All lessons

Module 26: Wave optics · Lesson 26.1 · about 32 min

Wave optics

Wavefronts and Huygens' principle, coherent sources and interference, Young's double slit with fringe width, intensity and shifts by slabs and media, thin films, single slit diffraction, resolving power, and polarisation with Malus's law and Brewster's angle.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 12 · about 32 minutes. By the end you will be able to find fringe positions and intensities in Young’s experiment and its variations, handle single slit diffraction and resolving power, and solve polarisation problems.

Light is a wave, so two beams can add up (bright) or cancel (dark) depending on how far each has travelled. A path difference of a whole number of wavelengths means bright; an odd number of half wavelengths means dark. Almost every result in this chapter is that sentence turned into geometry.

1. Wavefronts and Huygens’ principle

A wavefront joins points vibrating in step (same phase). Rays are perpendicular to wavefronts. Huygens’ principle: every point on a wavefront acts as a source of small secondary waves, and the new wavefront is the surface touching them all. It explains reflection and refraction: in a slower medium the secondary waves travel less far, so the wavefront tilts, giving Snell’s law sin⁡isin⁡r=v1v2. (Newton’s particle model wrongly predicted light speeds up in water.)

2. Interference and coherence

Two waves of amplitudes a₁, a₂ with phase difference φ give intensity

I=I1+I2+2I1I2cos⁡φ,φ=2πλΔx

Maxima (I1+I2)2 where Δx = nλ; minima (I1−I2)2 where Δx = (n + ½)λ. A steady pattern needs coherent sources: same frequency and a fixed phase difference. Two separate bulbs are never coherent, so Young split one source into two slits.

“Dark fringes mean energy is destroyed.” Energy is only moved from the dark places to the bright ones. Bright fringes get 4I (not 2I), dark get 0, and the average over the pattern is exactly 2I.

3. Young’s double slit

Slits a distance d apart, screen D away. At a point y from the centre the path difference is Δx=dsin⁡θ≈ydD.

ybright=nλDd,ydark=(n+12)λDd,β=λDd
λ
wavelength of the light (in the medium between slits and screen)
d
distance between the two slits
D
distance from slits to screen
β
fringe width, the gap between neighbouring bright (or dark) fringes
Physical meaning
Moving one fringe along the screen adds one whole wavelength to the path difference; slits closer together need a longer move to do that, so the fringes spread out.

Try it here, then switch to a single slit.

Intensity across the screen, with the pattern as it looks below. Double slit: evenly spaced fringes inside a broad diffraction envelope set by the slit width. Single slit: a bright central band twice as wide as the faint side bands.

Variations (JEE favourites).

  • In a medium of index μ: β becomes β/μ.
  • A thin slab (thickness t, index μ) over one slit adds an extra path (μ−1)t; the whole pattern shifts towards that slit by (μ−1)tDd, with β unchanged.
  • White light: the central fringe is white, the others coloured (violet inside, red outside), and after a few fringes the colours overlap into white again.
  • Source moved sideways or slits at unequal distances: add the extra path before the slits to the path after.
  • Intensity at a point: I=Imax⁡cos2⁡(πΔxλ) for equal slits.

4. Thin films

Light reflecting off the top and bottom of a thin film (thickness t, index μ) interferes. The extra path is 2μt cos r, plus an extra λ/2 for a reflection off a denser medium. For a soap film in air seen in reflection at near-normal incidence: bright when 2μt=(n+12)λ, dark when 2μt=nλ. This makes the colours of soap bubbles and oil on water. An anti-reflection coating of thickness λ/(4μ) makes the two reflections cancel.

5. Single slit diffraction

Light through a single slit of width a spreads out. Pairing up points across the slit, the first dark band is where asin⁡θ=λ:

minima: asin⁡θ=nλ,central maximum width on screen=2λDa

Secondary maxima are at about asin⁡θ=(n+12)λ and much fainter (the first is under 5% of the central one). Diffraction is noticeable only when the opening is not too large compared with λ: sound bends round doors, light hardly does. The Fresnel distance zF=a2/λ is how far a beam travels before diffraction spreading matches the aperture size; ray optics works for shorter distances.

Resolving power. Diffraction blurs every point into a small disc. Two points are just resolved when the centre of one disc falls on the first dark ring of the other (Rayleigh): for a circular aperture of diameter D, θmin⁡=1.22λD. Bigger telescopes and shorter wavelengths resolve finer detail. A microscope’s resolving power improves with an oil-immersion lens.

6. Polarisation

Light is a transverse wave, so its vibration direction can be filtered. A polaroid passes only the electric field along its axis. Unpolarised light loses half its intensity in the first polaroid. After that, Malus’s law:

I=I0cos2⁡θ

where θ is the angle between the light’s vibration and the polaroid’s axis. Crossed polaroids (90°) block everything; a third between them at 45° lets through I₀/8 of the original unpolarised intensity.

Brewster’s law. Reflected light is fully polarised when the reflected and refracted rays are at 90°, at tan⁡θB=μ. Sky light scattered at 90° is also polarised, which is why polarising sunglasses darken the sky and cut glare from water.

Worked example (level 4). In a double slit set-up with β = 0.4 mm, a mica sheet (μ = 1.6) 6 µm thick covers one slit, with λ = 600 nm. Extra path = 0.6 × 6 = 3.6 µm = 6λ. The pattern shifts by 6 fringes (2.4 mm) towards the covered slit; the fringe width stays 0.4 mm.

  • Huygens: each point of a wavefront is a new source; light is slower in denser media.
  • I = I₁ + I₂ + 2√(I₁I₂) cos φ; φ = 2πΔx/λ. Coherent sources needed.
  • YDSE: β = λD/d; bright at nβ, dark at (n + ½)β; in a medium β/μ.
  • Slab on one slit: shift (μ − 1)tD/d towards it; β unchanged.
  • Soap film (reflection): bright 2μt = (n + ½)λ; coating thickness λ/4μ.
  • Single slit: minima a sin θ = nλ; central width 2λD/a.
  • Resolution θ = 1.22λ/D.
  • Malus I = I₀cos²θ; unpolarised loses half; Brewster tan θ_B = μ.

Check yourself

1In Young's experiment the whole apparatus is dipped in water (μ = 4/3). The fringe width:
2Two coherent sources of intensity I each interfere. The maximum and minimum intensities are:
3Unpolarised light falls on a glass surface (μ = √3) at the Brewster angle. The angle of incidence is:

Sources

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.