All lessons

Module 21: Magnetism and matter · Lesson 21.1 · about 30 min

Magnetism and matter

The bar magnet as a magnetic dipole, its field, torque, energy and oscillation, cutting and bending magnets, the Earth's field and neutral points, magnetisation, H, susceptibility and permeability, dia-, para- and ferromagnetism, Curie's law, domains and the hysteresis loop.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 30 minutes. By the end you will be able to treat a magnet as a dipole, solve torque, oscillation and neutral-point problems, and sort materials by how they respond to a field.

Every magnet is a crowd of tiny current loops: electrons orbiting and spinning inside atoms. In most materials the loops point every which way and cancel. A field lines them up a little (paramagnets), pushes them slightly against itself (diamagnets), or, in iron, lines up whole regions at once (ferromagnets).

1. The bar magnet as a dipole

A bar magnet behaves like a current loop, a magnetic dipole with moment m, pointing from its S pole to its N pole inside it. Its field lines run N to S outside and S to N inside, forming closed loops: there are no isolated magnetic poles (no monopoles), so the magnetic flux through any closed surface is zero.

For a short magnet at distance r (much larger than its length):

Where Field
On the axis B=μ04π2mr3, along m
On the equatorial line B=μ04πmr3, opposite to m

These match the electric dipole formulas with k replaced by μ₀/4π.

Cutting and bending. Cut across (perpendicular to the length) into two: each piece has half the length, the same pole strength, half the moment. Cut along the length: half the pole strength, half the moment. Bend a magnet of length L into a semicircle: the poles are now a distance 2L/π apart, so the moment drops to 2πm.

2. A magnet in a uniform field

The same rules as the electric dipole:

τ→=m→×B→,U=−m→⋅B→=−mBcos⁡θ,T=2πImB
m
magnetic moment (A m² or J/T)
θ
angle between m and B
I
moment of inertia of the magnet about its suspension (kg m²)
Physical meaning
A compass needle settles along the field because that is its lowest energy, and it swings about that position like a pendulum, faster in a stronger field.

Work to turn a magnet from θ₁ to θ₂ is mB(cos⁡θ1−cos⁡θ2); from along the field to against it, 2mB. Comparing periods in two fields gives the ratio of the fields: B1B2=T22T12.

3. The Earth’s magnetism

The Earth’s field is roughly that of a huge dipole whose south pole points to the geographic north. At a place: declination is the angle between geographic and magnetic north; dip (inclination) δ is the angle the field makes with the horizontal. With total field B_E: BH=BEcos⁡δ, BV=BEsin⁡δ, tan⁡δ=BV/BH. At the magnetic equator dip is 0°; at the magnetic poles 90°.

Neutral points are where a magnet’s field cancels B_H exactly. N pole pointing north: on the equatorial line. N pole pointing south: on the axis.

A deflection magnetometer (tangent law): a small needle in two perpendicular fields B and B_H settles at θ with B=BHtan⁡θ.

4. Magnetisation, H and susceptibility

When a material sits in a field, its atoms line up and add their own moments. Magnetisation M is the magnetic moment per unit volume (A/m). The magnetising field H (A/m) is the part set by free currents alone, such as nI in a solenoid. Then:

B=μ0(H+M),M=χH,μr=1+χ,B=μ0μrH

5. Dia-, para- and ferromagnetism

Type χ Behaviour Examples
Diamagnetic small, negative (about −10⁻⁵) weakly repelled, field lines pushed out; moves to weaker field bismuth, copper, water, superconductors (χ = −1, perfect)
Paramagnetic small, positive (10⁻⁵ to 10⁻³) weakly attracted; moves to stronger field aluminium, sodium, oxygen
Ferromagnetic large, positive (10³ or more) strongly attracted; domains iron, cobalt, nickel, gadolinium

Curie’s law for paramagnets: χ=CT; heat shakes the atoms out of line. A ferromagnet becomes paramagnetic above its Curie temperature (iron about 770 °C), with χ=CT−TC above it. Diamagnetism hardly depends on temperature.

“Only iron responds to magnets.” Every material does. Water is diamagnetic, and a strong enough field (about 16 T) can levitate a living frog. The effect is just a million times weaker than in iron.

6. Domains and the hysteresis loop

A ferromagnet is made of domains, regions about a tenth of a millimetre across, each fully magnetised. In unmagnetised iron they point in random directions. A field makes the well-aligned domains grow and the others turn. Remove the field and some alignment stays: that lag is hysteresis.

B against H as the magnetising field swings back and forth. Retentivity is the B left when H returns to zero; coercivity is the reverse H needed to remove it. The loop's area is the energy lost as heat in each cycle.

Soft iron (thin loop, low coercivity, high permeability) suits transformer cores and electromagnets. Steel and alnico (fat loop, high retentivity and coercivity) suit permanent magnets.

Atomic moments. An electron in orbit is a current loop: m=evr2=e2meL. With Bohr’s L = nh/2π, the smallest moment is the Bohr magneton, μB=eh4πme=9.27×10−24 J/T.

  • A magnet is a dipole; field lines are closed loops; no monopoles; net flux through a closed surface is zero.
  • Axis (μ₀/4π)2m/r³, equator (μ₀/4π)m/r³.
  • τ = mB sin θ, U = −mB cos θ, T = 2π√(I/mB).
  • Cut across: m halves, pole strength same; cut lengthwise: both halve; semicircle: 2m/π.
  • B_H = B_E cos δ, tan δ = B_V/B_H; neutral points where the magnet’s field cancels B_H.
  • B = μ₀(H + M), χ = M/H, μ_r = 1 + χ.
  • Dia: χ < 0; para: small χ > 0, χ = C/T; ferro: large χ, domains, paramagnetic above T_C.
  • Loop area = energy lost per cycle: soft iron for cores, steel for permanent magnets.

Check yourself

1A bar magnet is cut into two equal halves along its length (parallel to its axis). Each half has:
2Which material is weakly repelled by a magnet and has negative susceptibility?
3The material for a transformer core should have:

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.