All lessons

Module 47: Solid state and surface chemistry · Lesson 47.2 · about 24 min

Solid state and surface chemistry: question types and traps

Every way KEAM, CUSAT, COMEDK and JEE ask about solids and surfaces: counting atoms, formula from lattice sites and voids, density, radius and edge length, packing, radius ratio, defects, adsorption isotherms and colloids, each with a method and its trap. Then practise.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Chemistry · Class 12 · about 24 minutes. Read Solid state and surface chemistry first. Here are the question types, worked examples and practice.

Solid state questions reduce to two moves: count what is in one cell (with the 1/8, 1/4, 1/2, 1 shares), and find the line where atoms touch. Surface chemistry questions test a handful of rules: exothermic adsorption, Freundlich's straight line and Hardy-Schulze.

The question types

1. Counting atoms (Z). Corner 1/8, edge 1/4, face 1/2, body 1. Trap: in an hcp cell (hexagonal prism) the corner share is 1/6, giving 6 atoms.
2. Formula from sites and voids. Count each kind of atom per cell, or use N octahedral and 2N tetrahedral voids. Trap: "removed along one body diagonal" removes 2 corners and the body centre.
3. Density, edge, molar mass, N_A. d = ZM/(N_A a³). Trap: pm to cm is 10⁻¹⁰, and cube it.
4. Radius and edge. Touching line: edge, face diagonal or body diagonal. Trap: for NaCl, a = 2(r₊ + r₋); for CsCl, √3a = 2(r₊ + r₋).
5. Packing efficiency and voids. 52.4, 68, 74%. Void sizes: tetrahedral 0.225r, octahedral 0.414r.
6. Defects and properties. Which defect changes density; colour centres; n- and p-type; kinds of magnetism.
7. Adsorption isotherms. Freundlich slope 1/n; physisorption vs chemisorption with temperature. Trap: the slope is 1/n, not n.
8. Colloids. Charge of common sols, Hardy-Schulze order, flocculation value and gold number. Trap: smaller flocculation value or gold number means more effective.

Worked examples

Example 1 (level 3, formula from voids). Oxide ions form ccp. A²⁺ ions fill 1/8 of the tetrahedral voids and B³⁺ ions fill 1/2 of the octahedral voids. Find the formula. Solution. Per N oxide ions: A = (1/8)(2N) = N/4, B = (1/2)(N) = N/2. A : B : O = 1/4 : 1/2 : 1 = 1 : 2 : 4, so AB₂O₄ (a spinel; check charge: 2 + 6 − 8 = 0).

Example 2 (level 4, Avogadro number from a crystal). Copper is fcc with a = 361 pm and density 8.92 g/cm³ (M = 63.5). Find N_A. Solution. a³ = (3.61 × 10⁻⁸)³ = 4.70 × 10⁻²³ cm³. N_A = ZM/(d a³) = 4 × 63.5/(8.92 × 4.70 × 10⁻²³) = 6.06 × 10²³ mol⁻¹.

Example 3 (level 4, Schottky defects). A NaCl crystal has density 2.165 g/cm³ by X-ray (from a) but 2.160 g/cm³ by measurement. Find the fraction of sites vacant. Solution. The missing mass fraction = (2.165 − 2.160)/2.165 = 0.23% of the ion pairs are missing.

Example 4 (level 4, coagulation). Flocculation values for a negative sol: NaCl 52, BaCl₂ 0.69, AlCl₃ 0.093 mmol/L. Rank coagulating power. Solution. Power is the inverse of flocculation value: AlCl₃ > BaCl₂ > NaCl, roughly 560 : 75 : 1, showing the steep charge effect.

“Packing efficiency depends on the size of the atom.” It is pure geometry. Any fcc metal fills 74%, whether its atoms are big or small. Only mixed structures with two sizes (ionic crystals) depend on the radius ratio.

Share counts
corner 1/8, edge 1/4, face 1/2, body 1 (cubic cells)
Void sizes
tetrahedral fits a sphere of 0.225r, octahedral 0.414r
Physical meaning
The cell is the repeating tile; every bulk property is its contents divided by its size.

Practise

  • Count shares carefully; check charge balance on the final formula.
  • d = ZM/(N_A a³) can be turned round to find N_A, M, a or Z.
  • Know the touching line for sc, bcc, fcc, NaCl and CsCl.
  • Schottky lowers density; Frenkel keeps it; metal excess gives F-centres and colour.
  • Freundlich slope = 1/n; physisorption falls with temperature.
  • Hardy-Schulze: charge opposite to the sol, higher is stronger; smaller gold number, better protector.

Check yourself

1Atoms of A sit at the corners and atoms of B at the face centres of a cube. The formula is:
2In the same compound, if all the atoms from one face centre are removed, the formula becomes:
3The packing efficiency of a bcc lattice is about:

Sources

  • JEE Main and JEE Advanced 2026 syllabi; KEAM, CUSAT CAT and COMEDK chemistry syllabi; question patterns studied from published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.