All lessons

Module 4: Vectors and motion in a plane · Lesson 4.1 · about 34 min

Vectors and motion in a plane

Vectors and their components, dot and cross products, projectile motion from the ground, from a height and on an incline, relative velocity for rivers, rain and wind, and uniform and non-uniform circular motion.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 34 minutes. By the end you will be able to add and split vectors, use the dot and cross products, solve any projectile problem (level ground, from a height, on a slope), handle rivers, rain and wind with relative velocity, and find the acceleration in circular motion.

Motion in a plane is two straight-line motions happening at the same time, one along x and one along y, linked only by the clock. Split every vector into components, solve each direction on its own, and join the answers at the end.

1. Vectors: size, direction and components

A vector has a size (magnitude) and a direction: displacement, velocity, force. A scalar has only a size: mass, time, energy. Two vectors add by the triangle rule: put the tail of the second at the head of the first; the sum runs from the first tail to the last head.

For two vectors of sizes A and B with angle θ between them:

|A→+B→|=A2+B2+2ABcos⁡θ,tan⁡α=Bsin⁡θA+Bcos⁡θ

Here α is the angle the sum makes with A. The sum is largest (A + B) at θ = 0 and smallest (|A − B|) at θ = 180°, so three forces can balance only if each is no bigger than the sum of the other two.

Components. A vector of size A at angle θ to the x axis is A→=Acos⁡θiˆ+Asin⁡θjˆ. Unit vectors iˆ,jˆ,kˆ have size 1 and point along x, y, z. To add vectors, add their components. A unit vector along any vector is Aˆ=A→/A.

2. Dot and cross products

Product Formula Result Use
Dot A→⋅B→=ABcos⁡θ=AxBx+AyBy+AzBz scalar work, angle between vectors, projection
Cross A→×B→=ABsin⁡θnˆ vector, perpendicular to both torque, area of a parallelogram

The dot product is zero for perpendicular vectors; the cross product is zero for parallel ones. A→×B→=−B→×A→. The size of A→×B→ is the area of the parallelogram the two vectors make.

“The resultant of two vectors is always bigger than each of them.” No. At 120° two equal vectors of size A have a resultant of exactly A, and beyond that it is smaller. At 180° the resultant is A − B.

3. Projectile motion

Once thrown, a body (with no air resistance) has acceleration g straight down and nothing sideways. So:

  • Horizontal: constant velocity ux=ucos⁡θ, so x=ucos⁡θt.
  • Vertical: constant acceleration −g, so vy=usin⁡θ−gt and y=usin⁡θt−12gt2.

Play with speed, angle and launch height below. Watch the arrows: the horizontal one never changes.

A projectile path. The horizontal velocity arrow is the same everywhere; the vertical arrow shrinks to zero at the top and grows downwards after. The dashed path is the complementary angle 90° − θ, which lands at the same spot.
T=2usin⁡θg,H=u2sin2⁡θ2g,R=u2sin⁡2θg,y=xtan⁡θ−gx22u2cos2⁡θ
u
launch speed
θ
launch angle above the horizontal
T, H, R
time of flight, greatest height and horizontal range, all for landing at the launch level
y(x)
the trajectory equation: a parabola; written as y = x tan θ (1 − x/R) it gives the range at once
Physical meaning
The time in the air is set only by the vertical motion. The horizontal speed just decides how far the body drifts in that time.

Useful results: the range is greatest at 45°, Rmax=u2/g, where H = R/4. In general tan⁡θ=4H/R. The speed at height h is u2−2gh, whatever the angle.

Thrown horizontally from a height h at speed u: time 2h/g (the same as a dropped stone), range u2h/g, landing speed u2+2gh.

On an incline of angle α (thrown at θ above the horizontal, up the slope), tilt the axes along the slope. Then g has parts g sin α along and g cos α into the slope. The time of flight is T=2usin⁡(θ−α)gcos⁡α and the range up the slope is greatest when the launch direction bisects the angle between the slope and the vertical, giving Rmax=u2g(1+sin⁡α).

“A bullet fired horizontally hits the ground later than one dropped from the same height.” They land together. The horizontal speed has no effect on the vertical motion, and both start with zero vertical velocity.

4. Relative velocity in two dimensions

The velocity of A as seen by B is v→AB=v→A−v→B, now as vectors. Three classic settings:

  • River crossing (width d, river speed w, swimmer speed v in still water). Least time: head straight across, t = d/v, drift = wd/v. Shortest path: head upstream at sin α = w/v, so you land opposite, t = d/v2−w2 (possible only if v > w).
  • Rain and a moving person. Rain falling straight down looks slanted to a walker. The umbrella must point along the rain’s velocity relative to the walker, v→rain−v→man.
  • Aircraft and wind. The plane’s ground velocity = its air velocity + the wind’s velocity. To fly due north in a westward wind, point the nose a little east.

Closest approach (JEE Advanced). For two bodies moving at constant velocities, sit on one of them. The other moves in a straight line with the relative velocity. The closest distance is the perpendicular distance from you to that line, and it happens after time = (component of the initial separation along the relative velocity) ÷ (relative speed).

5. Circular motion

Angle turned θ (radians), angular velocity ω=dθ/dt, angular acceleration α=dω/dt. Linear and angular are linked by the radius: s=rθ, v=rω, at=rα. Time period T = 2π/ω, frequency f = 1/T.

Uniform circular motion: the speed is constant but the direction turns, so there is an acceleration towards the centre:

ac=v2r=ω2r

Non-uniform circular motion: the speed also changes, adding a tangential part at=dv/dt. The two parts are at right angles, so a=ac2+at2, and the total acceleration no longer points at the centre.

“Centripetal force is a new force that appears in circular motion.” It is not a new kind of force. It is the name for whatever real force (tension, friction, gravity, a normal force) points to the centre. Draw only real forces; their inward total must equal mv²/r.

Worked example (level 4). A particle moves on a circle of radius 2 m with speed v=2t m/s. At t = 1 s, the tangential acceleration is 2 m/s² and the centripetal one is 2²/2 = 2 m/s². Total = 2√2 m/s², at 45° to the velocity.

  • Split vectors into components; motion along x and along y are independent and share only the time.
  • Resultant of A and B: √(A² + B² + 2AB cos θ); between |A − B| and A + B.
  • Dot product AB cos θ (scalar, zero if perpendicular); cross product AB sin θ (vector, zero if parallel).
  • Projectile: T = 2u sin θ/g, H = u² sin²θ/2g, R = u² sin 2θ/g; R is greatest at 45°; θ and 90° − θ give the same range.
  • Thrown horizontally from height h: time √(2h/g), the same as a dropped body.
  • Relative velocity v_A − v_B; river: least time heads across, shortest path heads upstream with sin α = w/v.
  • Circular motion: a_c = v²/r inward; non-uniform adds a_t = dv/dt; total √(a_c² + a_t²).

Check yourself

1At the highest point of a projectile's path (no air resistance), which statement is true?
2Two angles of projection give the same range for the same speed on level ground. They are:
3A body moves in a circle at constant speed. Its acceleration is:

Sources

  • National Medical Commission NEET (UG) syllabus and JEE Main / JEE Advanced 2026 syllabi: Kinematics (motion in a plane, projectile motion, uniform circular motion, relative velocity)
  • Standard gravity g = 9.806 65 m/s² (exact by definition), BIPM SI Brochure, 9th edition https://www.bipm.org/en/publications/si-brochure

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.