All lessons

Module 66: Straight lines · Lesson 66.2 · about 26 min

Straight lines: question types and traps

Every way entrance exams test straight lines: section formula and centres of a triangle, area and collinearity, slopes and angles, forms of a line, distances, foot and image, reflection of a line, angle bisectors, families and fixed points, concurrency, locus and pairs of lines, each with its method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Maths · Class 11 · about 26 minutes. Read Straight lines first. Here are the question types, worked examples and practice.

Straight-line questions reward a sketch and the right form of the equation. Draw the points, guess the answer from the picture, then pick the form (point-slope, intercept, normal, family) that makes the algebra shortest.

The question types

1. Section, centroid and other centres. Average for the centroid; side-weighted average for the incentre. Trap: weighting the incentre by the adjacent sides instead of the opposite ones.
2. Area and collinearity. The shoelace formula; zero area means collinear. Trap: forgetting the half or the absolute value.
3. Slope and angle. tan φ = |(m₁ − m₂)/(1 + m₁m₂)|. Trap: a vertical line has no slope; handle it separately.
4. Equation of a line. Choose the form that uses the given data. Trap: intercept form fails for a line through the origin.
5. Distances. Point to line; parallel lines after matching a and b. Trap: not normalising before subtracting constants.
6. Foot, image and reflection of a line. The ratio formula; reflect two points of a line to reflect the line. Trap: the factor 2 belongs to the image, not the foot.
7. Angle bisectors. Equal normalised distances, ±. Trap: picking the wrong sign for the acute or obtuse bisector; test with a point.
8. Families and fixed points. L₁ + λL₂ = 0; collect the parameter. Trap: L₂ itself is not in the family L₁ + λL₂.
9. Locus. Point (h, k), condition, eliminate the parameter. Trap: keeping parts of the curve the moving point can never reach.
10. Pair of lines. ax² + 2hxy + by² = 0; a + b = 0 means perpendicular. Trap: sum of slopes is −2h/b, not −h/b.

Worked examples

Example 1 (level 3, incentre). Find the incentre of the triangle with vertices A(0, 0), B(4, 0), C(0, 3). Solution. The sides opposite A, B, C are a = BC = 5, b = CA = 3, c = AB = 4. Incentre = (5·0 + 3·4 + 4·0, 5·0 + 3·0 + 4·3)/12 = (1, 1). Check: the inradius of a 3-4-5 triangle is 1, and the incircle touches both axes.

Example 2 (level 4, reflection of a line). Reflect the line x − 2y + 3 = 0 in the line y = x. Solution. Reflecting in y = x swaps x and y. So the image is y − 2x + 3 = 0, that is 2x − y − 3 = 0. For a general mirror, find where the two lines meet (that point stays fixed) and reflect one other point, then join them.

Example 3 (level 4, distance from a family). Find the greatest distance from the origin to a line of the family (1 + k)x + (2 − k)y = 3. Solution. Every line passes through the fixed point P(1, 1). The distance from O to a line through P is at most OP, reached by the line perpendicular to OP. Greatest distance √2.

Example 4 (level 5, pair of lines). Find the angle between the lines 2x² + 5xy + 2y² = 0. Solution. a = 2, h = 5/2, b = 2. tan φ = 2√(h² − ab)/|a + b| = 2√(25/4 − 4)/4 = 2 × (3/2)/4 = 3/4. φ = tan⁻¹(3/4). (Factor to check: (2x + y)(x + 2y) = 0, slopes −2 and −1/2.)

“The farthest line of a family from a point is the one with the largest constant term.” Changing the parameter turns the line about the fixed point; nothing slides away. The greatest distance is the distance to the fixed point, reached when the line is perpendicular to the segment joining them.

Normal (a, b)
the direction perpendicular to ax + by + c = 0
Fixed point
the point every line of a one-parameter family passes through
Physical meaning
A one-parameter family of lines is usually a line turning about a pin. Find the pin, and questions about the farthest line, or the line through another point, become easy.

Practise

  • Incentre weights the vertices by the lengths of the opposite sides.
  • Right triangle: orthocentre at the right angle, circumcentre at the midpoint of the hypotenuse.
  • Normalise both lines before using the parallel-lines distance or the bisector formula.
  • Image factor 2; foot factor 1.
  • A family L₁ + λL₂ = 0 turns about a fixed point; greatest distance is to that point.
  • Pair of lines: m₁ + m₂ = −2h/b, m₁m₂ = a/b, tan φ = 2√(h² − ab)/|a + b|.

Check yourself

1The orthocentre of the triangle with vertices (0, 0), (6, 0) and (0, 8) is:
2For every k, the line (1 + k)x + (2 − k)y = 3 passes through:
3The lines given by x² − 5xy + 6y² = 0 have slopes:

Sources

  • JEE Main and JEE Advanced 2026 syllabi: Coordinate geometry; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.