All lessons

Module 10: Elasticity of solids · Lesson 10.2 · about 26 min

Elasticity of solids: question types and traps

Every way entrance exams ask about elasticity: stress, strain and Young's modulus, ratio questions, bulk and shear moduli, Poisson's ratio, stress-strain graphs, elastic energy, wires in series and parallel, own weight, thermal stress, rotating rods and sudden loads, each with a method and its trap.

Key points, meanings and formulas on one page: choose "Save as PDF" in the print box.

Physics · Class 11 · about 26 minutes. Read the lesson Elasticity of solids first. Here you meet every question type, with a worked example and the trap, then practise.

Elasticity questions reward one habit: write ΔL = FL/(AY) (or its cousins for B and η) and read off what changes. Then treat every wire as a spring of k = YA/L, and the harder problems become spring problems.

The ten question types

1. Direct Y = FL/(AΔL). Trap: diameter instead of radius in A, or mm not converted to m.
2. Ratio questions. ΔL ∝ FL/(d²Y). Same volume, twice the length: area halves, so ΔL becomes 4 times. Trap: missing the area change when the volume is fixed.
3. Bulk and shear. ΔV/V = ΔP/B; shear angle = (F/A)/η. Compression at depth uses ΔP = ρgh.
4. Poisson's ratio. Change in diameter or volume of a stretched wire; limits −1 to 0.5. Trap: sign of the sideways strain.
5. Stress-strain graphs. Steeper line = larger Y; longer plastic region = more ductile; loop area = heat lost.
6. Elastic energy. ½FΔL, ½ stress × strain × volume. Trap: using FΔL (that is the work by a constant load, twice the stored energy).
7. Wires in series and parallel. k = YA/L. Two wires holding a rod level: equal extension means equal FL/(AY).
8. Own weight and accelerating wires. Own weight: ρgL²/2Y. In a lift accelerating up at a: tension m(g + a). Trap: forgetting the wire's own weight adds half to the extension, not all.
9. Thermal stress. YαΔT, force YAαΔT; with a small gap, only the part beyond the gap is squeezed.
10. Rotating bodies and composites. Tension in a spinning rod or ring; composite rods share force in series or extension in parallel.

Worked examples

Example 1 (level 3, same volume). A wire is drawn out to twice its length, keeping its volume fixed. By what factor does its extension under the same load change?

Solution. Volume fixed: L doubles, so A halves. ΔL ∝ L/A, so ΔL becomes 2/(1/2) = 4 times. Trap: answering 2.

Example 2 (level 4, rod on two wires). A light rod 1 m long hangs level from two wires at its ends: steel (Y = 2 × 10¹¹ Pa) and brass (Y = 1 × 10¹¹ Pa), same length and same area. Where on the rod should a load hang so that it stays level?

Solution. Equal extensions need Fs/Ys=Fb/Yb, so Fs=2Fb. Torques about the load point: Fsx=Fb(1−x), so 2x = 1 − x and x = 1/3 m from the steel wire.

Example 3 (level 4, thermal stress with a gap). A 2 m steel rod (α = 1.2 × 10⁻⁵ /°C, Y = 2 × 10¹¹ Pa) is fixed at one end with a 0.6 mm gap before a rigid wall at the other. It is heated by 50 °C. Find the stress in it.

Solution. Free expansion = 2 × 1.2 × 10⁻⁵ × 50 = 1.2 mm. The gap takes 0.6 mm; the wall stops the other 0.6 mm. Strain = 0.6 mm/2 m = 3 × 10⁻⁴. Stress = 6 × 10⁷ Pa.

Example 4 (level 5, rotating rod). A uniform rod of length L, density ρ and Young’s modulus Y spins about one end at ω in a horizontal plane. Find its total extension.

Solution. Tension at distance x from the axis: T(x)=12ρAω2(L2−x2). Each piece dx stretches Tdx/(AY). Total: ΔL=ρω22Y∫0L(L2−x2)dx=ρω2L33Y.

“Young’s modulus of a wire changes if you change its length or thickness.” Y belongs to the material. Change the size and the extension changes, but Y stays the same. Only temperature (Y falls slightly as metals warm) and impurities change it.

Spring view
k = YA/L for stretching; series wires add 1/k, parallel wires add k
Varying tension
when tension changes along a wire, add up T dx/(AY)
Physical meaning
Stored energy is half of load × extension because the load grows from zero while the wire stretches.

Practise

The set climbs from level 1 to level 5 and includes numericals, assertion-reason, statements, matching lists, multi-correct and passage questions. Templates give new numbers each time.

  • Ten types: direct Y, ratios, bulk and shear, Poisson, graphs, energy, series and parallel, own weight, thermal stress, rotating and composite.
  • Same volume and twice the length: four times the extension.
  • Level rod on two wires: equal F/(Y A/L), then torques.
  • Thermal stress with a gap: only the expansion beyond the gap is strain.
  • Spinning rod: ΔL = ρω²L³/3Y.

Check yourself

1A wire stretches 1 mm under a load. The same load on a wire of the same material, twice as long and twice the diameter, stretches it by:
2The energy stored per unit volume in a stretched wire is:
3The bulk modulus of an ideal gas compressed slowly at constant temperature equals:

Sources

  • JEE Main, JEE Advanced 2026 and NEET (UG) syllabi: Properties of solids; question patterns studied from the exams' published papers (no questions copied)

Your ticks stay in this browser. Save them as a file on the course home.

Updated 2026-11-22. Syllabus and exam patterns follow the official notices checked on 2026-11-22; they can change every year, so check the official exam website. All questions are original fibub work, not copied from past papers or books. Nothing you do here is sent anywhere.