

Example 3 (level 4, two Carnot engines). Engine A works between 800 K and T; engine B uses A’s rejected heat and works between T and 200 K. Find T if both have the same efficiency, and if both do the same work.

Solution. Same efficiency: 1−T/800=1−200/T, so T² = 160 000 and T = 400 K (the geometric mean). Same work: each takes the same share of the temperature drop, so T = (800 + 200)/2 = 500 K (the arithmetic mean).

Example 4 (level 5, P ∝ V). An ideal monatomic gas expands so that P ∝ V, from V₀ to 2V₀ starting at temperature T₀. Find the heat absorbed per mole.

Solution. PV ∝ V², so T ends at 4T₀, ΔT = 3T₀. Molar heat C = C_v + R/(1 − x) with x = −1: C = 1.5R + 0.5R = 2R. Q = 2R × 3T₀ = 6RT₀. Check: W = area of trapezium = ½(P₀ + 2P₀)V₀ = 1.5RT₀, ΔU = 4.5RT₀, total 6RT₀. ✓

“In a cycle the gas gains no energy, so the engine does no work.” ΔU is zero over a cycle, but the net heat in is not. The net work out equals the net heat in, and it is the area of the loop.

Q-ΔU-W table
one row per step of a process; ΔU column adds to zero over a cycle
Heat absorbed
for efficiency, add only the steps where Q is positive
Physical meaning
Engines are limited by the second law, not by engineering: some heat must always be dumped at the cold side.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: signs, P-V areas, standard processes, isothermal vs adiabatic, other graphs, polytropic, mixtures, cycles, Carnot and refrigerators, entropy.
  • ΔU = nC_vΔT always for an ideal gas; W = nRΔT at constant pressure.
  • Mixture γ from total C_p/C_v, never by averaging γ.
  • Cycle efficiency = net work/heat absorbed.
  • Two Carnot engines in series: equal efficiency at √(T₁T₂), equal work at (T₁ + T₂)/2.

Check yourself

1A gas absorbs 500 J of heat and does 200 J of work. Its internal energy:
2Equal amounts of a gas expand from the same state to the same final volume, once isothermally and once adiabatically. More work is done:
3A refrigerator has a coefficient of performance of 4. To remove 400 J from the inside, it needs:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Thermodynamics; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.