All lessons

Module 39: Ionic equilibrium: acids, bases, pH and buffers · Lesson 39.2 · about 27 min

Ionic equilibrium: acids, bases, pH and buffers: question types and traps

Every way entrance exams ask about ionic equilibrium: acid-base theories, pH of strong, weak and very dilute solutions, mixing acids and bases, salt hydrolysis, buffers before and after adding acid, titration curves and indicators, solubility product, common ions and selective precipitation, each with a method and its trap. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 11 · about 27 minutes. Read Ionic equilibrium: acids, bases, pH and buffers first. Here are the question types, worked examples and practice.

Before any formula, decide what is actually in the beaker after everything has reacted: a strong acid, a weak acid, a salt, a buffer, or a saturated solution. Each one has its own short formula; using the wrong one is the commonest mistake.

The question types

1. Theories and conjugate pairs. Brønsted, Lewis, amphiprotic. Trap: the conjugate base of H₂PO₄⁻ is HPO₄²⁻, not PO₄³⁻.
2. pH of strong acids and bases. [H⁺] = n × C. Trap: 10⁻⁸ M HCl is not pH 8; dilution by 10 raises pH by 1 only for strong acids.
3. Weak acids and bases. √(KaC); Ostwald α = √(Ka/C). Trap: check α < 5% before using the shortcut.
4. Mixing. Count millimoles; neutralise; see what is left. Trap: divide by the total volume; a weak acid half neutralised is a buffer.
5. Salt hydrolysis. Identify the weak parent. Trap: CH₃COONH₄ pH does not depend on concentration.
6. Buffers. Henderson; after adding acid, convert salt to acid by the moles added. Trap: use moles (the volume cancels), and update both terms.
7. Titration curves and indicators. Equivalence pH from hydrolysis; indicator range in the jump. Trap: phenolphthalein for weak acid-strong base, not methyl orange.
8. Ksp and solubility. Ksp = (xs)ˣ(ys)ʸ. Trap: compare s, not Ksp, across salt types.
9. Common ion and precipitation. Qsp after mixing > Ksp. Trap: mixing two solutions halves both concentrations.
10. Selective precipitation and pH (JEE Advanced). The ion needing less precipitant comes out first; hydroxides start at a pH set by Ksp. Trap: square or cube roots for 1:2 or 1:3 salts.

Worked examples

Example 1 (level 3, buffer after acid). A buffer has 0.1 mol CH₃COOH and 0.1 mol CH₃COONa in 1 L (pKa 4.74). Find the pH after adding 0.02 mol HCl. Solution. H⁺ turns acetate into acid: acid 0.12, salt 0.08. pH = 4.74 + log(0.08/0.12) = 4.74 − 0.176 = 4.56. The same HCl in pure water would give pH 1.7.

Example 2 (level 4, salt hydrolysis). Find the pH of 0.1 M NH₄Cl (pKb of NH₃ = 4.74). Solution. Strong acid + weak base: pH = 7 − ½pKb − ½log C = 7 − 2.37 − ½(−1) = 5.13.

Example 3 (level 4, very dilute acid). Find the pH of 10⁻⁷ M HCl. Solution. Let [H⁺] = x; from water, [OH⁻] = x − 10⁻⁷. x(x − 10⁻⁷) = 10⁻¹⁴ gives x = 10⁻⁷ × (1 + √5)/2 = 1.62 × 10⁻⁷. pH = 6.79.

Example 4 (level 5, selective precipitation). A solution is 0.01 M in Cl⁻ and 0.01 M in CrO₄²⁻. Ag⁺ is added slowly. Ksp: AgCl 1.8 × 10⁻¹⁰, Ag₂CrO₄ 1.1 × 10⁻¹². Which precipitates first, and what is [Cl⁻] left when the second starts? Solution. AgCl needs [Ag⁺] = 1.8 × 10⁻⁸ M; Ag₂CrO₄ needs √(1.1 × 10⁻¹²/0.01) = 1.05 × 10⁻⁵ M. AgCl first. When Ag₂CrO₄ starts, [Cl⁻] = 1.8 × 10⁻¹⁰/1.05 × 10⁻⁵ = 1.7 × 10⁻⁵ M, so over 99.8% of the chloride is already out. (This is how Mohr’s method works.)

“At the equivalence point the pH is always 7.” Only for a strong acid with a strong base. At the equivalence point of acetic acid with NaOH the flask holds sodium acetate, which is basic (pH near 8.7 for 0.05 M).

mmol
millimoles = molarity × volume in mL; the easiest unit for mixing problems
Qsp
ionic product with the current concentrations
Physical meaning
A buffer holds pH steady because it carries a reserve of both an acid and a base, ready to soak up whatever is added.

Practise

  • Work out what is in the beaker after reaction, then pick the formula.
  • Very dilute strong acid: solve x(x − C) = Kw.
  • Mixing: millimoles, then divide by the total volume.
  • NH₄Cl pH = 7 − ½pKb − ½log C; CH₃COONa pH = 7 + ½pKa + ½log C.
  • Buffer after adding acid: salt down, acid up by the same moles.
  • Selective precipitation: the smallest required precipitant concentration goes first.

Check yourself

150 mL of 0.1 M HCl is mixed with 50 mL of 0.08 M NaOH. The pH is:
2The pKa of acetic acid is 4.74. What is the pKb of acetate?
3Ksp of Mg(OH)₂ is 1.2 × 10⁻¹¹. Precipitation from 0.12 M Mg²⁺ starts at pH about:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Equilibrium (ionic equilibrium); question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.